KPN usb-modem Bedienungsanleitung
KPN USB-modem
User Manual
2
1 Modem Introduction 3
1.1 Introduction 3
1.2 Warning and Notice 3
1.3 Applicability Scope 4
1.4 System requirements 4
1.5 Functions 4
1.6 Specification 5
1.7 LED indications 6
2 Installation 7
2.1 Outline and Part Introduction 7
2.2 Hardware Installation 7
2.3 Software Installation 9
2.4 Run the Application Software 13
2.5 Hardware Uninstall 13
2.6 Software Uninstall 14
3 Functions & Operation 16
3.1 Interface introduction 16
3.1.1 Main Interface 16
3.1.2 Description of Mini Icons 17
3.2 Connecting Internet 19
3.3 SMS 20
3.3.1 Read SMS 22
3.3.2 Create new message 22
3.3.3 The SMS box Operating Guide 24
3.4 Phonebook 25
3.5 Settings 26
3.5.1 Connection Settings 27
3.5.2 Security Settings 28
3.5.3 Network Settings 29
3.5.4 Messages Settings 31
3.5.5 Alert settings 32
3.6 MicroSD card 32
3.7 Help 32
4 FAQ & Answers 33
Contents
3
1.1 Introduction
Thank you for using KPN USB-modem.
To guarantee the modem always in its best condition, please read this manual carefully and keep it for further use.
The pictures, symbols and contents in this manual are just for your reference. They might not be completely
identical with your modem. We operate a policy of continuous development. We reserve the right to update the
technical specifications in this document at any time without prior notice.
The KPN USB-modem is a type of multi-mode, 3G modem, suitable for GSM/GPRS/WCDMA/EDGE/HSDPA network.
It adopts USB interface which provides an easy interface to laptop and desktop PC. With the GSM/ GPRS/ EDGE/
WCDMA/ HSDPA mobile network, it can help you carry out SMS, data service and will help you break away from
the limit of time and zone, and realize wireless communication at any moment everywhere.
1.2 Warning and Notice
To the owner:
• Some electronic devices are susceptible to electromagnetic interference sent by modem if inadequately shielded,
such as electronic system of vehicles. Please consult the manufacturer of the device before using the modem if
necessary.
• Operating of laptop and desktop PC and modem may interfere with medical devices like hearing aids and
pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are
turned on. Turn the modem off if necessary. Consult a physician or the manufacturer of the medical device before
using the modem.
• Be aware of the usage limitation when using a modem at places such as oil warehouses or chemical factories,
where there are explosive gases or explosive products being processed. Therefore, turn off your modem if required.
• Don’t touch the inner antenna area if not necessary. Otherwise it will affect your modem’s performance.
• Store the modem out of the reach of little children. The modem may cause injury if used as a toy.
1 Modem Introduction
4
Modem:
• Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect
your modem’s performance, and violate related national regulations about telecom terminals.
• Avoid using the modem near metallic structure device or establishment that can emit electromagnet wave.
Otherwise it may influence receiving signals.
• The modem is non-waterproof type, please keep it dry and store in shady and cool place.
• Don’t use the modem immediately after a sudden temperature change. In such case, it will produce dew inside and
outside the modem, so don’t use it until it becomes dry.
• Take the modem carefully. Don’t lose, bend or cause it struck. Otherwise it will lead to destruct damage.
• No dismantling by non-professional and only qualified maintainer can undertake repair work.
1.3 Applicability Scope
KPN USB-modem supports the present mainstream types of laptops and desktop PCs, such as HP, IBM, Toshiba,
Lenovo, Dell, Sony, etc.
1.4 System requirements
Operating SystemÐWindows 2000 / XP / Vista, and MAC OS X 10.3, 10.4 en 10.5.
Configuration (Recommended):
CPU 500MHz Pentium or above
Hard Disk 20 M or above
RAM 128 M or above
The performance of the modem may be influenced if configuration is under the recommended requirement.
1.5 Functions
Functions: SMS service, data service, applied management, data concurrence, support MicroSD card, etc.
5
1.6 Specification
Networks
Frequency Band
Dimension
Weight
Data Rate
Working Voltage
Current Loss
Max
Emission Power
Interface type
Supported systems
Supported
operating systems
Functions
Micro-SD memory card
Netwerk standards
Frequency bands
Temperature
HSDPA/UMTS/GSM/GPRS/EDGE
HSDPA/UMTS 2100 MHz:
1920 MHz-1980 MHz/2110 MHz-2170 MHz (Up/Down-Link)
GSM/GPRS/EDGE 900 MHz: 880 MHz-915 MHz/925 MHz-960
MHz (Up/Down-Link)
GSM/GPRS/EDGE 1800 MHz: 1710 MHz-1785
MHz/1805 MHz-1880 MHz (Up/Down-Link)
GSM/GPRS/EDGE 1900 MHz: 1850 MHz-1910
MHz/1930 MHz-1990 MHz (Up/Down-Link)
82 mm x 28 mm x 12 mm
55 g
IIn HSDPA Mode, max download speed 7.2Mbps
In UMTS Mode, max speed 384 Kbps
In EDGE modeÐmax speed 236.8Kbps
5V (Using the laptop or desktop PC power supply)
Average: 500mA
In 3G WCDMA Mode: 250mW
In 2G GSM/GPRS Mode: 2W
USB standard (1.0 and 2.0)
Support for the most laptops en desktop PC’s
Windows 2000, XP SP2, Vista
Apple MAC OS X 10.3, 10.4, 10.5
SMS service, data service, internet, applied management,
data concurrence, support MicroSD card
Support upto 4GB memory capacity
HSDPA/UMTS/EDGE/GPRS/GSM
HSDPA/UMTS 2100MHz,
GSM/GPRS/EDGE 900/1800/1900MHz
-20°C ~ +60°C
6
1.7 LED indications
In the USB-modem there is a multi-colour-LED (light), which shows the status of the modem, using different co-
lours and flash-signalling. In this table below an explanation is given of all different situations:
LED indication:
Red
Green blinking
Green burning
Purple blinking
Purple burning
Blue burning
Light-Blue burning
USB-modem working status:
Error Status, or Modem not ready yet, busy starting up
Attached to GPRS or EDGE network
Active connection via GPRS or EDGE network
Attached to UMTS or HSDPA network
Active connection via UMTS network
Active connection via HSDPA network
Micro-SD memory-card found and ready to use
7
2.1 Outline and Part Introduction
1. USIM/SIM Card Slot
2. MicroSD Card Slot
3. USB Port
4. Modem Cover
2.2 Hardware Installation
1. Insert the SIM/USIM card into the USB-modem::
First, you should insert your SIM/USIM card into the USB-modem, and confirm that your SIM/USIM card support data
service, Internet, UMTS and HSDPA etc. If you have questions on this, please consult the shop or KPN help desk.
To install SIM/USIM card, first take down the modem cover, then the USB connector is visible.
Pull the plastic socket above the USB connector a little out.
2 Installation
8
Then insert the SIM/USIM card as deep as possible into the socket, here make sure that metal contact facing to the
modem. Please refer to the following picture, insert the SIM/USIM card smoothly into the modem, with the
cutted edge into the stick. Insert the (U)SIM so deep into the modem that it falls completely within the housing
of the modem, and let the small plastic socket give a small click to fall into the right position.
2. Install memory card
Even more you can do with this stick, you can use a compatible MicroSD card to save more data. Only MicroSD
card is supported by the modem and do not use other memory card in the modem. Install Micro-SD memory-card
in the USB-modem, if you want to use it.
Open the MicroSD card cover. Insert the MicroSD card into the slot. Make sure the metal contact side of the memory
card facing the modem shown as the following picture.
Then close the MicroSD card slot cover.
The driver of the MicroSD card will installed automatically when the modem driver is installed
Note: maximum 4GB MicroSD card is supported.
9
3. Connect the USB-modem to your PC:
• Then connect the USB-modem to the USB port and ensure that it is tightly inserted.
• The modem will be automatically recognized.
• The system will automatically detect and recognize the new hardware and display the new icon in the desktop
status bar, indicating that the computer and the USB-modem have been connected properly. After a few
seconds, the installation program will start automatically.
2.3 Software Installation
The system will automatically detect and recognize the new hardware and display the new icon in the desktop
status bar, indicating that the computer and the USB-modem have been connected properly. After a few seconds,
there will show the following installation interface if the laptop and desktop PC supports automatic installation.
If the laptop and desktop PC doesn’t support automatic installation, start the installation program by run the
“
AutoRun.exe” from the CD-ROM drive. The following installation interface will show how to start installation.
Select the language according to the operating system and click “Next”. and then you will see the following
screen will popup:
Choose the language then click “OK”. the following screen will shows up:
10
Strongly recommend you to exit “Windows” programs, and click “Next”.
Read the agreement carefully. If you agree, choose “I accept the terms of the license agreement”,
and then click “Next”.
Andere Handbücher für usb-modem
2
Inhaltsverzeichnis
Andere KPN Modem Handbücher
KPN
KPN usb-modem Gebrauchsanweisung
KPN
KPN Experia Box v10 Installationsanleitung
KPN
KPN E160 Gebrauchsanweisung
KPN
KPN MIM802 Gebrauchsanweisung
KPN
KPN USB-Modem 2 Gebrauchsanweisung
KPN
KPN Experia Box v10 Installationsanleitung
KPN
KPN usb-modem Bedienungsanleitung
KPN
KPN Experia Box v10A Installationsanleitung
KPN
KPN Experia Box v10A Installationsanleitung
Beliebte Modem Handbücher anderer Marken
Davicom
Davicom DM562AP Bedienungsanleitung
EpiValley
EpiValley TATA indicom SXC-1080 Bedienungsanleitung
Zte
Zte WiMAX Bedienungsanleitung
Intelimax
Intelimax MA-2060 Bedienungsanleitung
SMC Networks
SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch
Telstra
Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung
US Robotics
US Robotics 3453C Bedienungsanleitung
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung
Zte
Zte MF823 Bedienungsanleitung
Four-Faith
Four-Faith F1403 Bedienungsanleitung
Sierra Wireless
Sierra Wireless AIRLINK MP595W Bedienungsanleitung
Gemtek
Gemtek WiMAX WIXFBR-103 Bedienungsanleitung