Kramer 810 Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

810

Color Bar/Audio Generator

P/N: 2900-006003 Rev 2

810 – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 3

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Defining the 810 Color Bar/Audio Generator 4

4Connecting the 810 5

5Adjusting the Audio Level 6

6Technical Specifications 7

Figures

Figure 1: 810 Color Bar/Audio Generator 4

Figure 2: Connecting the 810 Color Bar/Audio Generator 5

Figure 3: Underside of the 810 Color Bar/Audio Generator 6

810 - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer 810 Color Bar/Audio Generator, which

is ideal for:

Testing and aligning video equipment, including monitors, recorders and

projectors

810 - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer 810 away from moisture, excessive sunlight and dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

810 - Getting Started

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility.

810 - Overview

3 Overview

The 810 is a high−performance composite video and s−Video (Y/C) color bar and

1kHz audio tone generator. It outputs two composite video and one s−Video color

bar signal in either NTSC or PAL, and a 1kHz audio tone simultaneously.

In addition, the 810 Color Bar/Audio Generator:

Provides a 1kHz balanced or unbalanced audio output for audio equipment

alignment

Enables you to determine the video output standard, PAL or NTSC, by using

the PAL/NTSC selector switch

3.1 Defining the 810 Color Bar/Audio Generator

This section defines the 810.

Figure 1: 810 Color Bar/Audio Generator

Feature

Function

12V DC

+12V DC connector for powering the unit

OUT 1 BNC Connector

2 Composite video outputs

OUT 2 BNC Connector

Y/C OUT 4-pin Connector

s-Video output

1 kHz OUT 3-PIN Terminal Block

Connector

Balanced (or unbalanced) audio output

ON LED

Illuminates when receiving power

PAL / NTSC Selector Switch

Selects PAL when released; selects NTSC when pushed in

810 - Connecting the 810

4 Connecting the 810

Always switch off the power to each device before connecting it to your

810. After connecting your 810, connect its power and then switch on

the power to each device.

To connect the 810 as illustrated in the example in Figure 2:

1. Connect the composite video BNC OUT 1 connector to the composite

acceptor (for example, a video display).

2. Connect the composite video BNC OUT 2 connector to the composite

acceptor (for example, a composite video recorder).

3. Connect the s-Video (Y/C) 4P Y/C OUT connector to the s-Video (Y/C)

acceptor (for example, an s-Video display).

4. Connect the 3-wire cable to the detachable terminal block 1 kHz OUT

connector and to the audio input of the destination unit.

5. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity.

Figure 2: Connecting the 810 Color Bar/Audio Generator

810 - Adjusting the Audio Level

5 Adjusting the Audio Level

The audio level of the 810 is pre-set at the factory at 4dBm. However, you can

adjust the audio level on your 810 Color Bar/Audio Generator, if you wish.

To adjust the audio level:

1. Insert a screwdriver into the small hole on the underneath of the 810 Color

Bar/Audio Generator, enabling access to the trimmer.

2. Carefully rotate the screwdriver, trimming the 810unit and adjusting the

audio level, as required.

Figure 3 illustrates the position of the small hole on the underneath of the 810

Color Bar/Audio Generator:

Figure 3: Underside of the 810 Color Bar/Audio Generator

810 - Technical Specifications

6 Technical Specifications

VIDEO OUTPUTS:

2 x 75% color bar on BNC connectors; 1Vpp/75Ω

1 x 75% s-Video color bar on 4P connector, 1Vpp/75Ω

(luma)

AUDIO OUTPUTS:

1kHz, 4dBm/47Ω balanced audio on detachable terminal

block

CONTROL:

PAL/NTSC selector switch

VIDEO S/N RATIO:

62dB

LINE JITTER:

2ns

POWER CONSUMPTION:

12V DC, 260 mA

OPERATING TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE TEMPERATURE:

-40° to +70°C (-40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

12 cm x 7.5 cm x 2.5 cm (4.7 inch x 2.95 inch 0.98 inch,

W, D, H)

WEIGHT:

0.3 kg (0.67 lbs.) approx.

INCLUDED ACCESSORIES:

Power supply

Andere Handbücher für 810

Inhaltsverzeichnis

Andere Kramer Wechselrichter Handbücher

Kramer

Kramer TOOLS 810B Bedienungsanleitung

Kramer

Kramer FC-46xl Bedienungsanleitung

Kramer

Kramer SG-6005XL Bedienungsanleitung

Kramer

Kramer 840HDMI Bedienungsanleitung

Kramer

Kramer 841 Bedienungsanleitung

Kramer

Kramer DigiTOOLS 820 Bedienungsanleitung

Kramer

Kramer 840H Bedienungsanleitung

Kramer

Kramer 840Hxl Bedienungsanleitung

Kramer

Kramer SG-6006 Bedienungsanleitung

Kramer

Kramer MultiTOOLS 850 Bedienungsanleitung

Kramer

Kramer VP-800 Bedienungsanleitung

Kramer

Kramer DigiTOOLS 840 Bedienungsanleitung

Kramer

Kramer SG-6005 Bedienungsanleitung

Kramer

Kramer 811 Bedienungsanleitung

Kramer

Kramer SG-6005XL Bedienungsanleitung

Kramer

Kramer TOOLS 810B Bedienungsanleitung

Kramer

Kramer 860 Bedienungsanleitung

Kramer

Kramer VA-2002 Bedienungsanleitung

Beliebte Wechselrichter Handbücher anderer Marken

Fourgroup

Fourgroup Easy Bedienungsanleitung

Velleman

Velleman PI300M Bedienungsanleitung

Sungrow

Sungrow SG350HX-US Bedienungsanleitung

WilTec

WilTec 61897 Bedienungsanleitung

SMA

SMA SUNNY BOY STORAGE 2.5 Bedienungsanleitung

Simplicity

Simplicity LANDLORD 316 Bedienungsanleitung

Santak

Santak SMAX 3000 Bedienungsanleitung

ATON

ATON RA.Store-3 Bedienungsanleitung

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Bedienungsanleitung

Tektronix

Tektronix CFG250 Bedienungsanleitung

Champion

Champion 200989 Bedienungsanleitung

Vanner

Vanner 20-500 Series Bedienungsanleitung

GE GEP Bedienungsanleitung

Astrel Group

Astrel Group Power Reducer Kurzanleitung

MULTIQUIP

MULTIQUIP GDP-5H Leitfaden

GoWISE

GoWISE PS1007 Bedienungsanleitung

Promate

Promate PM13500D ES Bedienungsanleitung

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Bedienungsanleitung