Kramer SPK-W411T Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

SPK-W411T

On-Wall Speakers

P/N: 2900-300252 Rev 2

SPK-W411T – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Recycling Kramer Products 3

3Overview 4

3.1 Defining the SPK-W411T 5

4Installing the SPK-W411T 6

4.1 Choosing the Best Location 6

4.2 Installing the Speaker Wires 6

4.3 Installing the Mounting Bracket 7

4.4 Array Installation 9

4.5 SPK-W411T Setup 11

5Technical Specifications 12

Figures

Figure 1: SPK-W411T 5

Figure 2: Adjust Tap Selector 7

Figure 3: SPK-W411T with Brackets Connected 8

Figure 4: Square Layout 9

Figure 5: Hexagonal Layout 9

Figure 6: Square Layout Parallel Wiring 10

Figure 7: SPK-W411T Installed 11

SPK-W411T - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:

Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Products.

Congratulations on purchasing your Kramer SPK-W411T On-Wall Speakers,

which are ideal for:

•Home theater sound systems

•Multimedia systems

2 SPK-W411T - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Do not secure the cables in tight bundles or roll the slack into tight coils

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer Speakers away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

SPK-W411T - Getting Started 3

2.2 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

4 SPK-W411T - Overview

3 Overview

The SPK-W411T includes a pair of high performance indoor on-wall speakers that

can be mounted on the wall vertically or horizontally. The mounting brackets are

made of painted steel that can be attached to each speaker, letting you rotate

each speaker to the left or right. The SPK-W411T speakers feature a multi tap

power transformer for selecting 8Ω (bypassing the transformer) or 70V/100V

power settings that are suitable for an array installation.

SPK-W411T - Overview 5

3.1 Defining the SPK-W411T

This section defines the SPK-W411T:

Figure 1: SPK-W411T

# Feature Function

1 Mounting screw opening Provides the ability to hang the Speaker on the wall

2 Tap Selector Adjust each speaker to the appropriate tap setting:

For 70V, 1.2W, 2.5W or 5W; for 100V, select 2.5W, 5W

or 10W or select 8Ω(to bypass the transformer when

connecting directly to an amplifier without using the

70/100V array option)

3 Input and Output

Terminal Block

Connectors

One +, - pair for the input and the other pair to output to

the next speaker in an array configuration (see Section

4.4

)

Bracket Use to mount the speaker onto the wall

5 Bracket Knobs (2) Use two knobs to fasten the bracket to the speaker

6 Tweeter Reproduces the higher frequency sounds

7 Bass Port Enforces the low-frequency sounds

8 Speaker Grille Protects the internal components of the speaker from

foreign objects.

Do not remove from the speakers

9 Woofer Driver Reproduces low frequencies

6 SPK-W411T - Installing the SPK-W411T

4 Installing the SPK-W411T

This section explains how to:

•Choose the best location for your speakers (see Section 4.1

•Install the speaker wires (see

)

Section 4.2

•Install the mounting brackets (see

)

Section 4.3

•Setup an array installation (see

)

Section 4.4

•Install the SPK-W411T (see

)

Section 4.5

4.1 Choosing the Best Location

)

Before installing the speakers:

•Experiment by placing the speakers in different locations before finally

deciding on the most suitable location

•Be sure that the wall type is appropriate for the mounting brackets, that is,

either solid wood, bricks, concrete, hollow building blocks, or wood studs

•Check that the mounting location is free of obstructions, such as electrical

piping, AC ducts or water lines, and so on

4.2 Installing the Speaker Wires

To install the speakers, do the following:

1. Prepare the wires for the speakers:

Cut the wires to similar lengths

For achieving high quality sound

Measure the length from each speaker to the receiver, and cut the

wires accordingly, adding some access wire length to let you easily

remove the speakers from the bracket without having to disconnect the

input wires

The distance should measure up to about 4 meters (13 feet)

2. Strip the ends of the wires to expose a length of approximately 3/8 inch.

SPK-W411T - Installing the SPK-W411T 7

3. Pass the speaker wires through the round hole in the mounting bracket (see

Section 4.3

4. Adjust each speaker to the appropriate tap setting (see

Figure 2).

Set the tap according to the power requirements of the speaker based on its location in the

room (for example, a speaker located in a remote corner may require additional power)

Figure 2: Adjust Tap Selector

5. Connect one of the + and – terminal block pairs on the rear panel (see

Figure 1) by connecting the:

Wire from the negative terminal on the receiver into the negative

terminal block of the speaker

Wire from the positive terminal on the receiver into the positive terminal

block of the speaker

6. Repeat step 5 for the other speaker (see Figure 7).

7. If required, connect the + and - terminal blocks to the + and - terminal blocks

to an adjacent speaker (as illustrated in the example in Figure 6).

4.3 Installing the Mounting Bracket

To install the mounting brackets, do the following:

1. Mark the location of the mounting holes on the wall.

2. Screw the mounting screws onto the wall at the location that you want to

mount the speakers.

If the location is backed by wall studs, you can use the wood screws

provided. If the location is backed by a gypsum board, use wall anchors (not

included in the package).

Inhaltsverzeichnis

Andere Kramer Sprecher Handbücher

Kramer

Kramer Galil 6-AW Bedienungsanleitung

Kramer

Kramer Tavor 5-O Bedienungsanleitung

Kramer

Kramer Galil 6-AW Bedienungsanleitung

Kramer

Kramer SPK-C411 Bedienungsanleitung

Kramer

Kramer Yarden IH-1 Bedienungsanleitung

Kramer

Kramer Yarden 6-ID SPK-I651T-KI Bedienungsanleitung

Kramer

Kramer SPK-W611 Bedienungsanleitung

Kramer

Kramer SPK-OCA508 Bedienungsanleitung

Kramer

Kramer KADS-100 Bedienungsanleitung

Kramer

Kramer SPK-CCF848 Bedienungsanleitung

Kramer

Kramer SPK-W612 Bedienungsanleitung

Kramer

Kramer SPK-C612 Installations- und Betriebshandbuch

Kramer

Kramer SPK-CC678 Bedienungsanleitung

Kramer

Kramer SPK-C812 Bedienungsanleitung

Kramer

Kramer SPK-OC508 Bedienungsanleitung

Kramer

Kramer SWM-1 Bedienungsanleitung

Kramer

Kramer SPK-OC608 Bedienungsanleitung

Kramer

Kramer Galil 2-C Bedienungsanleitung

Kramer

Kramer SPK-C613 Bedienungsanleitung

Kramer

Kramer Galil 6-C Bedienungsanleitung

Kramer

Kramer SPK-C613 Bedienungsanleitung

Kramer

Kramer Yarden 4-O Bedienungsanleitung

Kramer

Kramer SPK-W613 Bedienungsanleitung

Kramer

Kramer SPK-CC688 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung