Kramer VP-81K Bedienungsanleitung

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VP-81K

8x1 UXGA/Audio Switcher

P/N: 2900-000387 Rev 3

VP-81K – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1Achieving the Best Performance 2

3Overview 3

3.1DDC Support 4

3.2Defining EDID 4

3.3Defining the VP-81K 8x1 UXGA/Audio Switcher 4

3.4Using the IR Transmitter 7

4Installing in a Rack 8

5Connecting the VP-81K 9

5.1Connecting the Balanced/Unbalanced Stereo Audio Output 10

5.2Controlling via RS-232 11

5.3Connecting a PC or Controller to the RS-485 Port 12

5.4Controlling the VP-81K via the Ethernet Port 12

5.5DIP-Switch Settings 18

5.6Cascading Machines 18

6Operating Your VP-81K 8x1 UXGA/Audio Switcher 20

6.1Using the Front Panel Input Selector Buttons 20

6.2Using the Regular or Automatic Switching Mode 20

6.3Using the Audio-Follow-Video/Breakaway Modes 21

6.4Setting the Audio Gain 22

7Technical Specifications 23

8Communication Parameters 24

9Table of ASCII Codes for Serial Communication (Protocol 3000) 25

10Table of Hex Codes for Serial Communication (Protocol 2000) 26

11Kramer Protocol 28

11.1Switching Protocols 28

11.2Kramer Protocol 3000 29

11.3Kramer Protocol 2000 36

Figures

Figure 1: VP-81K 8x1 UXGA/Audio Switcher Front Panel 5

Figure 2: VP-81K 8x1 UXGA/Audio Switcher Rear Panel 6

Figure 3: Connecting the VP-81K 10

Figure 4: Connecting an Balanced Stereo Audio Output 10

Figure 5: Connecting an Unbalanced Output 10

Figure 6: Crossed Cable RS-232 Connection 11

Figure 7: Straight Cable RS-232 Connection with a Null Modem Adapter 11

Figure 8: Local Area Connection Properties Window 13

Figure 9: Internet Protocol (TCP/IP) Properties Window 13

Figure 10: Connect Screen 14

Figure 11: Device Properties Screen 15

Figure 12: HOME Embedded Web Page 16

Figure 13: CONFIGURATIONS Embedded Web Page 17

Figure 14: SETUP DIP-Switches 18

Figure 15: Control Configuration via RS-232 and RS-485 19

VP-81K - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix

Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;

GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;

GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and

GROUP 11: Sierra Products.

Congratulations on purchasing your Kramer VP-81K 8x1 UXGA/Audio Switcher,

which is ideal for the following typical applications:

Display systems requiring simple input selection

Remote monitoring of computer activity in schools and businesses

Rental/staging applications

Multimedia and presentation source selection

2 VP-81K - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Use Kramer high performance high resolution cables

Use only the power cord that is supplied with this machine

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer VP-81K away from moisture, excessive sunlight and

dust

VP-81K - Overview 3

3 Overview

The VP-81K is a high-performance switcher for computer graphics video signals,

with resolutions up to and exceeding UXGA, and unbalanced stereo audio signals.

The unit can switch any one of eight inputs to two identical video outputs, one

balanced and one unbalanced stereo audio outputs.

The VP-81K features:

Very high video bandwidth, ensuring transparent UXGA performance

Audio-follow-video (AFV) in which all operations relate to both the video and

the audio channels, or audio breakaway option, in which video and audio

channels switch independently

Volume control

DDC (Display Data Channel) communication between the selected input and

output 1 high-density 15-pin HD connectors on pins 12 and 15

KR-ISP™ technology, innovative integrated sync processing that lets you

achieve a sharp, stable image even when the sync level is too low, by

restoring the sync signal waveform

The cascade of up to eight units with control from a PC or serial controller

Automatic switching mode (as well as the regular switching mode),

automatically switching to the lowest number input when that input is

connected and active

For example, if INPUT 6 is currently selected and connected and then INPUT 4

receives an active signal, the VP-81K automatically switches to INPUT 4.

Control the VP-81K using the front panel buttons, or remotely via:

RS-485 or RS-232 serial commands transmitted by a touch screen system,

PC, or other serial controller

Ethernet

The Kramer RC-IR3 Infrared Remote Control Transmitter or infrared remote

extension cable transmitter (optional)

4 VP-81K - Overview

3.1 DDC Support

When establishing a VGA connection between a PC or laptop and a display device, a

set of parameters known as EDID is exchanged between them, which is carried over

the DDC channel. In some PC graphic cards and laptops, this information exchange is

essential for proper VGA OUT operation.

3.2 Defining EDID

The Extended Display Identification Data (EDID) is a data-structure provided by a

display, to describe its capabilities to a graphics card (that is connected to the

display’s source). The EDID enables the VP-81K to “know” what kind of monitor is

connected to the output. The EDID includes the manufacturer’s name, the product

type, the timing data supported by the display, the display size, luminance data

and (for digital displays only) the pixel mapping data.

EDID is defined by a standard published by the Video Electronics Standards

Association (VESA).

3.3 Defining the VP-81K 8x1 UXGA/Audio Switcher

This section defines the VP-81K.

VP-81K – Overview 5

Figure 1: VP-81K 8x1 UXGA/Audio Switcher Front Panel

# Feature Function

1 POWER Switch Illuminated switch supplying power to the unit

2 IR Receiver The yellow LED is illuminated when receiving signals from the Kramer Infrared remote control transmitter

3 INPUT SELECTOR Buttons Select the input (from 1 to 8) to switch to the outputs

The button illuminates in red if it is selected and there is no input signal

The button illuminates in green if it is not selected but there is an input signal at that input

The button illuminates in violet if it is selected and there is an input signal connected

4 AUDIO Button When illuminated, actions relate to audio

If the AUDIO and VIDEO buttons both illuminate, the unit operates in the audio-follow-video mode

5 VIDEO Button When illuminated, actions relate to video

6 AUDIO

GAIN

Buttons

+ Press to increase the audio output level of the selected input (while the AUDIO button illuminates)

7 - Press to decrease the audio output level of the selected input

Figure 2: VP-81K 8x1 UXGA/Audio Switcher Rear Panel

# Feature Function

8 INPUT 15-pin HD Connectors Connect to the UXGA sources (from 1 to 8)

9 OUTPUT 15-pin HD Connectors Connect to the UXGA acceptors (from 1 to 2)

10 AUDIO INPUT Mini Plug Connectors Connect to the unbalanced stereo audio sources (from 1 to 8)

11 OUT 1 Mini Plug Connector Connect to the unbalanced stereo audio acceptor

12 OUT 2 Terminal Block Connector Connect to the balanced stereo audio acceptor

13 PROG. Button Not used (for technical staff use only)

14 Ethernet Connector Connects to the PC or other Serial Controller through computer networking

15 FACTORY RESET Button Press to reset to factory default definitions:

IP number 192.168.1.39

Mask – 255.255.255.0

Gateway – 192.168.1.1

The audio gain of all the inputs is reset to 0dB

Turn the machine OFF, then turn the machine ON while pressing the FACTORY RESET button.

The unit powers up and loads its memory with the factory default definitions

16 RS-232 9-pin D-sub Port Connects to the RS-232 9-pin D-sub port of the next unit in the daisy-chain

17 SETUP DIP-switches DIP-switches for setup of the unit, see Section 5.5

18 REMOTE IR 3.5mm Mini Jack Connect to an external IR receiver unit for controlling the machine via an IR remote controller

(instead of using the front panel IR receiver)

Can be used instead of the front panel (built-in) IR receiver to remotely control the machine, see

Section 3.4

19 RS-485 Detachable Terminal Block Port Pin # 1 is for ground connection, and Pins # 2 and # 3 are for RS-485

20 Power Connector with Fuse AC connector enabling power supply to the unit

6VP-81K – Overview

VP-81K - Overview 7

3.4 Using the IR Transmitter

You can use the RC-IR3 IR transmitter to control the machine via the built-in IR

receiver on the front panel or, instead, via an optional external IR receiver (Model:

C-A35M/IRR-50). The external IR receiver can be located up to 15 meters away

from the machine. This distance can be extended to up to 60 meters when used

with three extension cables (Model: C-A35M/A35F-50).

Before using the external IR receiver, be sure to arrange for your Kramer dealer to

insert the internal IR connection cable (P/N: 505-70434010-S) with the 3.5mm

connector that fits into the REMOTE IR opening on the rear panel. Connect the

external IR receiver to the REMOTE IR 3.5mm connector.

Andere Handbücher für VP-81K

Inhaltsverzeichnis

Andere Kramer Schalten Handbücher

Kramer

Kramer MV-6 Bedienungsanleitung

Kramer

Kramer VS-81H Bedienungsanleitung

Kramer

Kramer WP-5VH2 Bedienungsanleitung

Kramer

Kramer VP-23N Bedienungsanleitung

Kramer

Kramer VS-211XS Bedienungsanleitung

Kramer

Kramer VP-23C Bedienungsanleitung

Kramer

Kramer VP-740 ProScale Bedienungsanleitung

Kramer

Kramer VS-66FW Bedienungsanleitung

Kramer

Kramer SP-14 Bedienungsanleitung

Kramer

Kramer VP-81KSi Bedienungsanleitung

Kramer

Kramer VP-734 Bedienungsanleitung

Kramer

Kramer VP-725xl Bedienungsanleitung

Kramer

Kramer PT201VGA Bedienungsanleitung

Kramer

Kramer PSE-2 Bedienungsanleitung

Kramer

Kramer VP-31KSi Bedienungsanleitung

Kramer

Kramer VP-201xl Bedienungsanleitung

Kramer

Kramer VM-3H2 Bedienungsanleitung

Kramer

Kramer VP-440H2 Bedienungsanleitung

Kramer

Kramer VIA Collage Bedienungsanleitung

Kramer

Kramer VP-311DVI Bedienungsanleitung

Kramer

Kramer VP-214DS Bedienungsanleitung

Kramer

Kramer VS-421 Bedienungsanleitung

Kramer

Kramer VS-211UHD Bedienungsanleitung

Kramer

Kramer VP-550X Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung