Krell Industries RESOLUTION 1 Kurzanleitung
RESOLUTION SERIESLOUDSPEAKERS
Owner’s Reference
THE LEADER IN AUDIO ENGINEERING
RESOLUTION 1
RESOLUTION 2
RESOLUTION 3
RESOLUTION C
Resolution Series Loudspeakers
Resolution 1, 4-way Floor standing Loudspeaker
Resolution 2, 3-way Floor standing Loudspeaker
Resolution 3, 2-way Bookshelf Loudspeaker
Resolution C, 3-way Center Channel Loudspeaker
Owner’s Reference, v 04.0
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
E-MAIL krell@krellonline.com
WEBSITE http://www.krellonline.com
This product complies with the EMC directive (89/336/EEC) and the low-voltage directive
(73/23/EEC).
This product is manufactured in the United States of America. Krell®is a registered trademark of Krell Industries, Inc., and is restricted for use by
Krell Industries, Inc., its subsidiaries, and authorized agents. Krell HEAT™and LAT™ are trademarks of Krell Industries, Inc. All rights reserved. All
other trademarks and trade names are registered to their respective companies.
© 2004 by Krell Industries, Inc. All rights reserved P/N 307232
1
iii
Contents
List of Illustrations, page iv
SECTION ONE: About Krell, page 1
The Krell Legacy, the Resolution Series Loudspeakers,
and Definition of Terms
SECTION TWO: Unpacking and Placement, page 4
Opening the Resolution Loudspeaker Shipping Box,
Positioning the Loudspeaker, and Attaching the Grille
SECTION THREE: Anatomy of a Loudspeaker, page 10
Features and Benefits of the Resolution Design
SECTION FOUR: Connecting a Resolution Series Loudspeaker
to Your System, page 16
SECTION FIVE: Krell HEAT: Home Theater Technology, page 18
WARRANTY, page 19
RETURN AUTHORIZATION PROCEDURE, page 21
SPECIFICATIONS, page 22
Krell Resolution 1, 2, 3, and C Loudspeakers
iv
List of Illustrations
Figure 1, page 10
Resolution 1 Front and Back Panels, and Grille
Figure 2, page 11
Resolution 2 Front and Back Panels
Figure 3, page 12
Resolution 3 Front and Back Panels
Figure 4, page 12
Resolution C Front and Back Panels
Krell Resolution 1, 2, 3, and C Loudspeakers
1
SECTIONONE
About Krell
Thank you for your Resolution Series loudspeaker purchase.
This section describes the Krell Legacy, Krell’s innovative loudspeaker design and
technology, and defines key terms used in this reference.
The Krell Legacy
“I design every Krell component to set the standard
for workmanship, style, and performance.”
Dan D’Agostino
High-end audio is a demanding pursuit—an ongoing quest for excellence in
music reproduction that drives equipment manufacturers to strive for the absolute
in design and performance. With a keen understanding of this passionate drive,
Krell Industries, Inc., was founded in 1980.
For more than two decades, Krell has earned a distinguished reputation for engi-
neering innovation and product excellence. The company’s history is replete with
product introductions that have deeply impacted the high-end audio industry. The
most discriminating audiophiles and product reviewers have consistently recog-
nized Krell components for standard-setting performance.
The Lossless Acoustic Transducer (LAT) Series of loudspeakers introduced the next
era at Krell Industries —the era of loudspeaker design and manufacture. The
Resolution Series Loudspeakers apply the same technology and design principles
that are the foundation of the LAT Series. The combination of state-of-the-art
components, extremely efficient, well designed crossover networks, and beautiful-
ly crafted cabinets create a unique loudspeaker series, unlike any before.
The Resolution Series Loudspeakers
All Resolution loudspeakers feature heavily braced enclosures with 2" thick baffles
for superior vibration damping. Driver complements are matched to the enclosure
and customized to Krell’s specifications. All crossovers are highly current-capable
and designed by Krell.
continued
Krell Resolution 1, 2, 3, and C Loudspeakers
2
The 4-way floor standing Resolution 1 and the 3-way floor standing Resolution 2
loudspeakers are suited for use in 2-channel systems or as the main left and right
loudspeakers in a multi-channel home theater set-up. The 2-way bookshelf
Resolution 3 loudspeakers work well in small two-channel systems or as sur-
round loudspeakers in multi-channel home theaters. The 3-way center channel
Resolution C loudspeaker features nearly the same driver complement as the
Resolution 2, and can be operated full-range.
Unparalleled Sonic Performance
From the first Krell product—the KSA–100—to the present, Dan D’Agostino has
continually “pushed the envelope” of performance in his search for greater amplifier
power, and now, loudspeaker response. His exploration of technologies, driven by
his never-ending quest to elevate the standard of excellence, has resulted in break-
through audio designs.
Over the years, the Krell line of power amplifiers, including benchmark products
such as the KRS–100, KRS–200, and the Audio Standard models, has estab-
lished a legacy of unparalleled sonic performance—the Krell level of perform-
ance. The LAT Series, the first loudspeaker series introduced by Krell, brought
the Krell level of performance to loudspeakers worldwide. The Resolution Series of
loudspeakers continues this Krell tradition.
Dan D’Agostino remains committed to the development of new designs and
technologies. And the Krell legacy will continue to evolve with products that deliver
innovative engineering, perfection in build quality, and outstanding audio performance.
Krell Resolution 1, 2, 3, and C Loudspeakers
(SECTION ONE: About Krell continued)
(SECTION ONE: About Krell continued)
3
Technology
Krell HEAT, or High End Audio Theater, is a design application
incorporated into Krell components to enhance multi-channel
home entertainment systems. A Krell HEAT system is an inte-
grated home theater system consisting of a state-of-the-art
Krell preamp/processor and matching amplifiers and loud-
speakers that reproduce two-channel and multi-channel
sources with audiophile sound quality, placing listeners in the
middle of a lifelike environment.
A crossover is used to maximize the efficient delivery of all of
the sound reproduction tasks across the entire audible spec-
trum. The crossover splits the audible spectrum into separate
frequency bands for the distribution of content to different
drivers in a loudspeaker. A two-way crossover, for instance,
may split the audible spectrum into two frequency bands,
from 20 Hz to 2 kHz and from 2kHz to 20 kHz and above. The
loudspeaker woofer driver reproduces content from 20 Hz to
2 kHz, while the tweeter reproduces content from 2 kHz to
20 kHz and above.
Krell HEAT
Crossover
Definition of Terms
Following are the definitions of key terms used in your owner’s reference manual.
Krell Resolution 1, 2, 3, and C Loudspeakers
Krell Resolution 1, 2, 3, and C Loudspeakers continued
4
Unpacking and Placement
This section describes the procedures for safely unpacking and placing your
Resolution loudspeakers.
Opening a Resolution 1, 2, 3, or C Shipping Box
Resolution 1, four-way floor standing loudspeaker. Each Resolution 1 ship-
ping box measures 21 in. (53.3 cm) wide by 62 in. (157.5 cm) high by 24 in. (61
cm) deep and contains one Resolution 1 loudspeaker. The combined weight of
the box and loudspeaker is 215 lb. (97.7 kg). Each Resolution 1 loudspeaker
measures 13.2 in. (33.5 cm) wide by 58 in. (147.3 cm) high by 19.7 in. (50.0 cm)
deep and weighs 195 lb. (88.2 kg).
Resolution 2, 3-way floor standing loudspeaker. Each Resolution 2 shipping
box measures 19 in. (48.3 cm) wide by 52 in. (132.1 cm) high by 24 in. (61 cm)
deep and contains one Resolution 2 loudspeaker. The combined weight of the
box and loudspeaker is 160 lb. (72.7 kg). Each Resolution 2 loudspeaker meas-
ures 11.6 in. (29.5 cm) wide by 48 in. (121.9 cm) high by 19.7 in. (50.0 cm) deep
and weighs 140 lb. (63.3 kg).
Resolution 3, 2-way bookshelf loudspeaker. Each Resolution 3 shipping box
measures 19 in. (48.3 cm) wide by 22 in. (55.9 cm) high by 20 in. (50.8 cm) deep
and contains one Resolution 3 loudspeaker. The combined weight of the box
and loudspeaker is 55 lb. (25 kg). Each Resolution 3 loudspeaker measures 11.3
in. (28.7 cm) wide by 16.0 in. (40.6 cm) high by 16.7 in. (42.4 cm) deep with an
estimated weight of 45 lb. (20.4 kg).
Resolution C, 3-way center channel loudspeaker. Each Resolution C shipping
box measures 38.8 in. (98.6 cm) wide by 20.3 in. (51.4 cm) high by 20.3 in.
(51.4 cm) deep and contains one Resolution C loudspeaker. The combined
weight of the box and loudspeaker is 100 lb. (45.5 kg). Each Resolution C loud-
speaker measures 32 in. (81.3 cm) wide by 12.3 in. (31.2 cm) high by 16.7 in.
(42.4 cm) deep and weighs 90 lb. (40.7 kg).
Krell recommends that you have two people remove a floor standing loudspeaker
from its shipping box. Three to four people are needed to safely move a floor stand-
ing loudspeaker to its place in the listening area. For all models, attach the loud-
speaker grille after you place the loudspeaker in position in the listening area.
SECTIONTWO
continued
5
To Remove the Resolution Loudspeaker from the Shipping Box
The shipping box is designed to open safely and easily. Inside the box, the
Resolution loudspeaker is enclosed in a protective sleeve, and is further protected
by foam pads. The only tool you need is a box cutter, to remove the loudspeaker
from the shipping box.
Note
Save all packing materials. If you need to ship a Resolution Series loudspeaker in the future,
repack the unit in its original packaging to prevent shipping damage.
Follow the steps below to unpack any loudspeaker model:
1. Set the shipping box right side up using the arrows on the box as a guide.
two people needed
2. Use a box-cutting knife and slit the tape all along the top seams
of the outer carton.
3. Open the flaps to reveal the inner carton.
4. Slit the tape along the top seams of the inner carton and open the flaps.
If you are unpacking a Resolution 3, skip to Step 6.
If you are unpacking a Resolution C, skip to page 7:
5. Remove the foam pad containing two cardboard boxes, marked “accessories”
and “grille”, and set aside.
Continue the unpacking process for the Resolution 1, 2, or 3.
6. The loudspeaker is lying on its side. The top and bottom of the loudspeaker
are inset into foam pads. These cannot be removed while the loudspeaker is in
the box. Remove the moveable foam pads protecting the sides of the loudspeak-
er.
7. Locate the foam pad labeled TOP: this pad protects the top of the loudspeaker.
Carefully lift the loudspeaker carton to a standing position, upside down.
Orientation: the foam pad on the floor is labeled TOP. Make certain that the
loudspeaker stays inside the carton as you bring it to the vertical position.
two people needed
8. Kneel down and grasp the foam pad labeled TOP.
Krell Resolution 1, 2, 3, and C Loudspeakers
(SECTION TWO: Unpacking and Placement continued)
continued
6
9. Carefully slide the loudspeaker out and away from the inner and outer cartons.
The loudspeaker is still upside down, and the foam pads marked TOP and
BOTTOM are still on the loudspeaker.
two people needed
10. Set the inner and outer cartons aside.
11. Locate the foam pad labeled BOTTOM: this pad protects the bottom of the
loudspeaker.
12. Remove the foam pad labeled BOTTOM.
13. Open the band that secures the protective sleeve around the loudspeaker.
14. Gently slide the sleeve down, toward the foam pad labeled TOP.
If you are installing feet on the Resolution 1 or Resolution 2 loudspeaker, skip to
Step 17.
15. Carefully invert the loudspeaker so that the bottom of the loudspeaker cabinet
is on the floor.
16. Remove the foam pad labeled TOP, and remove the protective sleeve.
2 people needed
You are ready to position the Resolution 3 in the listening area. See Placement, on
page 8.
To install feet on the Resolution 1 or Resolution 2 loudspeakers:
17. Locate the spikes, rubber feet and locking washers, in the small cardboard
box marked “accessories”.
18. Choose the set of feet you want to use on your loudspeaker.
Each Resolution 1 and Resolution 2 loudspeaker is provided with two sets of
feet: four spikes and four rubber feet. The sharp, pointed spikes are ideal for
carpeted floors. The rubber feet protect tile and wood floors.
19. Thread the washers onto the feet.
Krell Resolution 1, 2, 3, and C Loudspeakers
(SECTION TWO: Unpacking and Placement continued)
Andere Handbücher für RESOLUTION 1
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung