KTM 1290 Super Adventure R EU 2018 Handbuch

SETUP INSTRUCTIONS 2018

1290 Super Adventure R

Art. no. 3213793en

INTRODUCTION

*3213793en*

3213793en

11/2017

INTRODUCTION

Perform the work described in these setup instructions before the vehicle is delivered to the customer.

Read the setup instructions in their entirety before beginning work.

These setup instructions were written to correspond to the latest state of this series. We reserve the right to make

changes in the interest of technical advancement without at the same time updating this manual.

We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop

are not specified here. It is assumed that the work will be performed by a fully trained mechanic.

All specifications are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right to modify or delete

technical specifications, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice

and without specifying reasons, to adapt these to local conditions, as well as to stop production of a particular

model without prior notice. KTM accepts no liability for delivery options, deviations from illustrations and descrip-

tions, misprints, and other errors. The models portrayed partly contain special equipment that does not belong to

the regular scope of supply.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission

of the copyright owner.

ISO 9001(12 100 6061)

According to the international quality management standard ISO 9001, KTM uses quality assur-

ance processes that lead to the maximum possible quality of the products.

Issued by: TÜV Management Service

KTM Sportmotorcycle GmbH

Stallhofnerstraße 3

5230 Mattighofen, Austria

This document is valid for the following models:

1290 Super Adventure R EU (F9903R6)

1290 Super Adventure R TKC EU (F9903R7)

1290 Super Adventure R TKC JP (F9986R7)

1290 Super Adventure R TKC US (F9975R6)

1290 Super Adventure R TKC CN (F9987R6)

1 MEANS OF REPRESENTATION

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

Indicates a voltage measurement.

Indicates a current measurement.

Indicates a resistance measurement.

Indicates the end of an activity including potential rework.

1.2 Formats used

The typographical formats used in this document are explained below.

Proprietary name Indicates a proprietary name.

Name®Indicates a protected name.

Brand™ Indicates a brand available on the open market.

Underlined terms Refer to technical details of the vehicle or indicate technical terms, which

are explained in the glossary.

SETUP 2

2.1 Unpacking and setting up the vehicle

F01344-10

–Remove the straps and box.

F01003-01

–Remove the adhesive tape in the upper area of the motorcycle.

F01004-01

–Roll down the film at the sides.

Info

To avoid damaging the motorcycle during unpacking,

leave the other films on the vehicle until you have fin-

ished work on the vehicle.

–Remove the separate enclosure and unpack it. Check the sepa-

rate enclosure for completeness.

–Check the vehicle for transport damage.

F01005-01

–Remove the controls from the transport holder.

–Remove the screws and handlebar clamps.

–Remove the transport holder.

F00995-01

–Remove the right hand guard.

–Position the controls on the right half of the handlebar.

Tighten the screws.

Guideline

Remaining screws,

chassis

M5 5 Nm (3.7 lbf ft)

Remaining chassis

screws

M6 10 Nm (7.4 lbf ft)

–Mount the right hand guard.

2 SETUP

F00996-10

Warning

Danger of accidents A repaired handlebar poses a

safety risk.

If the handlebar is bent or straightened, the mate-

rial becomes fatigued. The handlebar may break as a

result.

–Change the handlebar if the handlebar is damaged

or bent.

–Position the handlebar.

Info

Make sure the cables and wiring are positioned cor-

rectly.

–Position the handlebar clamps. Tighten the screws evenly.

Guideline

Screw, handlebar

clamp

M8 20 Nm (14.8 lbf ft)

Markings Aface backwards.

Handlebar scale markings Bare located centrally

between the handlebar clamps.

–Check the throttle grip for smooth operation.

F01345-01

–Mount and tighten the rear mirror on both sides.

SETUP 2

F01010-10

–Mount reflector 1with spring washers 2on holding

plate 3.

–Mount the holding plate on the license plate bracket.

(all EU/JP/CN models)

–Mount the license plate holder.

(US)

–Bond the reflectors on the right and left side of the reflec-

tor holder.

–Mount the reflector holder on license plate bracket.

–Carefully loosen and remove the tension belt over the

swingarm.

Guideline

An assistant prevents the motorcycle from falling over.

–Carefully loosen and remove the tension belts around the lower

triple clamp.

The vehicle is released at the front.

–Together with an assistant, take the vehicle off the palette.

F00999-10

–Remove radiator shield 4.

–Remove screws 5.

–Position radiator guard.

Info

Pay attention to the guides and the holding lugs.

–Mount and tighten screws 5.

Guideline

Screw, cooler retain-

ing bracket

M6 7 Nm (5.2 lbf ft)

–Mount and tighten screws 6.

Guideline

Screw, cooler retain-

ing bracket

M6 7 Nm (5.2 lbf ft)

F00998-10

–Mount rubber dampers 7on the engine guard.

–Position engine guard. Mount and tighten the screws with the

distance sleeves.

Guideline

Screw, engine guard M6 10 Nm (7.4 lbf ft)

2 SETUP

S01883-10

–Mount the frame protector elements 8on both sides.

–Position the left crash bar with frame protector and attach the

clamp to the frame tube.

Info

Cover the components to protect them against damage.

–Mount screw 9but do not tighten yet.

Guideline

Remaining chassis

screws

M10 45 Nm (33.2 lbf ft)

–Mount screws bk but do not tighten yet.

Guideline

Remaining chassis

screws

M6 10 Nm (7.4 lbf ft)

–Mount screw bl but do not tighten yet.

Guideline

Remaining chassis

screws

M6 10 Nm (7.4 lbf ft)

S01884-10

–Position the right crash bar with frame protector and attach

the clamp to the frame tube.

Info

Cover the components to protect them against damage.

–Mount screw bm but do not tighten yet.

Guideline

Remaining chassis

screws

M10 45 Nm (33.2 lbf ft)

–Mount screws bn but do not tighten yet.

Guideline

Remaining chassis

screws

M6 10 Nm (7.4 lbf ft)

–Mount screw bo but do not tighten yet.

Guideline

Remaining chassis

screws

M6 10 Nm (7.4 lbf ft)

F01002-10

–Mount and tighten fittings bp.

Guideline

Remaining chassis

screws

M6 10 Nm (7.4 lbf ft)

The crash bars are equally aligned with each other.

–Tighten all the screws of the crash bar.

SETUP 2

Guideline

Remaining chassis

screws

M6 10 Nm (7.4 lbf ft)

Remaining chassis

screws

M10 45 Nm (33.2 lbf ft)

F01009-01

–Position footrest rubber bq.

–Mount locking plate br and nut bs.

–Tighten nut bs.

–Repeat these steps on the opposite side.

F01006-10

Condition

Function KTM MY RIDE (optional) activated.

–Remove screws bt.

–Take off the headlight mask.

F01007-10

–Remove screws ck with the sleeves.

Tip

Adjust the tilt of the combination instrument

accordingly.

2 SETUP

F01008-10

–Unplug connector cl.

H02004-10

–Apply radio certification sticker to the rear of the combina-

tion instrument in area C.

Info

If the function KTM MY RIDE is enabled, the sticker

must be applied.

If the function KTM MY RIDE is not enabled or has

been disabled, the sticker must not be applied.

–Plug in connector cl.

–Mount and tighten screws ck with the sleeves.

Guideline

Screw, combination

instrument

M5 4.5 Nm

(3.32 lbf ft)

Tip

Adjust the tilt of the combination instrument

accordingly.

–Position the headlight mask.

–Mount and tighten screws bt.

Guideline

Screw, cover part M5x12 3.5 Nm

(2.58 lbf ft)

–Install the wind shield. ( p. 9)

–Remove the Race-on key from the storage compartment and

keep in a safe place for the handover.

–Remove the seat. ( p. 9)

–Remove the black ignition key and the KEYCODECARD from

under the seat and keep in a safe place for the handover.

–Recharge the battery. ( p. 9)

–Remove the remaining films.

–Check the headlight setting. ( p. 14)

–Refuel. ( p. 17)

–Prepare the vehicle according to the specifications in the

KTM Dealer.net for handover to the customer.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KTM Motorrad Handbücher

KTM

KTM 450 Rally Factory Replica Bedienungsanleitung

KTM

KTM 250 XC-F, XCF-W, EXC-F, 400 XC-W, EXC RACING, 450 XC, XC-W, EXC RACING, 525 XC, XC-W, EXC RACING, 525 XC DESERT... Bedienungsanleitung

KTM

KTM Freeride 250 F 2019 Handbuch

KTM

KTM 990 Super Duke 2008 Bedienungsanleitung

KTM

KTM 1190 RC8 EU 2008 Handbuch

KTM

KTM 1998 50 SXR Adventure Benutzerhandbuch

KTM

KTM 300 EXC ERZBERGRODEO 2023 Bedienungsanleitung

KTM

KTM 390 DUKE 2022 Bedienungsanleitung

KTM

KTM 2014 1190 Adventure Bedienungsanleitung

KTM

KTM 1290 Super Duke R 2016 Handbuch

KTM

KTM 125 EXC 2015 Handbuch

KTM

KTM 350 XC-F Bedienungsanleitung

KTM

KTM 790 Adventure R 2019 Betriebsanleitung

KTM

KTM 125 EXC EU 2014 Handbuch

KTM

KTM 250 EXC EU Betriebsanleitung

KTM

KTM 950 ADVENTURE 2003 Bedienungsanleitung

KTM

KTM 1290 SUPER DUKE GT 2023 Bedienungsanleitung

KTM

KTM 85 SX 2017 Handbuch

KTM

KTM 250 SX-F EU 2011 Bedienungsanleitung

KTM

KTM 350 EXC-F SIX DAYS EU Bedienungsanleitung

KTM

KTM 85 SX 2005 Bedienungsanleitung

KTM

KTM 450 EXC SIX DAYS Handbuch

KTM

KTM 50 SX 2017 Bedienungsanleitung

KTM

KTM 1190 RC8 R EU/UK 2009 Bedienungsanleitung

Beliebte Motorrad Handbücher anderer Marken

OHVALE

OHVALE GP-0 Stücklistenhandbuch

Yamaha

Yamaha Star XV19CTSZ 2009 Bedienungsanleitung

HYOSUNG

HYOSUNG ST7 Bedienungsanleitung

Husqvarna

Husqvarna FC 250 2016 Bedienungsanleitung

Ducati

Ducati SCRAMBLER 800 Gebrauchsanweisung

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung

Yamaha

Yamaha 2006 YZF-R1V Bedienungsanleitung

Fantic

Fantic Enduro 125 Bedienungsanleitung

Ducati

Ducati Supersport 750 desmodue Bedienungsanleitung

MV Agusta

MV Agusta 2008 F4 312RR 1078 Gebrauchsanweisung

Yamaha

Yamaha XVS650A Bedienungsanleitung

Yamaha

Yamaha YZF-R6T(C) Handbuch

Ducati

Ducati 748 monoposto strada Bedienungsanleitung

ATK

ATK 1988 250 Bedienungsanleitung

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Bedienungsanleitung

Triumph

Triumph Thunderbird Bedienungsanleitung

Yamaha

Yamaha 2006 FJR1300A Bedienungsanleitung

Ducati

Ducati 996 Bedienungsanleitung