KTM 1290 Super Duke R 2019 Handbuch

SETUP INSTRUCTIONS 2019

1290 Super Duke R

Art. no. 3213974en

INTRODUCTION

*3213974en*

3213974en

07/2018

INTRODUCTION

Perform the work described in these setup instructions before the vehicle is delivered to the customer.

Read the setup instructions in their entirety before beginning work.

These setup instructions were written to correspond to the latest state of this series. We reserve the right to make

changes in the interest of technical advancement without at the same time updating this manual.

We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop

are not specified here. It is assumed that the work will be performed by a fully trained mechanic.

All specifications are non-binding. KTM Sportmotorcycle GmbH specifically reserves the right to modify or delete

technical specifications, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice

and without specifying reasons, to adapt these to local conditions, as well as to stop production of a particular

model without prior notice. KTM accepts no liability for delivery options, deviations from figures and descriptions,

misprints, and other errors. The models portrayed partly contain special equipment that does not belong to the

regular scope of supply.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission

of the copyright owner.

ISO 9001(12 100 6061)

KTM applies quality assurance processes that lead to the highest possible product quality as

defined in the ISO 9001 international quality management standard.

Issued by: TÜV Management Service

KTM Sportmotorcycle GmbH

Stallhofnerstraße 3

5230 Mattighofen, Austria

INTRODUCTION

This document is valid for the following models:

1290 Super Duke R EU (F9903S9, F9903S2)

1290 Super Duke R JP (F9986S2)

1290 Super Duke R US (F9975S9, F9975S2)

MEANS OF REPRESENTATION 1

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

Indicates a voltage measurement.

1 MEANS OF REPRESENTATION

Indicates a current measurement.

Indicates a resistance measurement.

Indicates the end of an activity including potential rework.

1.2 Formats used

The typographical formats used in this document are explained below.

Proprietary name Indicates a proprietary name.

Name®Indicates a protected name.

Brand™ Indicates a brand available on the open market.

Underlined terms Refer to technical details of the vehicle or indicate technical terms, which

are explained in the glossary.

SETUP 2

2.1 Transport mode

H02713-01

This vehicle was blocked for transport in the software.

To operate the vehicle, the vehicle electronics must be enabled.

This process is conducted during initial setup in KTM Dealer.net.

Enabling ensures that the initial setup in KTM Dealer.net is docu-

mented.

Enabling can be performed either temporarily, e.g. for a test ride,

or permanently for vehicle handover.

Info

Make sure that the vehicle is permanently enabled before

handing it over to the customer.

2.2 Unpacking and setting up the vehicle

Preliminary work

–Remove the box.

2 SETUP

S01841-10

Main work

–Remove the adhesive tape in the upper area of the motorcycle.

S01842-10

–Roll down the film at the sides.

Info

To avoid damaging the motorcycle during unpacking,

leave the other films on the vehicle until you have fin-

ished work on the vehicle.

–Remove the separate enclosure and unpack it. Check that the

scope of supply is complete using the enclosed packing list.

Info

The procedure in the event of missing parts is

described in the customer service manual.

–Check the vehicle for transport damage.

SETUP 2

Info

The procedure in the event of transport damage is

described in the customer service manual.

S01843-10

–Remove cable tie(s) 1.

–Remove screws 2and 3.

–Take off the controls from the transport holder.

S01844-10

–Disconnect connector 4.

–Remove screw 5.

–Take off the combination instrument rack from the transport

holder.

2 SETUP

S01845-10

–Remove the handlebar clamp screws 6.

–Take off the handlebar clamp and transport holder.

–Remove packaging on the right turn signal.

S01846-10

–Position the handlebar.

The markings of the handlebar scale are located centrally

between the handlebar clamp.

–Position the handlebar clamp. Mount and tighten the screws

evenly.

Guideline

Screw, handlebar

clamp

M8 20 Nm (14.8 lbf ft)

Inhaltsverzeichnis

Andere KTM Motorrad Handbücher

KTM

KTM 300 SX Benutzerhandbuch

KTM

KTM 50 SX 2017 Bedienungsanleitung

KTM

KTM 125 EXC 2016 Bedienungsanleitung

KTM

KTM 390 ADVENTURE 2021 Bedienungsanleitung

KTM

KTM 250 SX 2022 Bedienungsanleitung

KTM

KTM 400 EXC EU 2009 Handbuch

KTM

KTM SX-E 5 Handbuch

KTM

KTM 450 Rally Factory Replica 2014 Bedienungsanleitung

KTM

KTM 390 Duke EU Bedienungsanleitung

KTM

KTM 390 Duke Series 2019 Bedienungsanleitung

KTM

KTM 1290 Super Adventure T 2017 Handbuch

KTM

KTM 1290 Super Adventure Bedienungsanleitung

KTM

KTM 85 SX Bedienungsanleitung

KTM

KTM 250 EXC-F Six Days 2021 Handbuch

KTM

KTM 250 EXC-F EU Bedienungsanleitung

KTM

KTM 250 XC-F 2021 Handbuch

KTM

KTM 250 DUKE Bedienungsanleitung

KTM

KTM 65 XC 2009 Bedienungsanleitung

KTM

KTM 400 EXC RACING Bedienungsanleitung

KTM

KTM 1090 Adventure R 2018 Handbuch

KTM

KTM 390 Duke AUS 2013 Bedienungsanleitung

KTM

KTM 690 Duke EU 2015 Handbuch

KTM

KTM 1190 RC8 R EU/UK 2009 Betriebsanleitung

KTM

KTM 1998 50 SXR Adventure Benutzerhandbuch

Beliebte Motorrad Handbücher anderer Marken

OHVALE

OHVALE GP-0 Stücklistenhandbuch

Yamaha

Yamaha Star XV19CTSZ 2009 Bedienungsanleitung

HYOSUNG

HYOSUNG ST7 Bedienungsanleitung

Husqvarna

Husqvarna FC 250 2016 Bedienungsanleitung

Ducati

Ducati SCRAMBLER 800 Gebrauchsanweisung

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung

Yamaha

Yamaha 2006 YZF-R1V Bedienungsanleitung

Fantic

Fantic Enduro 125 Bedienungsanleitung

Ducati

Ducati Supersport 750 desmodue Bedienungsanleitung

MV Agusta

MV Agusta 2008 F4 312RR 1078 Gebrauchsanweisung

Yamaha

Yamaha XVS650A Bedienungsanleitung

Yamaha

Yamaha YZF-R6T(C) Handbuch

Ducati

Ducati 748 monoposto strada Bedienungsanleitung

ATK

ATK 1988 250 Bedienungsanleitung

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Bedienungsanleitung

Triumph

Triumph Thunderbird Bedienungsanleitung

Yamaha

Yamaha 2006 FJR1300A Bedienungsanleitung

Ducati

Ducati 996 Bedienungsanleitung