KTM 250 EXC-F EU 2011 Handbuch

SETUP INSTRUCTIONS 2011

250 EXC-F EU

250 EXC-F AUS

250 EXC-F SIX DAYS EU

250 XCF‑W SIX DAYS USA

Art. no. 3211687en

INTRODUCTION 1

INTRODUCTION

The work described in these setup instructions must be performed before the vehicle is delivered to the customer.

Read the setup instructions in their entirety before beginning work.

Print out the current PDI form found on the KTM DEALER.NET.

These setup instructions were written to correspond to the latest state of this series. We reserve the right to make changes in the inter-

est of technical advancement without at the same time updating this manual.

We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop are not specified here.

It is assumed that the work will be performed by a fully trained mechanic.

All specifications are non-binding. KTM Sportmotorcycle AG in particular reserves the right to modify or delete technical specifica-

tions, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt

these to local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery

options, deviations from illustrations and descriptions, as well as misprints and other errors. The models portrayed partly contain spe-

cial equipment that does not belong to the regular scope of delivery.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission of the copyright

owner.

ISO 9001(12 100 6061)

According to the international quality management standard ISO 9001, KTM uses quality assurance processes that lead

to the maximum possible quality of the products.

Issued by: TÜV Management Service

KTM-Sportmotorcycle AG

5230 Mattighofen, Austria

MEANS OF REPRESENTATION 2

Symbols used

The symbols used are explained in the following.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

Identifies a page reference (more information is provided on the specified page).

Denotes additional information or tips.

Denotes the result of a test step.

Denotes a voltage measurement.

Denotes a current measurement.

Denotes a resistance measurement.

Formats used

The typographical and other formats used are explained in the following.

Own name Indicates a proprietary name.

Name®Identifies a protected name.

Brand™ Identifies a brand in merchandise traffic.

SET‑UP 3

2.1Unpacking and setting up the vehicle

600809-10

Packaging 2

–Remove the box and the plastic packaging.

Info

To avoid damaging the motorcycle during the setup, leave the protective

film on the vehicle until you have finished.

–Remove the separate enclosure and unpack it. Check that the scope of delivery

is complete on the basis of the enclosed packing list.

–Have a lift stand available.

Lift stand (54829055000)

–Carefully loosen and remove the tensioning belt over the link fork.

Info

An assistant prevents the motorcycle from falling over.

–Carefully loosen and remove the tensioning belts around the lower triple clamp.

The vehicle is released at the front.

–Together with an assistant, take the vehicle off of the palette.

–Position the vehicle on a lift stand.

–Check the vehicle for transport damage.

600811-10

Package 12

–Remove the box and the plastic packaging.

Info

An assistant prevents the motorcycle from falling over.

To avoid damaging the motorcycle during the setup, leave the protective

film on the vehicle until you have finished.

–Remove the separate enclosure and unpack it. Check that the scope of delivery

is complete on the basis of the enclosed packing list.

–Have a lift stand available.

Lift stand (54829055000)

600812-10

–Together with an assistant, take the vehicle off of the palette.

–Position the vehicle on a lift stand.

–Check the vehicle for transport damage.

600813-10

–Install the shock absorber. ( p. 8)

SET‑UP 4

600814-10

–Position the fork legs and tighten the screws of the triple clamp.

Guideline

Screw, top triple clamp

(EXC‑F EU/AUS)

M8 20 Nm

(14.8 lbf ft)

Screw, top triple clamp

(EXC‑F SIX DAYS, XCF‑W SIX DAYS)

M8 17 Nm

(12.5 lbf ft)

Screw, bottom triple clamp

(EXC‑F EU/AUS)

M8 15 Nm

(11.1 lbf ft)

Screw, bottom triple clamp

(EXC‑F SIX DAYS, XCF‑W SIX DAYS)

M8 12 Nm

(8.9 lbf ft)

Info

The upper milled groove in the fork leg must be flush with the top edge

of the upper triple clamp.

Position bleeder screws toward the front.

101036-10

–Mount the handlebar.

The scale on the handlebar should be at the center of the handlebar clamp.

–Position the handlebar clamps. Fit and evenly tighten the four screws.

Guideline

Screw, handlebar clamp M8 20 Nm

(14.8 lbf ft)

600816-10

–Position the controls on the right half of the handlebar.

Info

The routing of the cables can be seen in the figure.

600817-10

–Position the controls on the left half of the handlebar.

Info

The figure shows how to route the clutch line and wiring harness.

–Install the front fender. ( p. 8)

SET‑UP 5

600819-10

(XCF‑W SIX DAYS)

–Attach the speedometer to the upper triple clamp.

Guideline

Remaining screws, chassis M6 10 Nm

(7.4 lbf ft)

–Connect the connector.

600818-10

(EXC-F, EXC‑F SIX DAYS)

–Attach the retaining bracket for the connector, the turn signal bracket with the

turn signal and the speedometer to the upper triple clamp.

Guideline

Remaining screws, chassis M6 10 Nm

(7.4 lbf ft)

–Connect the connector.

–Correctly mount the fuel tank breather.

–Refit the headlight mask with the headlight. ( p. 8)

–Install the front wheel. ( p. 7)

101019-01

–Mount the footrests with the springs and bolts. Secure the bolts using the washers

and pins.

Plier for footrest spring (58429083000)

800035-10

Warning

Risk of injury Battery acid and battery gases cause serious cauterization.

–Keep batteries out of the reach of children.

–Wear suitable protective clothing and goggles.

–Avoid contact with battery acid and battery gases.

–Keep the battery away from sparks or open fire. Charge only in well ven-

tilated rooms.

–Flush with copious amounts of water in case of skin contact. If battery

acid comes into contact with the eyes, flush the eyes with water for at

least 15 minutes and consult a physician.

–Fill the battery.

Info

Read the notes in the battery package.

–Recharge the battery. ( p. 9)

–Install the battery. ( p. 10)

101037-01

(EXC-F, EXC‑F SIX DAYS)

–Mount the mirror clamps on both sides.

SET‑UP 6

600810-10

–Mount and tighten the rear mirror adapter and rear mirror on both sides.

–Mount the reflector.

–Unpack and mount the KTM PowerParts included in the delivery (optional).

Info

Read the accompanying KTM PowerParts installation instructions.

–Apply the label included in the delivery (optional).

–Position all controls exactly on the handlebar. Tighten all screws.

–Refuel. ( p. 10)

–Print out the current PDI form found on KTM DEALER.NET and perform the delivery

inspection.

WORK 7

3.1Removing the seat

500080-10

–Remove screw .

–Lift up the seat at the rear, pull it back and then remove it from above.

3.2Mounting the seat

600674-01

–Hook in the front of the seat at the collar sleeve of the fuel tank, lower it at the rear

and simultaneously push it forward.

–Make sure that the seat is correctly locked in.

–Mount and tighten the screw of the seat fixing.

Guideline

Remaining screws, chassis M6 10 Nm (7.4 lbf ft)

3.3Installing the front wheel

Warning

Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.

–Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

500086-11

–Check the wheel bearing for damage and wear.

» If the wheel bearing is damaged or worn:

–Change the wheel bearing.

–Clean and grease shaft seal rings and bearing surface of the spacers.

Long-life grease ( p. 14)

–Insert the spacers.

500084-11

–Lift the front wheel into the fork, position it, and insert the wheel spindle.

–Mount and tighten screw .

Guideline

Screw, front wheel spindle M24x1.5 45 Nm

(33.2 lbf ft)

–Activate the hand brake lever multiple times until the brake linings are in contact

with the brake disc.

–Remove the motorcycle from the lift stand.

–Pull the front wheel brake and push down hard on the fork several times to align

the fork legs.

–Fully tighten screw .

Guideline

Screw, fork stub M8 15 Nm

(11.1 lbf ft)

WORK 8

3.4Installing the front fender

600692-10

–Ensure that the spacers are mounted in the fender.

–Position the front fender. Mount and tighten screws .

Guideline

Remaining screws, chassis M6 10 Nm (7.4 lbf ft)

Info

Make sure the holding lugs engage in the start number plate or headlight

mask.

3.5Refitting the headlight mask with the headlight

600702-11

–Connect the electric plug connector .

600703-11

–Position the headlight mask and fix it with the rubber band .

Info

Ensure that the retaining lugs engage in the fender.

–Position the brake line and wiring harness. Put the clamp on, mount and tighten

screw .

–Check the headlight adjustment.

3.6Installing the shock absorber

600668-11

–Push splash protector to the side and position the shock absorber. Mount and

tighten screw .

Guideline

Screw, top shock absorber M12 80 Nm

(59 lbf ft)

Loctite®2701

–Mount and tighten screw .

Guideline

Screw, bottom shock

absorber

M12 80 Nm

(59 lbf ft)

Loctite®2701

Info

The heim joint for the shock absorber at the swing arm is Teflon coated. It

must not be greased with grease or with other lubricants. Lubricants dis-

solve the Teflon coating, thereby drastically reducing the service life.

–Remove the motorcycle from the lift stand.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KTM Motorrad Handbücher

KTM

KTM 65 SX 1999 Bedienungsanleitung

KTM

KTM 250 XC-F 2018 Handbuch

KTM

KTM 1290 Super Duke R EU 2014 Betriebsanleitung

KTM

KTM 125 EXC EU 2014 Handbuch

KTM

KTM 690 Enduro R 2021 Bedienungsanleitung

KTM

KTM 690 Enduro EU 2010 Handbuch

KTM

KTM 690 Enduro USA 2008 Bedienungsanleitung

KTM

KTM 450 EXC EU Bedienungsanleitung

KTM

KTM 350 EXC-F 2019 Bedienungsanleitung

KTM

KTM 150 EXC TPI 2022 Bedienungsanleitung

KTM

KTM F5303U5 2021 Bedienungsanleitung

KTM

KTM 1290 Super Duke GT 2018 Bedienungsanleitung

KTM

KTM 990 SUPER DUKE Bedienungsanleitung

KTM

KTM 250 SX-F 2021 Bedienungsanleitung

KTM

KTM 250 SX F PRADO 2020 Handbuch

KTM

KTM Freeride 250 F 2018 Bedienungsanleitung

KTM

KTM 2015 450 SX-F EU Bedienungsanleitung

KTM

KTM 85 SX 19 Bedienungsanleitung

KTM

KTM 690 Duke AUS/UK 2014 Bedienungsanleitung

KTM

KTM 1998 125sx Bedienungsanleitung

KTM

KTM 350 EXC-F EU 2014 Handbuch

KTM

KTM 65 SX 2011 Handbuch

KTM

KTM 1290 Super Adventure Bedienungsanleitung

KTM

KTM 690 Enduro R EU 2012 Betriebsanleitung

Beliebte Motorrad Handbücher anderer Marken

OHVALE

OHVALE GP-0 Stücklistenhandbuch

Yamaha

Yamaha Star XV19CTSZ 2009 Bedienungsanleitung

HYOSUNG

HYOSUNG ST7 Bedienungsanleitung

Husqvarna

Husqvarna FC 250 2016 Bedienungsanleitung

Ducati

Ducati SCRAMBLER 800 Gebrauchsanweisung

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung

Yamaha

Yamaha 2006 YZF-R1V Bedienungsanleitung

Fantic

Fantic Enduro 125 Bedienungsanleitung

Ducati

Ducati Supersport 750 desmodue Bedienungsanleitung

MV Agusta

MV Agusta 2008 F4 312RR 1078 Gebrauchsanweisung

Yamaha

Yamaha XVS650A Bedienungsanleitung

Yamaha

Yamaha YZF-R6T(C) Handbuch

Ducati

Ducati 748 monoposto strada Bedienungsanleitung

ATK

ATK 1988 250 Bedienungsanleitung

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Bedienungsanleitung

Triumph

Triumph Thunderbird Bedienungsanleitung

Yamaha

Yamaha 2006 FJR1300A Bedienungsanleitung

Ducati

Ducati 996 Bedienungsanleitung