KTM 50 SX 2015 Handbuch

SETUP INSTRUCTIONS 2015

50 SX

50 SX Mini

Art. no. 3213189en

INTRODUCTION 1

INTRODUCTION

The work described in these setup instructions must be performed before the vehicle is delivered to the customer.

Read the setup instructions in their entirety before beginning work.

Print out the current PDI form found on the KTM DEALER.NET.

These setup instructions were written to correspond to the latest state of this series. We reserve the right to make changes in the inter-

est of technical advancement without at the same time updating this manual.

We shall not provide a description of general workshop methods. Likewise, safety rules that apply in a workshop are not specified here.

It is assumed that the work will be performed by a fully trained mechanic.

All specifications are non-binding. KTM Sportmotorcycle AG specifically reserves the right to modify or delete technical specifica-

tions, prices, colors, forms, materials, services, designs, equipment, etc., without prior notice and without specifying reasons, to adapt

these to local conditions, as well as to stop production of a particular model without prior notice. KTM accepts no liability for delivery

options, deviations from illustrations and descriptions, misprints, and other errors. The models portrayed partly contain special equip-

ment that does not belong to the regular scope of supply.

Reproduction, even in part, as well as copying of all kinds, is permitted only with the express written permission of the copyright

owner.

ISO 9001(12 100 6061)

According to the international quality management standard ISO 9001, KTM uses quality assurance processes that lead

to the maximum possible quality of the products.

Issued by: TÜV Management Service

KTM-Sportmotorcycle AG

5230 Mattighofen, Austria

1 MEANS OF REPRESENTATION 2

1.1 Symbols used

The meaning of specific symbols is described below.

Indicates an expected reaction (e.g. of a work step or a function).

Indicates an unexpected reaction (e.g. of a work step or a function).

Indicates a page reference (more information is provided on the specified page).

Indicates information with more details or tips.

Indicates the result of a testing step.

Denotes a voltage measurement.

Denotes a current measurement.

Denotes a resistance measurement.

1.2 Formats used

The typographical formats used in this document are explained below.

Proprietary name Identifies a proprietary name.

Name®Identifies a protected name.

Brand™ Identifies a trademark.

2 SETUP 3

2.1 Unpacking and setting up the vehicle

201948-10

–Open the box.

Info

To avoid damaging the vehicle while setting it up, do not remove the protec-

tive film on each component until installing the component, and leave it on

the vehicle until work has been completed.

–Remove the separate enclosure and unpack it. Check that the scope of supply is

complete on the basis of the enclosed packing list.

–Lift the vehicle out of the box with the assistance of another person.

–Raise the motorcycle with a lift stand. ( p. 4)

–Check the vehicle for transport damage.

–Remove the protective film from the handlebar.

201949-10

–Position the handlebar with handlebar clamps.

–Mount and tighten screws.

Guideline

Screw, handlebar clamp M8 20 Nm

(14.8 lbf ft)

–Check the handlebar position.

» If the handlebar position is not adjusted as required by the customer:

–Adjust the handlebar position. ( p. 4)

–Remove the screw of the brake line guide. Position the brake line. Mount the brake

line guide again and tighten the screw.

–Check the wiring harness, cables, and brake line for freedom of movement and cor-

rect routing.

–Check that the controls on the handlebar are correctly positioned and firmly seated.

201950-10

–Mount the footrests with the springs and pins. Secure the pins using the washers

and cotter pins.

Pliers for footrest spring (58429083000)

–Fill up with fuel. ( p. 5)

(50 SX Mini)

–Fill up with oil. ( p. 6)

–Remove the motorcycle from the lift stand. ( p. 4)

–Park the vehicle on the plug-in stand.

–Print out the current PDI form found on KTM DEALER.NET and perform the delivery

inspection.

3 WORK 4

3.1 Raising the motorcycle with a lift stand

Note

Danger of damage The parked vehicle may roll away or fall over.

–Always place the vehicle on a firm and even surface.

101933-01

–Raise the motorcycle at the frame underneath the engine.

Lift stand (59229055000)

The tires should no longer be in contact with the ground.

–Secure the motorcycle against falling over.

3.2 Removing the motorcycle from the lift stand

Note

Danger of damage The parked vehicle may roll away or fall over.

–Always place the vehicle on a firm and even surface.

101931-10

–Remove the motorcycle from the lift stand.

–Remove the lift stand.

–To park the motorcycle, insert plug-in stand into the plug-in stand bracket on

the left side of the vehicle.

Info

Remove the plug-in stand before riding.

3.3 Adjusting handlebar position

Warning

Danger of accidents Handlebar breakage.

–If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace handle-

bar.

400564-10

–Remove the screws . Take off the handlebar clamps. Remove the handlebar and

lay it to one side.

Info

Protect the motorcycle and its attachments from damage by covering them.

Do not bend the cables and lines.

–Remove the screws . Remove the handlebar support.

–Place the handlebar support in the required position. Fit and tighten the

screws .

Guideline

Screw, handlebar support M10 40 Nm

(29.5 lbf ft)

Loctite®243™

–Position the handlebar.

Info

Make sure cables and wiring are positioned correctly.

3 WORK 5

–Position the handlebar clamps. Fit and evenly tighten the screws .

Guideline

Screw, handlebar clamp M8 20 Nm

(14.8 lbf ft)

Info

Make sure the gap width is even.

3.4 Refueling

Danger

Fire hazard Fuel is highly flammable.

–Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no

fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.

–The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.

Warning

Danger of poisoning Fuel is poisonous and a health hazard.

–Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with

the eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with

soap and water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel.

Warning

Environmental hazard Improper handling of fuel is a danger to the environment.

–Do not allow fuel to get into the ground water, the ground, or the sewage system.

–Switch off the engine.

–Open the filler cap. ( p. 5)

400214-10

–Fill the fuel tank with fuel up to measurement .

Guideline

Measurement of 35 mm (1.38 in)

Fuel tank

capacity, approx.

(50 SX Mini)

2.0 l (2.1 qt.) Super unleaded (ROZ 95/RON 95/PON

91) ( p. 9)

Fuel tank

capacity, approx.

(50 SX)

2.3 l (2.4 qt.) Super unleaded (95 octane) mixed

with 2-stroke engine oil (1:60)

( p. 9)

–Close the filler cap. ( p. 6)

3.5 Opening filler cap

Danger

Fire hazard Fuel is highly flammable.

–Never refuel the vehicle near open flames or burning cigarettes, and always switch off the engine first. Be careful that no

fuel is spilt, especially on hot vehicle components. Clean up spilt fuel immediately.

–The fuel in the fuel tank expands when warm and may emerge if overfilled. Follow the instructions on refueling.

Warning

Danger of poisoning Fuel is poisonous and a health hazard.

–Fuel must not come into contact with the skin, eyes, or clothing. Do not breathe in the fuel vapors. If contact occurs with

the eyes, rinse with water immediately and contact a physician. Immediately clean contaminated areas on the skin with

soap and water. If fuel is swallowed, contact a physician immediately. Change clothing that is contaminated with fuel.

Store fuel properly in a suitable canister and keep away from children.

Warning

Environmental hazard Improper handling of fuel is a danger to the environment.

–Do not allow fuel to get into the ground water, the ground, or the sewage system.

3 WORK 6

601580-10

–Turn the tank cap counterclockwise and pull it up.

3.6 Closing filler cap

601580-11

–Put the tank cap on and turn it clockwise.

Info

Run the fuel tank breather hose without kinks.

3.7 Filling up with oil (50 SX Mini)

Warning

Engine failure If the vehicle is run without 2-stroke oil in the tank, the result is engine failure.

–The oil tank must always be filled up to the MIN mark.

–Switch off the engine.

–Open the oil tank cap. ( p. 6)

102031-10

–Fill the oil tank at least up to the MIN mark .

Guideline

MIN mark Sufficient for a single tank filling

Oil tank contents

ca.

0.2 l (0.2 qt.) Engine oil, 2-stroke ( p. 9)

–Close the oil tank cap. ( p. 7)

3.8 Opening oil tank cap (50 SX Mini)

601582-10

–Turn the oil tank cap counterclockwise and pull it up.

3 WORK 7

3.9 Closing oil tank cap (50 SX Mini)

601582-11

–Put the oil tank cap on and turn it clockwise.

Info

Run the oil tank breather hose without kinks.

4 TECHNICAL DATA - TIGHTENING TORQUES FOR CHASSIS 8

Spoke nipple M3.5 3 Nm (2.2 lbf ft) –

Screw, brake linings M5 8 Nm (5.9 lbf ft) –

Rear brake caliper screw M6 10 Nm (7.4 lbf ft) Loctite®243™

Remaining nuts, chassis M6 10 Nm (7.4 lbf ft) –

Remaining screws, chassis M6 10 Nm (7.4 lbf ft) –

Screw, ball joint of push rod on foot

brake cylinder

M6 10 Nm (7.4 lbf ft) –

Screw, chain sliding piece M6 3 Nm (2.2 lbf ft) –

Screw, fork stub M6 10 Nm (7.4 lbf ft) –

Screw, front brake disc M6 14 Nm (10.3 lbf ft) Loctite®243™

Screw, rear brake disc M6 14 Nm (10.3 lbf ft) Loctite®243™

Screw, throttle grip M6 4.5 Nm (3.32 lbf ft) –

Engine carrying screw M8 25 Nm (18.4 lbf ft) –

Nut, foot brake lever M8 22 Nm (16.2 lbf ft) –

Nut, rim lock M8 10 Nm (7.4 lbf ft) –

Remaining nuts, chassis M8 25 Nm (18.4 lbf ft) –

Remaining screws, chassis M8 25 Nm (18.4 lbf ft) –

Screw, bottom triple clamp M8 15 Nm (11.1 lbf ft) –

Screw, chain sliding piece M8 15 Nm (11.1 lbf ft) –

Screw, front brake caliper M8 20 Nm (14.8 lbf ft) Loctite®243™

Screw, handlebar clamp M8 20 Nm (14.8 lbf ft) –

Screw, rear sprocket M8 25 Nm (18.4 lbf ft) Loctite®243™

Screw, top triple clamp M8 20 Nm (14.8 lbf ft) –

Front wheel spindle screw M10 40 Nm (29.5 lbf ft) –

Nut, swingarm pivot M10 45 Nm (33.2 lbf ft) –

Remaining nuts, chassis M10 45 Nm (33.2 lbf ft) –

Remaining screws, chassis M10 45 Nm (33.2 lbf ft) –

Screw, bottom shock absorber M10 45 Nm (33.2 lbf ft) –

Screw, handlebar support M10 40 Nm (29.5 lbf ft) Loctite®243™

Screw, top shock absorber M10 45 Nm (33.2 lbf ft) –

Nut, rear wheel spindle M12x1 40 Nm (29.5 lbf ft) –

Nut, steering head M20x1.5 No play

≤10 Nm (≤7.4 lbf ft)

–

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KTM Motorrad Handbücher

KTM

KTM 125 DUKE 2022 Bedienungsanleitung

KTM

KTM 125 EXC 2015 Handbuch

KTM

KTM 640 Duke Leitfaden

KTM

KTM 85 SX 2017 Handbuch

KTM

KTM ADVENTURE R 640 Leitfaden

KTM

KTM 690 Enduro R 2018 Bedienungsanleitung

KTM

KTM 250 SX 2019 Bedienungsanleitung

KTM

KTM 250 XC TPI 2020 Handbuch

KTM

KTM 690 SMC R EU 2014 Handbuch

KTM

KTM 2014 690 SMC R EU Betriebsanleitung

KTM

KTM 390 Duke 2020 Handbuch

KTM

KTM 1290 Super Duke GT 2018 Handbuch

KTM

KTM 250 SX-F EU Handbuch

KTM

KTM 350 SX-F EU 2014 Handbuch

KTM

KTM 350 XC-F Bedienungsanleitung

KTM

KTM 400 EXC FACTORY EDITION EU Betriebsanleitung

KTM

KTM 2014 1290 Super Duke R FR Bedienungsanleitung

KTM

KTM 50 SX 2010 Betriebsanleitung

KTM

KTM 85 SX 19/16 2013 Handbuch

KTM

KTM 250 XC TPI 2022 Bedienungsanleitung

KTM

KTM 690 SMC R Bedienungsanleitung

KTM

KTM 990 Adventure Baja Bedienungsanleitung

KTM

KTM 125 EXC EU 2011 Handbuch

KTM

KTM 400 SX RACING 2000 Benutzerhandbuch

Beliebte Motorrad Handbücher anderer Marken

OHVALE

OHVALE GP-0 Stücklistenhandbuch

Yamaha

Yamaha Star XV19CTSZ 2009 Bedienungsanleitung

HYOSUNG

HYOSUNG ST7 Bedienungsanleitung

Husqvarna

Husqvarna FC 250 2016 Bedienungsanleitung

Ducati

Ducati SCRAMBLER 800 Gebrauchsanweisung

MOTO GUZZI

MOTO GUZZI QUOTA 1100 ES Bedienungsanleitung

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung

Yamaha

Yamaha 2006 YZF-R1V Bedienungsanleitung

Fantic

Fantic Enduro 125 Bedienungsanleitung

Ducati

Ducati Supersport 750 desmodue Bedienungsanleitung

MV Agusta

MV Agusta 2008 F4 312RR 1078 Gebrauchsanweisung

Yamaha

Yamaha XVS650A Bedienungsanleitung

Yamaha

Yamaha YZF-R6T(C) Handbuch

Ducati

Ducati 748 monoposto strada Bedienungsanleitung

ATK

ATK 1988 250 Bedienungsanleitung

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Bedienungsanleitung

Triumph

Triumph Thunderbird Bedienungsanleitung

Yamaha

Yamaha 2006 FJR1300A Bedienungsanleitung