Kubota RT120Q Bedienungsanleitung

RT120Q

Operator’s

Manual

Issue 2.0

Original Instruction 053-2634

RT120Q Operator’s Manual Overview - 1

Overview

Chapter Contents

Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Equipment Modification . . . . . . . . . . . . . . . . . . . . . . 3

Unit Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Operator Orientation. . . . . . . . . . . . . . . . . . . . . . . . . 5

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 5

• Bulleted Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

• Numbered Lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Overview - 2 RT120Q Operator’s Manual

Serial Number Location

Record serial numbers and date of purchase in spaces provided. RT120Q (1) and engine serial numbers

(2) are located as shown.

Date of manufacture

Date of purchase

RT120Q serial number

Front attachment serial number

Rear attachment serial number

Trailer serial number

Engine serial number

t37om002w.eps

RT120Q Operator’s Manual Overview - 3

Intended Use

The RT120Q is a riding trencher designed to install buried service lines of various sizes using a variety of

Ditch Witch®attachments.

This unit is designed for operation in temperatures typically experienced in earth moving and construction

work environments. Contact your Ditch Witch dealer for provisions required for operating in extreme

temperatures. Use in any other way is considered contrary to the intended use.

The RT120Q should be used with genuine Ditch Witch chain, teeth, and sprockets. It should be operated,

serviced, and repaired only by persons familiar with their particular characteristics and acquainted with the

relevant safety procedures.

Equipment Modification

This equipment was designed and built in accordance with applicable standards and regulations.

Modification of equipment could mean that it will no longer meet regulations and may not function properly

or in accordance with the operating instructions. Modification of equipment should only be made by

competent personnel possessing knowledge of applicable standards, regulations, equipment design

functionality/requirements and any required specialized testing.

Attachment Max. width/diameter Max. depth

H910 trencher 24” (610 mm) 96” (2.4 m)

H911 trencher 24” (610 mm) 92” (2.3 m)

H1032 plow 3” (80 mm) 42” (1.07 m)

H1052 combo n/a 70” (1.78 m)

H1140 saw 103” (2.62 m) 40.5” (1.03 m)

RC120 reel carrier 84” (2.13 m) reel dia n/a

A920 backhoe 24” (610 mm) 105” (2.7 m)

NOTICE: The protection offered by the Rollover Protective System (ROPS) will be impaired if it has

been subjected to any modification, structural damage, or has been involved in an overturn accident.

The ROPS must be replaced after a roll-over.

Overview - 4 RT120Q Operator’s Manual

Unit Components

1. Rollover Protective Structure (ROPS)

2. Operator station

3. Control console

4. Engine compartment

5. Backfill blade (optional)

23 4

t37om003w.eps

RT120Q Operator’s Manual Overview - 5

Operator Orientation

Right and left sides of machine are determined by

facing front of unit while seated at the controls.

About This Manual

This manual contains information for the proper use of this machine. See Operation Overview for basic

operating procedures. Cross references such as “See page 50” will direct you to detailed procedures.

Bulleted Lists

Bulleted lists provide helpful or important information or contain procedures that do not have to be

performed in a specific order.

Numbered Lists

Numbered lists contain illustration callouts or list steps that must be performed in order.

1. Front of unit

2. Right of unit

3. Rear of unit

4. Left of unit

t37om004w.eps

Overview - 6 RT120Q Operator’s Manual

About This Manual

RT120Q Operator’s Manual Foreword - 7

Foreword

This manual is an important part of your equipment. It provides safety information and operation

instructions to help you use and maintain your Ditch Witch®equipment.

Read this manual before using your equipment. Keep it with the equipment at all times for future reference.

If you sell your equipment, be sure to give this manual to the new owner.

If you need a replacement copy, contact your Ditch Witch dealer. If you need assistance in locating a

dealer, visit our website at www.ditchwitch.com or write to the following address:

The Charles Machine Works, Inc.

Attn: Marketing Department

PO Box 66

Perry, OK 73077-0066

USA

The descriptions and specifications in this manual are subject to change without notice. The Charles

Machine Works, Inc. reserves the right to improve equipment. Some product improvements may have

taken place after this manual was published. For the latest information on Ditch Witch equipment, see your

Ditch Witch dealer.

Thank you for buying and using Ditch Witch equipment.

Foreword - 8 RT120Q Operator’s Manual

RT120 T4i

Operator’s Manual

Issue number 2.0/OM-06/17

Part number 053-2634

by The Charles Machine Works, Inc.

and Ditch Witch are registered trademarks of The Charles Machine Works, Inc.

This product and its use may be covered by one or more patents at http://patents.charlesmachine.works.

RT120Q Operator’s Manual Contents - 9

Contents

Overview

machine serial number, information about the type of work this machine is designed

to perform, basic machine components, and how to use this manual

Foreword

part number, revision level, and publication date of this manual, and factory contact

information

Safety

machine safety alerts and emergency procedures 9

Controls

machine controls, gauges, and indicators and how to use them 29

Operation Overview

an overview for completing a job with this machine: planning, setting up, installing

product, and restoring the jobsite; with cross references to detailed procedures

Prepare

procedures for inspecting and classifying the jobsite, planning the installation path,

and preparing the jobsite for work

Drive

procedures for startup, cold start, driving, and shutdown 83

Transport

procedures for lifting, hauling, and towing 89

Trench

procedures for trenching 101

Plow

procedures for plowing 107

Reel Carrier

procedures for using reel carrier 115

Backhoe

procedures for digging with backhoe 119

Inhaltsverzeichnis

Andere Kubota Traktor Handbücher

Kubota

Kubota BX231D Bedienungsanleitung

Kubota

Kubota BX2360 Bedienungsanleitung

Kubota

Kubota M108S Gebrauchsanweisung

Kubota

Kubota B2650 Bedienungsanleitung

Kubota

Kubota L3301 Bedienungsanleitung

Kubota

Kubota WSM STV32 Gebrauchsanweisung

Kubota

Kubota BX1870 Gebrauchsanweisung

Kubota

Kubota BX1800 Gebrauchsanweisung

Kubota

Kubota WSM STa-30 Gebrauchsanweisung

Kubota

Kubota L3130 Gebrauchsanweisung

Kubota

Kubota LA525 Bedienungsanleitung

Kubota

Kubota B2920 Bedienungsanleitung

Kubota

Kubota BX1880 Bedienungsanleitung

Kubota

Kubota WSM L2501 Gebrauchsanweisung

Kubota

Kubota B1620 Bedienungsanleitung

Kubota

Kubota M105S Gebrauchsanweisung

Kubota

Kubota M6040 Bedienungsanleitung

Kubota

Kubota MX5100 Gebrauchsanweisung

Kubota

Kubota BX23S Bedienungsanleitung

Kubota

Kubota M108DC Bedienungsanleitung

Kubota

Kubota M6040 Bedienungsanleitung

Kubota

Kubota L3200 Bedienungsanleitung

Kubota

Kubota GR1600EC2 Gebrauchsanweisung

Kubota

Kubota WSM BX1860 Gebrauchsanweisung

Beliebte Traktor Handbücher anderer Marken

Ariens

Ariens 936051 Bedienungsanleitung

MacDon

MacDon M150 Bedienungsanleitung

Belarus

Belarus 3522.5 Bedienungsanleitung

CARRARO

CARRARO Vigneto Bedienungsanleitung

Cub Cadet

Cub Cadet 3208 Bedienungsanleitung

GREMO

GREMO 1250F Gebrauchsanweisung

HATTAT

HATTAT A90 Bedienungsanleitung

Case

Case 385 Diesel Installationsanleitung

AL-KO

AL-KO Heritage RS 14/82 Bedienungsanleitung

Webb

Webb WE1742SD Bedienungsanleitung

MacDon

MacDon 9250 Bedienungsanleitung

Toro

Toro 03200 Reelmaster 3100-D Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON 5400 Series Bedienungsanleitung

Case

Case JX 90 Bedienungsanleitung

Iseki

Iseki TXG23 Bedienungsanleitung

Toro

Toro 25429 Bedienungsanleitung

New Holland

New Holland T4.80V Bedienungsanleitung

Gravely

Gravely D Bedienungsanleitung