KUHN Hector 3000 Bedienungsanleitung

KC0012GB F

Complementary instructions

Pneumatic seed drills

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

KC0012GB F

- English - 10-2008

Dear Owner

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

$Dear Owner

In buying a Kuhn machine you have chosen wisely. Into it have gone years of thought, research and

improvement. You will find, as have thousands of owners all over the world, that you have the best that

engineering skill and actual field testing can produce. You have purchased a dependable machine, but only

through proper care and operation can you expect to receive the performance and long service built into it.

This manual contains all the necessary information for you to receive full efficiency from your machine. The

performance you get from this machine is largely dependent on how well you read and understand this manual

and apply this knowledge. Please DO NOT ASSUME YOU KNOW HOW TO OPERATE AND MAINTAIN YOUR

MACHINE before reading this manual carefully. KEEP THIS MANUAL AVAILABLE FOR REFERENCE. Pass

it on to the next owner if you re-sell the machine.

Your KUHN dealer can offer a complete line of genuine KUHN service parts. These parts are manufactured and

carefully inspected in the same factory that builds the machine to assure high quality and accurate fitting of any

necessary replacements.

About improvements

We are continually striving to improve our products. It therefore reserves the right to make improvements or

changes when it becomes practical to do so, without incurring any obligations to make changes or additions to

the equipment sold previously.

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

Contents

$Contents

Dear Owner.....................................................................................................................1

Contents .........................................................................................................................2

Control box identification .............................................................................................4

Front view......................................................................................................................................... 4

Manufacturer's marking .................................................................................................................. 5

Optional equipment......................................................................................................................... 5

Safety..............................................................................................................................6

Description of symbols used in this document............................................................................ 6

Safety instructions........................................................................................................................... 7

Specifications.................................................................................................................9

Technical specifications ................................................................................................................. 9

Description of the box................................................................................................................... 10

Meaning of symbols ...................................................................................................................... 11

Description of the controls........................................................................................................... 11

Assembly and fitting....................................................................................................14

Description of the connection...................................................................................................... 14

Electrical diagrams........................................................................................................................ 18

Positioning and parking................................................................................................................ 21

Contents

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

Putting into service......................................................................................................22

Switches on the control box......................................................................................................... 22

Machine use..................................................................................................................23

Adjustments before first use........................................................................................................ 23

Preliminary adjustments at work .................................................................................................28

Use during work............................................................................................................................. 51

Simple maintenance.....................................................................................................55

Error codes..................................................................................................................................... 55

Adjusting the sensors................................................................................................................... 57

Optional equipment......................................................................................................58

Pre-emergence marker.................................................................................................................. 58

Maintenance and storage ............................................................................................59

Limited warranty...........................................................................................................60

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

Control box identification

$Control box identification

1. Front view

Control box identification

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

2. Manufacturer's marking

Please note the serial number of your equipment. This

information is to be indicated to the dealer for all spare

parts orders.

Type:

Serial no.:

KUHN reference:

The software version: 2.2

3. Optional equipment

Tick box corresponding to the equipment fitted on your

machine:

Pre-emergence marker

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

Safety

$Safety

1. Description of symbols used in this

document

This symbol indicates a potentially hazardous situation

that if not avoided, could result in serious bodily injury.

This symbol is used to identify special instructions or

procedures which, if not followed strictly, could result in

machinery damage.

This symbol is used to communicate technical

information of particular interest.

Safety

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

2. Safety instructions

Read and follow the safety instructions

Before using the control box, carefully read all safety

instructions in this manual.

The operator must be familiar with all machine controls

and their respective functions. It is too late to learn once

work has been started!

Never let anyone operate the machine who is not trained

to do so.

Should you have any difficulties in understanding certain

parts in this manual, please contact your KUHN dealer.

Precautions to take before using the

control box

Place the control box so that it cannot interfere with other

tractor controls and be activated inadvertently.

Before switching the control box on, check that nobody

is within the machine pivoting area: switching on the

control box can activate functions on the machine.

Precautions to take when using the control

box

Do not operate the control box while a person is carrying

out work on the machine.

Switch off control box before carrying out any

maintenance or repair work on the machine.

Introduction

The operator must follow the safety instructions in this manual and in the machine's operator's manual as well

as respect the warnings posted on the machine.

VENTA \ MEGANT \ HR6003CSR \ HR6004CSR

HECTOR 3000

Safety

Precautions when driving

Before transporting the machine on public roads, make

sure no function of the control box or of the control

accessories can be switched on inadvertently. Make

sure tractor valves and power take-off are deactivated

and not inadvertently engaged.

Andere Handbücher für Hector 3000

Inhaltsverzeichnis

Andere KUHN Steuereinheit Handbücher

KUHN

KUHN RPB Betriebsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung