Kuppersberg FA6VS01 Kurzanleitung

TECHNICAL PASSPORT

ПАСПОРТ ТЕХНИЧЕСКОГО ИЗДЕЛИЯ

FA6VS01

ELECTRIC HOB

ЭЛЕКТРИЧЕСКАЯ ВАРОЧНАЯ ПОВЕРХНОСТЬ

TECHNICAL PASSPORT ENGLISH

Electric Hob

DEAR USER .................................................................................................................................. 3

DESCRIPTION OF THE HOB............................................................................................... 4

USE ................................................................................................................................................... 5

BASIC FUNCTIONS .................................................................................................................. 7

CLEANING..................................................................................................................................... 9

INSTALLATION .......................................................................................................................... 9

TECHNICAL CHARACTERISTICS OF THE ELECTRICAL COMPONENTS..... 13

TECHNICAL ASSISTANCE AND SPARE PARTS.......................................................... 14

TROUBLESHOOTING –PROBLEM SOLVING ............................................................. 14

CONTENTS

ENGLISH TECHNICAL PASSPORT

Electric Hob

DEAR USER,

We are sincerely grateful to you for purchasing one of our products.

We are sure that this modern, functional and easy to use appliance,manufactured

with the top-quality materials and components will satisfy all your needs.

We ask you to read carefully the instructions of this manual.

The appliance must be installed only by a qualiﬁ ed electrician in compliance

with the instructions provided. The manufacturer declines all responsability for

improper installation.

The manufacturer is not responsible for any transcription errors or misprints

contained in this handbook and, furthermore, reserves the right to make any

modiﬁ cation on the products, which might be deemed necessary or usefull, this

being in the user’s interest, without altering their basic operating or safety features.

TECHNICAL PASSPORT ENGLISH

Electric Hob

DESCRIPTION OF THE HOB

FA6VS01

FA6VS02

Guide to Using the

Instructions Booklet

You should keep the Guarantee

Certiﬁ cate or, where relevant, the

technical datasheet,together with the

Instruction Manual for the duration

of the useful life of the appliance. It

has important technical information

about the appliance.

Safety instructions

Before ﬁ rst use, you should carefully

read the installation and connection

instructions.

These hob models may be installed

in the same kitchen furniture units as

company brand ovens. For your safety,

installation should be carried out by

an authorised technician and should

comply with existing installation

standards. Likewise, any internal work

on the hob should only be done by

company technical staff, including the

change of the  exible supply cable of

the appliance.

Safety warnings:

If the ceramic glass breaksor

cracks, immediately unplug the

appliance to avoid electric shocks.

This appliance is not designed to

work with an external timer (not built

into the appliance) or a separate remote

control system.

Do not steam clean this

appliance.

The appliance and its accessible

parts may heat up during operation.

Avoid touchingtheheating elements.

Children younger than 8 years old must

stay away from the appliance unless

they are permanently supervised.

Children who are 8 years

old or older, people with impaired

physical, sensory or mental abilities,

or those who are lack of experience

and knowledge may use this appliance.

ONLY whentheyare supervised or if they

have beengivenadequate instruction

on the use of the appliance and

understand thedangersitsuse involves.

User cleaning and maintenance may not

be done by unsupervised children.

Children must not play with the

appliance.

ENGLISH TECHNICAL PASSPORT

Electric Hob

Precaution. It is dangerous

to cook with fat or oil without being

present, as these may catch ﬁ re. Never

try to extinguish a ﬁ re with water! In

this case disconnect the appliance and

cover the  ames with a lid, a plate or a

blanket.

Do not store any object on

the cooking areas of the appliance .

Preventa possible ﬁ re hazard.

Do not use plastic pots or

alliminium sheets

Do not use hob as a

supplamentary surface

Dry the bottom of the pot before

put in on the cooking zones

Do not scrape the pot against

the glass to avoid damaging it

Use pots with the same diameter

of cooking zones

USE

COOKTOP CONTROLLED BY

TOUCH CONTROL

The graphical display is shown in

ﬁ gures 1,2,3 . As you see, the diameters

and thus the powers of heating elements

vary as shown in Table 1. Heating

elements are controlled by this control

unit with 9 positions. When supply

voltage is applied the hob control unit

carries out an automatic calibrat ion

procedure. The hob is thereafter in

stand-by mode.

All the heat zones are switched off

and t he display are not illum inated.

The desired heating element can

now be selected by using the 4,5,6 or

7 sensors for related heating elements

(see ﬁ g. 1,2). Heat settings of the

selected heating element adjusted by

using the (-) sensor which is shown

as»3»in Figure 1 to reduce, (+) sensor

which is shown as «2»in F igure 1 to

increase the heat level.

There are 9 heat setting modes

starting from 1 to 9. «1» is the minimum

and «9» is the maximum mode.

You can see the suggested cookings

in Table 2.

When a heating element has been

switch off by means of on/off sensor, an

«H» appears on the illustrated display

to show that the heating element is still

hot for 30 minutes in order to avoid any

accident.

For the hobs included dual zone

heating elements.

Outer part of dual zone heating

element could not work separately.

There are two possibility, one is using

inner part of the heating and the other

one is using both. Inner part of it can

be activated by pushing related control

unit however to activate the whole

heating element, it is needed to push

related control unit for inner part ﬁ rst

and then related control unit of outer

part.

TECHNICAL PASSPORT ENGLISH

Electric Hob

Power and dimensions of the cooking

zones

Diameter

(mm)

Heating

elements

Power

1 140 Radiant

"Hi-light" 1200

2180 Radiant

"Hi-light" 1800

3210 Radiant

"Hi-light" 2100

4270/210 Radiant

Double

"Hi-light"

2400

5210/175 Radiant

Double

"Hi-light"

2000

TABLE 2

Touch control

Heat settings

Possible

cookings

1To melt butter, chocolate

and else.

1-3

To heat small quantities of

liquid and to keep dishes

warm.

3-4

To heat foods. Thaw deep-

frozen foods, to cook fruits

and pulses.

4-5 Deep-frozen foods, to cook

fruits and pulses.

5-6 To cook meat, ﬁ sh, pulses

with sauce.

6-7 To cook roast of meat, ﬁ sh;

to cook steaks and eggs.

7-9 To fry with oil and to heat

big quantities of water.

Controller Types and Use

Control Panel

FA6VS02

FA6VS01

1. On/off sensor

2. Heating level increment (+) sensor

3. Heating level decrement (-) sensor

4. Front left zone activation sensor

5. Rear left zone activation sensor

6. Rear right zone activation sensor

7. Front right zone activation sensor

8. Led for secondary zone at rear left

9. Heating level indicator

10. Timer displays

11. Double zone selecting

FIG. 1

FIG. 2

TABLE 1

ENGLISH TECHNICAL PASSPORT

Electric Hob

BASIC FUNCTIONS

Children’s safety

Switching on the child

safety locks

To activate the child safety feature;

switch on the Touch Control. Press and

hold the front left cooking zone.

After this press the MINUS button

(3) for 2 seconds. An «L» standing for

LOCKED (child safety feature preventing

unintended switch on) will be indicated

on all displays. If a cooking zone is in

«hot» mode, «L» and «H» is going to be

alternately displayed.

Switching off the child

safety locks

Follow the same process with

activation off child lock.

Heat-up Function (A Mode)

This feature enables you to set the

start time for rapid cooking. The touch

control pre-programs the selected hot

plate to full power you have chosen

after a certain length of time. Length of

time as second is shown in Table 3 for

each zone.

Activating Heat-up Function

Select the heating Level 9 and then

press PLUS button. A and 9  ash on

display alternately. Now use the MINUS

button to select constant cooking level

you want.

Example: You want to cook at heating

Level 6 and begin with rapid heating.

Select Level 9, press PLUS button again

and the heating level indicator will

 ash on and off, alternating between 9

and A, then decrease it to Level 6 using

sensor MINUS button. The system will

keep the hotplate at Level 9 (full power)

for 2,5 minutes ( 150 seconds in Table3),

 ashing on and off alternately between

6 and A, then (after 2,5 minutes) it will

automatically decrease to constant

cooking level 6.

To change the constant cooking

level, While  ashing A and constant

Level, Select the new constant cooking

level.

Deactivating Heat-up Function

To deactivate the heat up function,

after selecting the heating zone press

MINUS button.

Double Zone Button

Press the left rear heating zone

button twice.

Max operating times are shown

TABLE 3 for every heating levels.

Heating

level

Max.

operating

time (h)

Heat up

function (sec)

0 0 0

U20

1 6 60

26 180

3 5 288

4 5 390

5 4 510

6 1,5 150

7 1,5 210

8 1,5 270

9 1,5 150

TABLE 3

TECHNICAL PASSPORT ENGLISH

Electric Hob

Keep Warm Function – U Mode

Keep warm function is located

between level 0 and level 1. It is Shown

by «U». To enable this function, set the

heating level to 1 and press MINUS

button.

Fast Switch Off

The cooking zone button and

«MINUS» button are pressed at the

same time.

Timer Function With Switch Off

Activate the cooking zone that you

want to set time. Press «+» and «-»

buttons at the same time. «00» will

appear on the timer display. Time (in

minutes) is adjusted by pressing «+»

button to increase or «-» button to

decrease. To cancel the timer, select

related cooking zone and activating the

timer by pressing «+» and «-» buttons

of the same time. Later press and hold

the «-» button untill you see the «00»

on timer displays.

Timer function without

switch off

After switching on the touch

control, before selecting any cooking

zone, press «+» and «-» buttons at the

same time. «00» will ash on timer

displays. Adjust the timer (in minutes)

by pressing «+» or «-» buttons. When

the countdown reaches «00», you will

the hear the alarm. None of the heating

elements are switched off.

FA6VS01 - FA6VS02

Fast Switch off Function

When cooking zone is active, ‘’+’’ and

‘’-’’ buttons are pressed at the same time.

Cooking zone heating level is going to

be ‘’0’’

Child Lock

To activate the child lock, pres the ‘’-’’

and front left cooking zone buttons at

the same time. After beep sound press

the front left cooking zone button, ‘’L’’ is

shown all displays.

To cancel the this function, press the

‘’-’’ and front left cooking zone button.

So, You temprorarily disabled the child

lock. This means when the hob re

opened, the child lock is re activated.

To cancel this function permanently,

press ‘’-’’ and front left cooking zone

button. After beep sound press the

MINUS button again. TC switch off

automatically. When the hob is re

pened,.the child lock is inactive.

ENGLISH TECHNICAL PASSPORT

Electric Hob

Power

level Max. operating time (h)

0 0

1 6

3 5

4 5

5 4

6 1.5

7 1,5

8 1,5

9 1.5

TABLE 4

CLEANING

Before any cleaning operation,

switch off the appliance.

It is very important to clean the

surface soon after every use, when the

glass is still tep id.

Do not use metallic sponges, powder

abrasives or corrosive sprays.

Depending on the dirty level we

recommend:

Slight stains: it is enought the use

of a m oist clean rag.

Burnt or soiling may be removed

with a special razor scraper (ﬁ g. 5); be

aware that the razor can cause wounds.

Marks of liquid, over owed from

the pot, can be removed using vinegar or

lemon.

Pay attention not to let sugar

or sugary foods fall on the hob. In this

case switch off the hob and clean the

surfacewith hot water and razor scraper.

INSTALLATION

TECHNICAL INSTRUCTIONS FOR

THE INSTALLER

Installation, transformations and

maintenances listed below, may only be

carried out by a competent techn ician.

A wrong installation may provoke

damages to persons, animals or things,

for which the manufacturer can not be

responsible.

During the life of the unit, the

automatic safety or regulating devices

on the appliance may only be modiﬁ ed

by the manufacturer or by his duly

authorized dealer.

After having cleared out all the

packing components, make sure of

the integrity of the appliance. In case

of doubt, do not use the appliance

and contact qualiﬁ ed personnel.

After a period of time, metal re ex

andscratches may appear {ﬁ g. 6) due to

the wrong cleaning and the wrong use

of the pots. The scratches are difﬁ cultly

removable, but they do not compromise

the good working of the hob.

TECHNICAL PASSPORT ENGLISH

Electric Hob

TABLE 5

COMPLY WITH THE

DIMENSIONS (in mm)

MODEL

Overall

dimensions of

hob

Cut out

dimensions of

kitchen unit

A in

B in

С in

(±2 )

D in

mm (

±2 )

F6VS01 510 580 480 560

INSTALLATION

FIXING

There is a special sealing washer

supplied with the hob. In order to avoid

any water inﬁ ltration underneath the

hob. To ﬁ x the s ealing washer, please

respect to following instructions:

1. Turnover the hob, take off the seal

from the guard. Correctly place the s

ealing washer «e»(ﬁ g 9) under the hob.

Be sure to place the sealing washer

so that the external side ofthe sealing

washer ﬁ ts together with the external

perimetrical edge of the hob. The ends

of the s e aling washer must ﬁ t together

without overla pping.

2. Stick the sealing washer to the

hob uniformly. Presing it by ﬁ ngers.

(Figure 9)

3. Place the hotplate in the openning

on the table

top.

4. Fix the hooks in the relative

accomodations of the body with the

screws F. (see Figure 8)

In order to avoid accidental touch

with the overheating bottom of the hob

during the working, is necessary to put

a wooden insert, ﬁ xed by screws, at a

minimum distance of 70 mm from the

bottom of the hob ( see Fig. 11).

WARNINGS:

Be aware that the glue that join

the hob to the furniture, has to resist

to temperature higher than 150° C, to

avoid the unstuck of the panelling.

TECHNICAL DRAWINGS

FA6VS01

FIG. 7

Please keep children away from all

packing elements ( carton, polystyrene,

nails,..).

Make a cutout in the worktop (in

Table 5), according to the d i m e n sions

indicated in ﬁ g. 7; make sure that will

be respected the critical dimensions

between the hob, the lateral walls, the

back and the superior walls (see ﬁ g. 7).

Inhaltsverzeichnis

Sprachen:

Andere Kuppersberg Kochfeld Handbücher

Kuppersberg

Kuppersberg FA6VS02 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg EMS 901 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg ESO 602 Bedienungsanleitung

Kuppersberg

Kuppersberg FS 604 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg ECO 302 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg ESO 622 R Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg ECO 301 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg FBG 36 BG Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg FV6TGRZ Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg FA9RC Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg FQ 601 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg TG 699 Bedienungsanleitung

Kuppersberg

Kuppersberg FG 601 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg FA9VF05 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg FQ 42 B Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg ICS 612 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg FG 64 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg EGS 600 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg ECO 301 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg TG 699 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg ECO 411 Montage- und Wartungsanleitung

Kuppersberg

Kuppersberg FT6VS09 Bedienungsanleitung

Kuppersberg

Kuppersberg TS 799 Bedienungsanleitung

Kuppersberg

Kuppersberg FA6IF01 Montage- und Wartungsanleitung

Beliebte Kochfeld Handbücher anderer Marken

Siemens

Siemens EX875KYV1E Technisches Datenblatt

AEG

AEG CERAMIC HOB 6010 K Bedienungsanleitung

VALERA

VALERA CT 70A Bedienungsanleitung

Zanussi

Zanussi ZGF 6420 Bedienungsanleitung

Gaggenau

Gaggenau CI 273 Bedienungsanleitung

G3 Ferrari

G3 Ferrari Energy Bedienungsanleitung

Pkm

Pkm IN4B Bedienungsanleitung

Award

Award H903BG Bedienungsanleitung

Zanussi

Zanussi VCH 5005 RZ Bedienungsanleitung

Miele

Miele KM 523 Bedienungsanleitung

Hotpoint

Hotpoint IS67V8CCXT/E Bedienungsanleitung

AEG

AEG HK854870XB Bedienungsanleitung

Cookology

Cookology SEP600BK Bedienungsanleitung

Bauknecht

Bauknecht Hob Bedienungsanleitung

Zanussi

Zanussi ZGM 782 Bedienungsanleitung

dipo INDUCTION

dipo INDUCTION DIBK218S Bedienungsanleitung

Miele

Miele KM 5987 Bedienungsanleitung

Miele

Miele KM 360 G Bedienungsanleitung