Kusam-meco 8010 Bedienungsanleitung

TEMPERATURE / HUMIDITY

/DEW POINT METER

Users Manual

■. Introduction

Thank you for purchasing the temperature/humidity/dew

point meter from us. Please take a few minutes to

browse through this user manual before you begin to

operate the meter to ensure that you are fully

familiarized with how best to operate the meter as

accurately and safely as possible.

The meter is a temperature and humidity measuring

instrument. It is normally used to measure the humidity

and temperature in offices, storerooms, buildings and

greenhouses.

1.1 Precautions safety measures

To get the best service from this meter, please read this

user's manual carefully and observe the detailed safety

precautions strictly.

1.1.1 During use

1. Don't touch the humidity sensor.

2. Don't expose the sensor to direct light, this causes a

false reading.

3. Never store the product together with solvents,

acides or other aggressive substances.

1.1.2 Maintaining the product

Do not measure at a high temperature places.

When not using the instrument for a long time,

please remove the battery and avoid storing in high

temperature and high humidity.

■. Features

1. Display: 4 digits LCD Display

2. Parameters: ℃, ℉, %RH(relative humidity),

td(dew point temperature)

3. Resolution: 0.1℃, 0.1℉, 0.1%RH

4. Range: -10 ～+50℃, +14 ～+122℉,

0 ～+100%RH

5. Accuracy: ±1.0℃, ±1.8℉, ±3%RH（5～95%RH）

6. Sample rate: 1 time /sec

7. auto power off: about 20 minutes

8. Operating environment:

-10 ～+50℃, +14 ～+122℉

9. Storage environment:

-20 ～+60℃, -4 ～+140℉

10. Dimension and Weight:

121(L)x60(W)x30(H)mm, about 180g

11. Accessories: DC1.5V (AAA) x 3pcs

String x 1pcs

Users manual x 1pcs

■. Names of parts

Instrument Familiarization

1. Sensor cover

2. Sensor

3. LCD display

4. Function key

LCD Display

ON/OFF

Unit Mode Hold

Light

Temperature/Humidity

/Dew point Meter

The meaning of the symbols represented by the

following：

1. Indicating it is now in the data-holding state

2. Indication to back light

3. Display zone

4. Display zone

5. Maximum / Minimize

6. Humidity units

7. Temperature units

8. Indication to low voltage of the batteries

■. Operation Instruction

*NOTE: In order to ensure the accuracy of the

measurement readings, all the interference sources

which may affect the measurement results about

temperature and humidity (such as the hand) must be

away from the sensor.

1. Put the instrument with enough battery power in the

hand, press the ON/OFF key to turn the power on and

enter into the measuring mode. The LCD will display the

current value of temperature and humidity. The default

humidity / temperature unit is % RH / ℃.

2. Press Unit key to change the humidity / temperature

unit. The adjustable parameters are %RH(relative humidity),

td(Dew-point temperature), ℃, ℉; press the Mode and

key to change MAX/MIN and HOLD mode.

3. Switching the back light on

HOLD

Light

HOLD

Light

When the meter is power on, press key >2sec.

the back light will be turned on, and the icon will

display on the LCD. Press the key once >2sec. the light

will be turned off, and the icon will disappeared.

If you still need more operations, please see the

description of function keys.

■. Function keys

1. ON/OFF key

Press the key to turn the power ON and press the key

once more >2sec. to turn the power OFF.

2. Mode key

Press the key can select the state of MAX、MIN.

LCD will display the max/min values since the

instrument was last switched on or last reset.

3. Unit key

Press the key can change the parameter unit.

Adjustable units: %RH/℃,td/℃,%RH/℉,td/℉.

4. key

Press the key, a icon will display on the LCD and the

HOLD

Light

Inhaltsverzeichnis

Andere Kusam-meco Multimeter Handbücher

Kusam-meco

Kusam-meco M3511A Bedienungsanleitung

Kusam-meco

Kusam-meco KM 839 Bedienungsanleitung

Kusam-meco

Kusam-meco 801-L Bedienungsanleitung

Kusam-meco

Kusam-meco KM 520B Bedienungsanleitung

Kusam-meco

Kusam-meco KM 255 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 60-T Bedienungsanleitung

Kusam-meco

Kusam-meco KM-DMM-41 Installationshandbuch

Kusam-meco

Kusam-meco KM 8045 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 829 Bedienungsanleitung

Kusam-meco

Kusam-meco 2772 Bedienungsanleitung

Kusam-meco

Kusam-meco 603 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 6030 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 878 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 235 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 887 Installationshandbuch

Kusam-meco

Kusam-meco 2754A Bedienungsanleitung

Kusam-meco

Kusam-meco KM 6050 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 629 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 807s Bedienungsanleitung

Kusam-meco

Kusam-meco KM-459 Bedienungsanleitung

Kusam-meco

Kusam-meco KM 5040-T Bedienungsanleitung

Kusam-meco

Kusam-meco M3500A Bedienungsanleitung

Kusam-meco

Kusam-meco KM 822EX Bedienungsanleitung

Kusam-meco

Kusam-meco KM 233 Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung