Kval 555 Bedienungsanleitung

KVAL INC.

INSTRUCTION MANUAL

555

Door Sizer

REV.2

KVAL INC.

Operator’s and Parts Manual

For further information about this manual or other Kval Incorporated products, contact the Customer Support Department, Kval

Incorporated, 825 Petaluma Boulevard South, Petaluma, CA 94952. In the U.S and Canada, call (800) 553-5825 or fax (707)

762-0485. Outside the U.S. and Canada, call (707) 762-7367.

Kval Incorporated welcomes your opinion regarding this document. Please send them to the Customer Support address shown

above.

products is not intended to imply affiliation with or sponsorship of Kval Incorporated.

Proprietary Notice

This document contains confidential and trade secret information, which is proprietary to Kval, Inc. (“Kval”), and is protected by

laws pertaining to such materials. This document, the information in this document, and all rights there to are the sole and exclusive

property of Kval, are intended for use by customers and employees of Kval, and are not to be copied, used, or disclosed to anyone,

in whole or in part, without the express written permission of Kval. For authorization to copy this information, please call Kval

Customer Support at

825 Petaluma Blvd So.

Phone (707)-762-7367 • Fax (707)-762-0485

www.kvalinc.com

Congratulations on your purchase of a new KVAL

555

SERIAL

No._____________________________________________

DATE OF

PURCHASED___________________________________

This manual is designed with safety in mind. We at KVAL want to begin

FAST and SAFE production as soon as possible. It is very important that

all OPERATORS and MAINTENANCE personal read this manual

thoroughly. We have included important safety information that will help

prevent serious injury; as well as complete maintenance, and

troubleshooting instructions.

Proper operation and maintenance of your new KVAL machine will

guarantee many years of trouble-free, fast-paced production.

CustomerServiceInformation

KVAL is happy to help its customer make the most of their investment, and

help solve any problems that may occur. When you call, please have the

electrical print, air print number, and the serial number of the machine ready, so

that we are able to accommodate your needs efficiently.

HOURS

6:30 AM to 4:30 PM Pacific Standard Time – Monday thru Friday

Phone: (800)-553-5825

Fax: (707) 762-0485

www.kvalinc.com

ReturningParts/ EquipmenttoKVAL

Before returning parts and/or equipment to Kval Inc. please call KVAL at (707)

762-7367 to receive RMA # (Return Merchandise Authorization number).

*Note Non-Warranty returns are subject to 15% Re-stocking Charge.

When you call

1. Have your Packing Slip and/or invoice #’s available

2. Have reason for return available

When sending merchandise back

1. Make sure that the Item(s) you are returning are securely packaged and well protected

from shipping damage.

2. Including Packing Slip #

3. Include your RMA # on the outside of the package so our shipping receiver will see it.

Kval tries hard to satisfy its Customers, if you have any questions concerning merchandise

purchased through KVAL, please call.

GettingStarted

Your new KVAL Machine arrives at your plant crated, banded, taped and has painted

set collars on all shafts; keeping all of the precision moving parts secure during shipping.

1. Move the machine as close to the area it will be stationed before removing the

crate to protect against damaging the machine with the forklift.

2. Remove the machine from the crate. Be careful! Anytime the machine is lifted

to remove the skids there is a chance of the machine dropping suddenly, and

damaging the machine, or injuring people near the machine.

3. Remove all painted set collars from the shafts. Just about every shaft on the

machine has set collars to secure the moveable assembly mounted to the

shafts.

4. Take off any tape securing the various buttons, switches and knobs.

5. Level your KVAL machine by putting metal shims underneath the corners of

the base. Leave a clear shot from the bolt holes in the foot pads to your shop

floor. Now, make sure the machine won’t rock back and forth.

6. Once the machine is level, anchor it to the floor so that it won’t move across

the floor during operation. KVAL recommends a ½ RED HEAD, TRUE

BOLT ANCHOR in each of the foot pads. When drilling the concrete for the

anchor bolts use a 5/8 bit.

Note

KVAL wants to provide the industry’s safest and highest quality wood working

machines. The following page is a quality control and safety checklist. Our

technicians have already performed an initial quality control check before

shipping your machine. Please review the checklist and return

“Acknowledgment Copy” to KVAL Verifying complete contents.

SafetyFirstDanger

This section contains important safety information. Failure to

follow these safety guidelines may subject the operator to

physical hazards that may result in serious bodily arm, or death.

Inhaltsverzeichnis

Andere Kval Industrieanlagen Handbücher

Beliebte Industrieanlagen Handbücher anderer Marken

ABB

ABB Unifix AD Handbuch

Mark 7

Mark 7 Evolution Bedienungsanleitung

Husky

Husky HyPET Bedienungsanleitung

bora

bora PM-1800 Bedienungsanleitung

Grizzly

Grizzly T32428 Bedienungsanleitung

Siemens

Siemens 8MF1 Series Bedienungsanleitung

ABB

ABB HT610965 Bedienungsanleitung

ABB

ABB SafeLink Bedienungsanleitung

Phoenix

Phoenix PHX-150 Bedienungsanleitung

ABB

ABB A165-L32 Bedienungsanleitung

ABB

ABB HT842936 Bedienungsanleitung

Hermetica

Hermetica 10 Series Bedienungsanleitung

HORNER

HORNER OEE Solution Bedienungsanleitung

Hammerhead

Hammerhead HG375 Bedienungsanleitung

SCHUNK

SCHUNK VERO-S NSE-A3 138 Gebrauchsanweisung

ABB

ABB HT566657 Bedienungsanleitung

Webasto

Webasto GSE CAN Bedienungsanleitung

ABB

ABB HT614003 Bedienungsanleitung