Kyocera FS-820 Bedienungsanleitung

Operation Guide

FS-820

FS-920

OPERATION GUIDE i

Contents

1 Machine Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Key Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Paper Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Prepare the Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Loading Paper into a Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Manual Feed Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting to Parallel Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting to USB Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting to Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4 Loading Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Printing a Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Manual Duplex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Toner Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Cleaning the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Prolonged Non-Use and Moving the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

7 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Print Quality Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

8 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

9 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ii OPERATION GUIDE

OPERATION GUIDE iii

Legal and Safety

Information

FCC statement (for users in the United States)

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

• This device may not cause harmful interference

• This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the manufacturer for

compliance could void the user’s authority to operate the equipment.

Shielded circular cable should be used for interfacing with the computer.

Precautions for Use

Any modification without prior permission may cause harmful interference.

If any modification/change is introduced to this equipment without prior

permission, the manufacturer cannot guarantee compliance with FCC

rules. To use equipment which does not comply with FCC rules is

prohibited.

Legal and Safety Information

iv OPERATION GUIDE

Interface connectors

IMPORTANT: Ensure the printer is powered off before connecting or

disconnecting an interface cable to the printer.

IMPORTANT: For protection against static discharge which may be

applied to the printer's internal electronics through the interface

connector(s), keep any interface connector which is not in use capped

using the protective cap supplied.

NOTE: Use shielded interface cable.

Safety information

Laser safety

This printer is certified as a Class 1 laser product under the U.S.

Department of Health and Human Services (DHHS) Radiation

Performance Standard according to Radiation Control for Health and

Safety Act of 1968. This means that the printer does not produce

hazardous laser radiation. Since radiation emitted inside the printer is

completely confined within protective housings and external covers, the

laser beam cannot escape from the printer during any phase of user

operation.

Laser notice

This printer is certified in the U.S. to conform to the requirements of DHHS

21 CFR, Chapter I, Subchapter for Class I (1) laser products, and

elsewhere is certified as a Class I laser product conforming to the

requirements of IEC 825.

DANGER: CLASS 3B INVISIBLE LASER RADIATION WHEN

OPEN. AVOID DIRECT EXPOSURE TO BEAM.

CAUTION: Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous radiation

exposure.

Legal and Safety Information

OPERATION GUIDE v

Caution Labels

CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the U.S. Food

and Drug Administration implemented regulations for laser products on

August 2, 1976. These regulations apply to laser products manufactured

after August 1, 1976. Compliance is mandatory for products marketed in

the United States. A label indicating compliance with the CDRH regulations

must be attached to laser products marketed in the United States.

NOTE: Do not remove these labels.

Label inside the printer

(Laser radiation warning)

Label on the printer’s rear panel

European/

Asian/Pacific

countries

U.S.A./Canada

Label inside the rear

Legal and Safety Information

vi OPERATION GUIDE

Ozone Concentration

The printers generate ozone gas (O3) which may concentrate in the place

of installation and cause an unpleasant smell. To minimize concentration

of ozone gas to less than 0.1 ppm, we recommend the printer is not located

in a confined area where ventilation may be blocked.

IMPORTANT SAFEGUARDS

1Read all of these instructions and save these instructions for later

use.

2Unplug this product from the wall outlet before cleaning.

3Do not use this product near water.

4Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

5Slots and openings in the cabinet and the back are provided for

ventilation to ensure reliable operation of the product and to protect it

from overheating, these openings must not be blocked or covered.

The openings should never be blocked by placing the product on a

bed, sofa, rug, or other similar surface. This product should never be

placed near or over a radiator or heat register. This product should

not be placed in a built-in installation unless proper ventilation is

provided.

6This product is equipped with a 3-wire grounding type plug, a plug

having a third (grounding) pin. This plug will only fit into a grounding-

type power outlet. This is a safety feature. If you are unable to insert

the plug into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the purpose of the grounding-type

plug.

7Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

8If an extension cord is used with this product, make sure that the total

of the ampere ratings on the products plugged into the extension

cord do not exceed the extension cord ampere rating.

9Never push objects of any kind into this product through cabinet slots

as they may touch dangerous voltage points or short out parts that

could result in a risk of fire or electric shock. Never spill liquid of any

kind on the product.

10 Except as explained elsewhere in the Operation Guide, do not

attempt to service this product yourself. Removing covers may

expose you to dangerous voltage points or other risks. Refer all

servicing in those compartments to a service technician.

11 Unplug this product from the wall outlet and refer servicing to a

qualified service technician under the following conditions:

- When the power cord or plug is damaged or frayed.

- If liquid has been spilled into the product.

- If the product has been exposed to rain or water.

Legal and Safety Information

OPERATION GUIDE vii

- If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions since improper adjustment

of other controls may result in damage and will often require

extensive work by a qualified technician to restore the product to

normal operation.

- If the product has been dropped or the cabinet has been damaged.

Canadian Department of Communications compliance statement

This Class B digital apparatus complies with Canadian ICES-003.

Avis de conformitè aux normes du ministère des

Communications du Canada

Cet appareil numèrique de à la classe B est conforme à la norme NMB-003

du Canada.

ISO 7779

Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991: Der

höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäß ISO

7779.

CE Marking Directive

According to Council Directive 89/336/EEC and 73/23/EEC

Manufacturer’s name: Kyocera Mita Corporation, Tamaki Plant

Manufacturer’s address: 704-19 Nojino, Tamaki-Cho, Watarai-Gun,

Mie Ken 519-0497, Japan

Declares that the product:

Product name: Page Printer

Model number: FS-820 / FS-920

Conforms to the following product specifications:

- EN 55 022:1998 Class B

- EN 61 000-3-2:2000

- EN 61 000-3-3:1995+A1:2001

- EN 55 024:1998

- EN 60 950:2000

- EN 60 825-1:1994+A1+A2

Legal and Safety Information

viii OPERATION GUIDE

The manufacturer and its merchandising companies retain the following

technical documentation in anticipation of the inspection that may be

conducted by the authorities concerned.

- User’s instruction that conforms to the applicable specifications.

- Technical drawings.

- Descriptions of the procedures that guarantee the conformity.

- Other technical information.

Declaration of Conformity (Australia)

Manufacturer’s name: Kyocera Mita Corporation, Tamaki Plant

Manufacturer’s address: 704-19 Nojino, Tamaki-Cho, Watarai-Gun,

Mie-Ken 519-0497, Japan

Declares that the product:

Product name: Page Printer

Model number: FS-820 / FS-920

Description of device: This Page Printer Model FS-820 is the 16 ppm

(FS-920 is the 18 ppm); A4 size and utilized

plain paper; laser; dry toner etc.

Conforms to the following product specifications.

- AS/NZS 3548: 1995 (EN 55 022:1994 Class B)

- IEC60950 (EN 60 950:2000)

- IEC60825-1 (EN 60 825-1:1994+A1+A2)

The manufacturer and its merchandising companies retain the following

technical documentation in anticipation of the inspection that may be

conducted by the authorities concerned.

- User’s instruction that conforms to the applicable specifications.

- Technical drawings.

- Descriptions of the procedures that guarantee the conformity.

- Other technical information.

Kyocera Mita Australia Pty., Ltd.

6-10 Talavera Road, North Ryde, NSW, 2113,

Australia

Phone: +61 2-9888-9999

Fax: +61 2-9888-9588

Andere Handbücher für FS-820

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kyocera Drucker Handbücher

Kyocera

Kyocera Ecosys P2235dw Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-1350DN Bedienungsanleitung

Kyocera

Kyocera ECOSYS P4060DN Bedienungsanleitung

Kyocera

Kyocera FS-C5100DN Bedienungsanleitung

Kyocera

Kyocera Ci1000 Bedienungsanleitung

Kyocera

Kyocera TASKalfa 4820w Bedienungsanleitung

Kyocera

Kyocera KM-4530 Bedienungsanleitung

Kyocera

Kyocera ECOSYS M5526cdw Bedienungsanleitung

Kyocera

Kyocera TASKalfa 2420w Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-3140MFP Installations- und Betriebshandbuch

Kyocera

Kyocera ECOSYS FS-C5150DN Bedienungsanleitung

Kyocera

Kyocera FS-1024MFP Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-6525MFP Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-3140MFP Bedienungsanleitung

Kyocera

Kyocera FS-1750 Bedienungsanleitung

Kyocera

Kyocera FS-1800+ Bedienungsanleitung

Kyocera

Kyocera KYOCERA FS-C8100DN Bedienungsanleitung

Kyocera

Kyocera ECOSYS M6230cidn Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-3140MFP Installations- und Betriebsanleitung

Kyocera

Kyocera FS-1920 Ecosys Bedienungsanleitung

Kyocera

Kyocera KM-3650W Bedienungsanleitung

Kyocera

Kyocera 1102RV3AS0 Bedienungsanleitung

Kyocera

Kyocera FS-C5015N Bedienungsanleitung

Kyocera

Kyocera ECOSYS P4040dn Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung