Kyocera TASKalfa 2551ci Bedienungsanleitung

SERVICE

MANUAL

Published in November 2014

842NP117

2NPSM067

Rev.7

TASKalfa 2551ci

2NP

1-4-1

1-4 Troubleshooting

1-4-1 Paper misfeed detection

(1) Paper misfeed indication

When a paper misfeed occurs, the machine immediately stops printing and displays the paper misfeed mes-

sage on the operation panel. To remove paper misfed in the machine, pull out the cassette, open the paper

conveying unit or paper conveying cover.

The positions and the corrective actions are displayed on the touch panel when a paper jam has occurred.

Figure 1-4-1





















2NP

1-4-2

Figure 1-4-2

(A) Misfeed in the cassette 1

(B) Misfeed in the cassette 2

(D) Misfeed in the MP tray

(E) Misfeed in the duplex unit

(F) Misfeed in the inner tray or fuser section

(G) Misfeed in the document processor (option)

(H) Misfeed in the job separator

(I) Misfeed in the the bridge (option)

(J) Misfeed in the the document finisher (option)























2NP

1-4-3

(2) Paper misfeed detection component

Figure 1-4-3

 





















 



















































2NP

1-4-4

Code Contents Conditions Jam

location*

0000 Initial jam The power is turned on when a sensor in the con-

veying system is on.

0100 Secondary paper feed

request time out

Secondary paper feed request given by the con-

troller is unreachable.

0101 Waiting for process package

to be ready

 -

0104 Waiting for conveying pack-

age to be ready

 -

0106 Paper feeding request for

duplex printing time out

Paper feeding request for duplex printing given by

the controller is unreachable.

0107 Waiting for fuser package to

be ready

 -

0110 Right cover 1 open The right cover 1 is opened during printing. -

0111 Front cover open The front cover is opened during printing. -

0112 Right cover 3 open The right cover 3 is opened during printing. -

0120 Receiving a duplex paper

feeding request while paper

is empty

Paper feed request was received from the duplex

section despite the absence of paper in the duplex

section.

0121 Exceeding number of duplex

pages circulated

The controller issued the duplex section a request

for more pages than the duplex print cycle con-

tains.

0210 Right cover 2 open The right cover 2 is opened during printing. E

0501 No paper feed from cassette

The registration sensor (RS) does not turn on dur-

ing paper feed from cassette 1.

0502 No paper feed from cassette

Feed sensor 1 (FS1) does not turn on during paper

feed from cassette 2 (Retry 1 times).

0503 No paper feed from cassette

Feed sensor 2 (FS2) does not turn on during paper

feed from cassette 3 (Retry 1 times).

0504 No paper feed from cassette

PF feed sensor (PFFS) does not turn on during

paper feed from cassette 4 (Retry 1 times).

0508 No paper feed from duplex

section

The registration sensor (RS) does not turn on dur-

ing paper feed from the duplex section.

0509 No paper feed from MP tray The registration sensor (RS) does not turn on dur-

ing paper feed from the MP tray.

0511 Multiple sheets in cassette 1 The registration sensor (RS) does not turn off dur-

ing paper feed from cassette 1.

0512 Multiple sheets in cassette 2 Feed sensor 1 (FS1) does not turn off during paper

feed from cassette 2.

0513 Multiple sheets in cassette 3 Feed sensor 2 (FS2) does not turn off during paper

feed from cassette 3.

*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).

2NP

1-4-5

0514 Multiple sheets in cassette 4 PF feed sensor (PFFS) does not turn off during

paper feed from cassette 4.

0518 Multiple sheets in duplex

section

The registration sensor (RS) does not turn off dur-

ing paper feed from the duplex section.

0519 Multiple sheets in MP tray The registration sensor (RS) does not turn off dur-

ing paper feed from theMP tray.

0523 No paper feed from cassette

PF feed sensor 1 (PFFS1) does not turn on during

paper feed from cassette 3 (Bulk paper feeder).

0524 No paper feed from cassette

PF feed sensor2 (PFFS2) does not turn on during

paper feed from cassette 4 (Bulk paper feeder).

0533 Multiple sheets in cassette 3 PF feed sensor 1 (PFFS1) does not turn off during

paper feed from cassette 3 (Bulk paper feeder).

0534 Multiple sheets in cassette 4 PF feed sensor 2 (PFFS2) does not turn off during

paper feed from cassette 4 (Bulk paper feeder).

1403 Feed sensor 1 non arrival

jam

Feed sensor 1 (FS1) does not turn on during paper

feed from cassette 3.

1404 Feed sensor 1 (FS1) does not turn on during paper

feed from cassette 4.

1413 Feed sensor 1 stay jam Feed sensor 1 (FS1) does not turn off during paper

feed from cassette 3.

1414 Feed sensor 1 (FS1) does not turn off during paper

feed from cassette 4.

1604 Feed sensor 2 non arrival

jam

Feed sensor 2 (FS2) does not turn on during paper

feed from cassette 4.

1614 Feed sensor 2 stay jam Feed sensor 2 (FS2) does not turn off during paper

feed from cassette 4.

2603 PF feed sensor 1 non arrival

jam

PF conveying sensor 1 (PFPCS1) does not turn on

during paper feed from cassette 3 (Bulk paper

feeder).

2604 PF conveying sensor 1 (PFPCS1) does not turn on

during paper feed from cassette 4 (Bulk paper

feeder).

2613 PF feed sensor 1 stay jam PF conveying sensor 1 (PFPCS1) does not turn off

during paper feed from cassette 3 (Bulk paper

feeder).

2614 PF conveying sensor 1 (PFPCS1) does not turn off

during paper feed from cassette 4 (Bulk paper

feeder).

2704 PF feed sensor 2 non arrival

jam

PF conveying sensor 2 (PFPCS2) does not turn on

during paper feed from cassette 4 (Bulk paper

feeder).

Code Contents Conditions Jam

location*

*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).

2NP

1-4-6

2714 PF feed sensor 2 stay jam PF conveying sensor 2 (PFPCS2) does not turn off

during paper feed from cassette 4 (Bulk paper

feeder).

4002 Registration sensor non

arrival jam

The registration sensor (RS) does not turn on dur-

ing paper feed from cassette 2.

4003 The registration sensor (RS) does not turn on dur-

ing paper feed from cassette 3.

4004 The registration sensor (RS) does not turn on dur-

ing paper feed from cassette 4.

4012 Registration sensor stay jam The registration sensor (RS) does not turn off dur-

ing paper feed from cassette 2.

4013 The registration sensor (RS) does not turn off dur-

ing paper feed from cassette 3.

4014 The registration sensor (RS) does not turn off dur-

ing paper feed from cassette 4.

4101 Fuser pre sensor non arrival

jam

The fuser pre sensor (FUPS) does not turn on dur-

ing paper feed from cassette 1.

4102 The fuser pre sensor (FUPS) does not turn on dur-

ing paper feed from cassette 2.

4103 The fuser pre sensor (FUPS) does not turn on dur-

ing paper feed from cassette 3.

4104 The fuser pre sensor (FUPS) does not turn on dur-

ing paper feed from cassette 4.

4108 The fuser pre sensor (FUPS) does not turn on dur-

ing paper feed from duplex section.

4109 The fuser pre sensor (FUPS) does not turn on dur-

ing paper feed from MP tray.

4111 Fuser pre sensor stay jam The fuser pre sensor (FUPS) does not turn off dur-

ing paper feed from cassette 1.

4112 The fuser pre sensor (FUPS) does not turn off dur-

ing paper feed from cassette 2.

4113 The fuser pre sensor (FUPS) does not turn off dur-

ing paper feed from cassette 3.

4114 The fuser pre sensor (FUPS) does not turn off dur-

ing paper feed from cassette 4.

4118 The fuser pre sensor (FUPS) does not turn off dur-

ing paper feed from the duplex section.

4119 The fuser pre sensor (FUPS) does not turn off dur-

ing paper feed from the MP tray.

Code Contents Conditions Jam

location*

*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).

2NP

1-4-7

4201 Eject sensor non arrival jam The eject sensor (ES) does not turn on during

paper feed from cassette 1.

4202 The eject sensor (ES) does not turn on during

paper feed from cassette 2.

4203 The eject sensor (ES) does not turn on during

paper feed from cassette 3.

4204 The eject sensor (ES) does not turn on during

paper feed from cassette 4.

4208 The eject sensor (ES) does not turn on during

paper feed from duplex section.

4209 The eject sensor (ES) does not turn on during

paper feed from MP tray.

4211 Eject sensor stay jam The eject sensor (ES) does not turn off during

paper feed from cassette 1.

4212 The eject sensor (ES) does not turn off during

paper feed from cassette 2.

4213 The eject sensor (ES) does not turn off during

paper feed from cassette 3.

4214 The eject sensor (ES) does not turn off during

paper feed from cassette 4.

4218 The eject sensor (ES) does not turn off during

paper feed from the duplex section.

4219 The eject sensor (ES) does not turn off during

paper feed from the MP tray.

4301 Duplex sensor non arrival

jam

The duplex sensor (DUS) does not turn on during

paper feed from cassette 1.

4302 The duplex sensor (DUS) does not turn on during

paper feed from cassette 2.

4303 The duplex sensor (DUS) does not turn on during

paper feed from cassette 3.

4304 The duplex sensor (DUS) does not turn on during

paper feed from cassette 4.

4309 The duplex sensor (DUS) does not turn on during

paper feed from the MP tray.

Code Contents Conditions Jam

location*

*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).

2NP

1-4-8

4311 Duplex sensor stay jam The duplex sensor (DUS) does not turn off during

paper feed from cassette 1.

4312 The duplex sensor (DUS) does not turn off during

paper feed from cassette 2.

4313 The duplex sensor (DUS) does not turn off during

paper feed from cassette 3.

4314 The duplex sensor (DUS) does not turn off during

paper feed from cassette 4.

4319 The duplex sensor (DUS) does not turn off during

paper feed from the MP tray.

4901 Bridge conveying sensor 1

non arrival jam

The bridge conveying sensor 1 (BRCS1) does not

turn on during paper feed from cassette 1.

4902 The bridge conveying sensor 1 (BRCS1) does not

turn on during paper feed from cassette 2.

4903 The bridge conveying sensor 1 (BRCS1) does not

turn on during paper feed from cassette 3.

4904 The bridge conveying sensor 1 (BRCS1) does not

turn on during paper feed from cassette 4.

4908 The bridge conveying sensor 1 (BRCS1) does not

turn on during paper feed from duplex section.

4909 The bridge conveying sensor 1 (BRCS1) does not

turn on during paper feed from the MP tray.

Code Contents Conditions Jam

location*

*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).

2NP

1-4-9

4911 Bridge conveying sensor 1

stay jam

The bridge conveying sensor 1 (BRCS1) does not

turn off during paper feed from cassette 1.

4912 The bridge conveying sensor 1 (BRCS1) does not

turn off during paper feed from cassette 2.

4913 The bridge conveying sensor 1 (BRCS1) does not

turn off during paper feed from cassette 3.

4914 The bridge conveying sensor 1 (BRCS1) does not

turn off during paper feed from cassette 4.

4918 The bridge conveying sensor 1 (BRCS1) does not

turn off during paper feed from duplex section.

4919 The bridge conveying sensor 1 (BRCS1) does not

turn off during paper feed from the MP tray.

5001 Bridge conveying sensor 3

non arrival jam

The bridge conveying sensor 3 (BRCS3) does not

turn on during paper feed from cassette 1.

5002 The bridge conveying sensor 3 (BRCS3) does not

turn on during paper feed from cassette 2.

5003 The bridge conveying sensor 3 (BRCS3) does not

turn on during paper feed from cassette 3.

5004 The bridge conveying sensor 3 (BRCS3) does not

turn on during paper feed from cassette 4.

5008 The bridge conveying sensor 3 (BRCS3) does not

turn on during paper feed from the duplex section.

5009 The bridge conveying sensor 3 (BRCS3) does not

turn on during paper feed from theMP tray.

5011 Bridge conveying sensor 3

stay jam

The bridge conveying sensor 3 (BRCS3) does not

turn off during paper feed from cassette 1.

5012 The bridge conveying sensor 3 (BRCS3) does not

turn off during paper feed from cassette 2.

5013 The bridge conveying sensor 3 (BRCS3) does not

turn off during paper feed from cassette 3.

5014 The bridge conveying sensor 3 (BRCS3) does not

turn off during paper feed from cassette 4.

5018 The bridge conveying sensor 3 (BRCS3) does not

turn off during paper feed from duplex section.

5019 The bridge conveying sensor 3 (BRCS3) does not

turn off during paper feed from the MP tray.

6001 DF paper entry error DF paper entry sensor (DFPES) turns on before

the eject signal is output from the machine (1000-

sheet finisher).

6021 DF front cover open DF front cover is opened during operation (1000-

sheet finisher).

Code Contents Conditions Jam

location*

*: Refer to figure 1-4-1 for paper jam location (see page 1-4-1).

Andere Handbücher für TASKalfa 2551ci

Inhaltsverzeichnis

Andere Kyocera Drucker Handbücher

Kyocera

Kyocera ECOSYS P8060cdn Bedienungsanleitung

Kyocera

Kyocera Ai3010 Bedienungsanleitung

Kyocera

Kyocera FS-5800C Bedienungsanleitung

Kyocera

Kyocera Copystar CS-2035 Bedienungsanleitung

Kyocera

Kyocera FS-9120DN Bedienungsanleitung

Kyocera

Kyocera MA2000w Bedienungsanleitung

Kyocera

Kyocera ECOSYS MA4500ifx Bedienungsanleitung

Kyocera

Kyocera FS-6020 Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-C5350DN Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-C5150DN Installations- und Betriebsanleitung

Kyocera

Kyocera ECOSYS FS-C8650DN Installations- und Betriebshandbuch

Kyocera

Kyocera ECOSYS M6026cdn Type B Bedienungsanleitung

Kyocera

Kyocera C8100DN - Color Laser Printer Bedienungsanleitung

Kyocera

Kyocera KM-4800w Leitfaden

Kyocera

Kyocera FS-2020D Bedienungsanleitung

Kyocera

Kyocera FS-C8026N Bedienungsanleitung

Kyocera

Kyocera KM-1650 Bedienungsanleitung

Kyocera

Kyocera FS-2100D Bedienungsanleitung

Kyocera

Kyocera FS-2000D Betriebsanleitung

Kyocera

Kyocera FS FS-1920 Bedienungsanleitung

Kyocera

Kyocera ECOSYS P5021cdn Bedienungsanleitung

Kyocera

Kyocera FS-C5015N Bedienungsanleitung

Kyocera

Kyocera FS FS-C8500DN Bedienungsanleitung

Kyocera

Kyocera ECOSYS FS-6950DN Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung