L’EPEE 1839 TIME MACHINE Bedienungsanleitung

TIME MACHINE

USER INSTRUCTIONS

CONGRATULATIONS

You have just acquired Time Machine, an advanced

mechanical movement timepiece from L’Epée 1839.

Time Machine was designed, developed and

manufactured with passion and care by L’Epée 1839’s

master watchmakers in Delémont, Switzerland.

IMPORTANT INFORMATION

The movement of Time Machine is protected by a glass tube/

capsule.

The clock should never be in contact with any liquids – even in

vaporized form. If it occurs, the clock should be serviced imme-

diately. Use only a soft and dry cloth to clean the clock. Dust

and particles contained in the cloth could scratch parts. Do not

use any kind of cleaning products to wipe the clock. It is recom-

mended to keep the clock distant from any source of heat or

vibrations. To preserve the longevity and functionality of Time Ma-

chine, do not permanently expose the clock to direct sunlight or

in a humid/dusty place.

A simple contact on certain pieces can generate delays in

timekeeping, which can only be solved by servicing. Fingerprints

will also damage the coating.

Our clocks are developed to ensure optimal accuracy and re-

liability. It is well accepted for a fine mechanical clock to have a

few seconds’ variation per day and our clocks are set so as not

to delay. However if you should notice a bigger variation, please

contact an authorized dealer who will advise you, or a L’Epée

1839 technical support center which will proceed with the ne-

cessary adjustment.

As for all Horological pieces of art, it is recommended to perio-

dically service your clock. A mechanical masterpiece requires

fine oils for the lubrication of the movement. These oils deterio-

rate over the years. We therefore advise having the movement

serviced every 3 to 5 years. Be aware that the optimal period

between servicing times can vary depending on the surrounding

environmental conditions.

It is recommended to handle Time Machine by the three legs, not

by the glass tube protecting the mechanism.

WINDING

THE MOVEMENT

SETTING

THE TIME

Front view

WINDING THE MOVEMENT

To wind the movement, use the turbine-shape winder (in

blue in the diagram) located at the right end of the glass

tube. Wear gloves and turn clockwise.

The movement should be fully wound every 8 days. Be

sure to wind up the spring completely. At the end of the

winding procedure, you will feel the necessary force in-

crease significantly; do not wind further as this is the sign

that the movement is fully wound.

SETTING THE TIME

Time setting is done with the left turbine-shape end of the

glass tube. Make sure you wear gloves to prevent from

any damages. Turn the rotative fin (in blue on the diagram)

to adjust time.

HOURS AND MINUTES DISPLAY

Hours and minutes are displayed by the central arrow.

Exemple :

11h 37

3H10

KINETIC SCULPTURE

The tube can rotate 360° both ways. Move gently.

The 3 legs of Time Machine do not move.

LOCK THE ROTATION

Turn the nut (in blue here) anti-clockwise to secure the ro-

tation and lock/stop the movement of the tube.

Top view

L’Epée 1839

Swiza Sa Manufacture

rue St-maurice 1

PO BOX 973

2800 Delémont

Switzerland

Customer Service:

Tel. +41 (0)32 421 94 05

Mail. [email protected]

www.lepee1839.ch

Inhaltsverzeichnis

Andere L’EPEE 1839 Uhr Handbücher

L’EPEE 1839

L’EPEE 1839 STARFLEET MACHINE Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 MELCHIOR Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 LE DUEL PERPETUEL TOURBILLON Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 requiem Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 Carriage Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 OCTOPOD Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 ORB Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 VANITAS Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung