La Crosse Technology BC700 Bedienungsanleitung

BATTERY CHARGER

Instruction Manual

BEFORE USING OUR BATTERY CHARGER, READ IN DETAILS ALL

INSTRUCTIONS CONTAINED IN THIS MANUAL. KEEP THIS MANUAL IN A

SAFE PLACE AS YOU MAY NEED TO USE IT AT ALATER DATE.

We draw the attention of all users of this device: please follow the safety

and maintenance instructions which are part of this manual. Also read the

caution markings on the charger, the manual, and the gift box.

INTRODUCTION:

Congratulations on purchasing this intelligent charging unit which enables definitely quick

and optimum charging to “AA” and “AAA” rechargeable batteries. With charging, discharging,

refreshing and capacity test functions as well as individual LCD displays for charging

compartments; this charging unit is reliable, user-friendly and ideal for use in the home,

office or on journey.

The Charging unit

CAUTIONS:

1. The charger is restricted to charging NiCd and NiMH rechargeable batteries only.

Never adopt this charger to other types of batteries such as alkaline, lithium, carbon

zinc or other types that are not specified.

2. The charging unit shall only be used only at normal indoor room conditions.

3. Always follow the charging instructions for the rechargeable battery. Observe the

recommended charging current of the rechargeable batteries. Never adopt a charging

current higher than recommended in the charging process.

4. Never use any power cable and transformer other than those originally supplied with

the charging unit.

5. The rechargeable batteries may become hot during charging (especially when high

charging current is chosen). User shall take extra care when taking out the batteries

after charging.

6. Unplug the charging unit from the power source when not in use.

FEATURES:

The Charging unit

zCharging the rechargeable battery in various current value (200, 500 or 700 mA)

zIndividual LCD display for compartments

zCharging both “AA” and “AAA” rechargeable batteries simultaneously

zOverheat detection to protect rechargeable batteries from over-charging

zMinus delta voltage (-dV) detection for charge termination

zDamaged batteries detection

zDischarge mode (first discharging and then charging) to remove memory effect of

rechargeable batteries

zRefreshing old rechargeable batteries by discharging/ charging cycles

zTest function to check the capacities of rechargeable batteries

zDifferent Charging/ Discharging functions can be launched independently and

simultaneously to each rechargeable battery in the compartments

zVarious display modes during charging/ discharging – the charging current (in mA),

time elapsed (in hh:mm), the terminal voltage (in V) and accumulated capacities (in

mAh or Ah)

INVENTORY OF CONTENTS

1. Charging unit

2. Transformer

3. Instruction Manual

FUNCTION KEYS:

There are three easy-to-use function keys and four number keys in the charging unit:

Compartment

Number keys

DISPLAY

MODE key

CURRENT key

Compartment Number key

Press and release the Number key to select a particular battery compartment for charge

modes and/or display mode adjustment.

MODE key

The mode key shall first be pressed and held for about 1 second to activate the mode

change. The subsequent pressing of the mode key will enable to toggle between the

“Charge”, “Discharge”, “Test” and “Refresh” mode.To change the operating mode for

individual rechargeable battery, first press corresponding NUMBER key then press the

MODE key.

DISPLAY key

Press and release to select the displays of the charging current (in mA), time elapsed (in

hh:mm), the terminal voltage (in V) and accumulated capacities (in mAh orAh) during the

charging or discharging process.

To change the display content of a particular rechargeable battery, first press corresponding

NUMBER key then press the DISPLAY key.

CURRENT key

Press to select the amount of current to be applied (within the first 8 seconds after batteries

are inserted) in different operating modes (also see “Start charging the rechargeable

batteries” below).

OPERATING MODES OF THE CHARGING UNIT

This powerful charging unit provides the following operating modes:

a. Charge up the rechargeable battery (CHARGE) – to charge up the rechargeable

battery, automatically switch to trickle charge after rechargeable battery is full.

b. Discharge then charge up the rechargeable battery (DISCHARGE) – to discharge the

rechargeable battery then charge it for minimizing the memory effect.

c. Refresh the rechargeable battery (REFRESH) – to refresh the rechargeable battery to

its maximum capacity by charging and discharging the rechargeable battery

repeatedly until no further increase in the capacity is estimated. For old rechargeable

batteries or those have not been used for a long times, refreshing may bring the

rechargeable battery back to the optimum condition.

d. Check the rechargeable battery capacity in mAh/ Ah (TEST)

CHARGE MODE

Charging at 200 mA is the default-operating mode of the charging unit. User may select a

charging current of 200, 500 or 700 mA.

The estimated time of charging by various charging current is tabulated in Table 1.

Table 1. Charging Time with various charging current

Size of battery Battery Capacity Charging current selected (mA) Estimated charging time

700 ~3 hr 35 min

500 ~5 hr

AA 2500 mAh 200 ~13 hr

700 ~60 min

500 ~84 min

AAA 700 mAh 200 ~3 hr 30 min

Note:

zUser shall always observe the recommended maximum charging current of the

rechargeable batteries. In general, 200 mA is a recommended charging current if

rapid charging is not necessary. It is definitely safe and optimum to the rechargeable

batteries.

zIt may be necessary to charge and discharge the new rechargeable batteries for

several times in the beginning before the optimum capacity of the rechargeable

batteries can be obtained. And user is recommended to adopt once the "Refresh"

mode to the new rechargeable batteries in order to achieve the optimum battery

capacity.

zWhen the transformer has been plugged to the power source, the version number of

the charger (for example “29” ) will be displayed first. Then all the segments will light

up momentarily and the “null” sign will be shown before batteries are placed. If

damaged batteries are placed to the charging unit, the charger will also show “null” on

LCD.

“null” displayed - No battery or damaged battery is

placed to the charging unit

START CHARGING THE RECHARGEABLE BATTERIES

Once a rechargeable battery is inserted after the transformer has been plugged to the power

source, the battery voltage (for example, “1.39V”) will be displayed for 4 seconds. Then “200

mA Charge” (default mode) will be shown on LCD for another 4 seconds, indicating that

charging with 200 mA is to be started if no alternation in setting is made.

Within this 8-second time from inserting the batteries the user may first select the

operating mode by the MODE key. Then within 8 seconds from the last key pressing,

user may select the charging/ discharging current by pressing the CURRENT key.

Note:

The mode key shall first be pressed and held for about 1 second to activate the mode

change. The subsequent pressing of the mode key will enable to toggle between the

“Charge”, “Discharge”, “Test” and “Refresh” mode.

There is a 8-second time allowed for choosing further functions after each key

pressing. If no more key is pressed, the LCD will blink one time to indicate the end of

setting. Afterward, the current can no longer be changed during the process and the

selected mode will be undergone.

Inhaltsverzeichnis

Andere La Crosse Technology Akkuladegerät Handbücher

La Crosse Technology

La Crosse Technology BC-1000U Bedienungsanleitung

La Crosse Technology

La Crosse Technology BC-9009U Bedienungsanleitung

La Crosse Technology

La Crosse Technology Battery Charger Bedienungsanleitung

La Crosse Technology

La Crosse Technology Battery Charger Bedienungsanleitung

La Crosse Technology

La Crosse Technology BC-500 Bedienungsanleitung

La Crosse Technology

La Crosse Technology RS250 Bedienungsanleitung

La Crosse Technology

La Crosse Technology BC-900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology RS-1000 Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA77932 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Battery Charger Bedienungsanleitung

La Crosse Technology

La Crosse Technology BC-700U Bedienungsanleitung

La Crosse Technology

La Crosse Technology BC-900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology RS-900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86224 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung