La Crosse Technology 513-1918S Bedienungsanleitung
SET UP GUIDE
MODEL: 513-1918S
ATOMIC DIGITAL WALL CLOCK
WITH INDOOR/OUTDOOR TEMPERATURE
1. Insert 2-AA batteries into your Temperature Sensor.
2. Insert 3-AAA batteries into your Atomic Clock.
3. Once the sensor is reading your Clock, place the sensor outside.
Watch our sensor mounting video: bit.ly/th_sensor_mounting
TH Sensor
TX191
Power Up
2
Atomic Clock
513-1918S
The buttons are located at the top of your clock.
Buttons
AAA
AAA
AAA
AA
AA
SNOOZE Press to exit Settings Menu.
When Alarm Sounds press to Snooze Alarm for 10 minutes.
ALARM Hold to enter Alarm Settings. Press to activate/deactivate alarm.
Alarm Icon will show when alarm is active.
SET Hold to enter the Settings Menu.
Press to change Date Display.
PLUS +
Hold to search for Outdoor Sensor.
Press to manually search for the WWVB Atomic Time Signal.
Settings Menu: Press to increase value. Hold to increase quickly.
MINUS Settings Menu: Press to decrease value. Hold to decrease quickly.
3
Settings Menu
1. Hold the SET button until the display changes to enter the Settings
Menu.
2. Press and release the +or -button to adjust values.
3. Press the SET button to confirm and move to next item.
Settings Menu Order:
• Language English | Spanish | French
• Beep ON | OFF
• Atomic ON | OFF
• Daylight Saving Time
- DST AUTO ON (Gain 1 hour in spring, lose 1 hour in fall)
- DST OFF (Remain in Standard Time all year long)
- DST ON (Remain in Daylight Saving Time all year long)
• Time Zone
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit | Celsius
Language: Whichever language is selected, the following instructions and
weekday will be presented in that language.
Atomic O: When Atomic O is selected, you will move directly to the Hour
setting.
Weekday: Weekday will set automatically when Year, Month and Date are
set.
TIME ZONES
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
4
Atomic Time
•Your Clock will automatically search for the Atomic Time Signal at UTC
7:00, 8:00, 9:00, 10:00, and 11:00.
•Press the PLUS (+) button to manually start or stop search for the WWVB
Atomic Time Signal.
•While searching, the Tower Icon will flash. The Tower Icon will be solid
when the WWVB Signal is received by your clock.
•For information about WWVB Atomic Time visit: bit.ly/atomic_time
TIME ALARM
Set Alarm:
1. Hold the ALARM button to enter the Alarm Settings Menu.
2. Press and release the + or - button to adjust the flashing values.
3. Press the ALARM button to confirm and move forward.
Press and release the SET button to change the Custom Date Display.
Custom Date Display
5
Activate/Deactivate Alarm:
The alarm is active when set.
Press and release the ALARM button to deactivate or activate the alarm.
The Alarm Time will show briefly.
The Alarm Icon will show only when alarm is active.
Silence a sounding alarm:
Press any button except SNOOZE to silence alarm for 24 hours.
Snooze:
When the alarm sounds, press the SNOOZE button to silence the alarm
for 10 minutes. The Alarm Icon will flash.
Note: The alarm will sound with increasing frequency for two minutes,
then shut off completely if not deactivated.
Search for Sensors
If you are seeing “NO” or dashes for any sensor readings, please try the
following steps:
1. Hold the PLUS (+) button to search for all sensors.
The Reception Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next
to the display and remove power from the sensor and station.
3. Press any button on the station 20 times and leave the parts sit for a few
moments with the power o.
4. Install a new set of alkaline batteries into the sensor, then power up your
station again.
5. If your sensor data is still not appearing after these steps, please contact our
support sta. For additional help visit: bit.ly/basic_restart
6
Sensor Placement & Mounting
For Accurate Temperature/Humidity Measurements
•Insert a mounting screw through the hole at the top to securely mount
the sensor. It can also hang from the back using a nail.
•Mount the sensor vertically in a protected well-shaded area. Keeping
it out of direct weather elements such as sunlight, rain, snow, etc. will
help avoid inaccurate readings.
•For additional protection against weather elements, a Sensor Weather
Shield: bit.ly/weather-shield can be purchased separately.
•The maximum wireless transmission range to the station is up to 330ft
(100m) in open air. This does not include walls, floors, or other large
obstructions.
•For online video instructions, visit: bit.ly/th_sensor_mounting
Low Battery Icons
Low Battery Icon by the Time, replace batteries in the Clock.
Low Battery Icon by Outdoor Temperature, replace batteries in the Outdoor
Sensor.
• The Sensor Weather Shield is designed to protect your outdoor
sensor from rain and snow.
• This shield will oer limited protection from the sun’s heat.
• Optional purchase at: bit.ly/weather-shield
*Not included
Sensor Weather Shield
7
Atomic Clock (513-1918S)
Temperature Range: 32ºF to 122ºF (0ºC to 50ºC)
Update Interval: About every 30 seconds
Power: 3-AA, IEC, LR3 batteries (not included)
Battery Life: Over 18 months
Dimensions: 8.97” W x 0.94” D x 7.12” H (22.78cm W x 2.38cm D x 18.08cm H)
Specifications
Temp. Sensor (TX191)
Temperature Range: -40°F to 140°F (-40°C to 60°C)
Transmission Range: Over 330 feet (100 meters) in
open air RF 433MHz
Update Interval: About every 51 seconds
Power: 2-AA, IEC, LR6 batteries (not included)
Battery Life: Over 18 months
Dimensions: 1.57” W x 0.95” D x 4.49” H
(3.98 L x 2.41 W x 11.40 H cm)
3.13”
7.95cm
0.94”
2.38cm
8.97”
22.78cm
7.12”
18.08cm
4.99”
12.67cm
0.95”
2.41cm
1.57”
3.98cm
4.49”
11.40cm
8
If you require additional assistance, get in touch with our
friendly customer support team based in La Crosse, WI.
Self Help: bit.ly/513-1918s_support
Online: bit.ly/contact_techsupport
Phone: 1.608.782.1610
Our knowledgable customer support team is available:
Mon-Fri 8am-6pm CST
We’re Here to Help SCAN HERE
Additional Info
and Support
Ask questions, watch setup videos, and provide feedback on our social media
outlets. Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram.
Stay in Touch!
Warranty & Patents
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing defects in materials
& workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty
Patents: www.lacrossetechnology.com/pages/patents
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC0601323
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic,
mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints.
The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any
responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this
equipment. Such changes or modifications could void the user authority to operate the equipment.
FCC Statement
Care & Maintenance
When batteries of dierent brand or type are used together, or new and old batteries are used together, some batteries may
be over-discharged due to a dierence of voltage or capacity. This can result in venting, leakage, and rupture and may cause
personal injury.
•Do not mix Alkaline, Lithium, standard, or rechargeable battteries.
•Always purchase the correct size and grade of battery most suitable for the intended use.
•Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of dierent
types.
•Clean the battery contacts and also those of the device prior to battery installation.
•Ensure the batteries are installed correctly with regard to polarity (+ and -).
•Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this
product.
•Remove used batteries promptly.
•For recycling and disposal of batteries, and to protect the environment, please check the internet or your local phone
directory for local recycling centers and/or follow local government regulations.
09
This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information, go to:
www.P65Warnings.gov
CA WARNING:
Andere Handbücher für 513-1918S
5
Inhaltsverzeichnis
Andere La Crosse Technology Uhr Handbücher
La Crosse Technology
La Crosse Technology WT-8002U Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-3181 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-3129B Abmessungen
La Crosse Technology
La Crosse Technology C86224 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 513-1419-WA Abmessungen
La Crosse Technology
La Crosse Technology WT-3181PL 1 Series Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-8017U-MAH Bedienungsanleitung
La Crosse Technology
La Crosse Technology 403-3246BR Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-6118AL-IT Bedienungsanleitung
La Crosse Technology
La Crosse Technology 404-1235UA-SS Bedienungsanleitung
La Crosse Technology
La Crosse Technology 513-1417CH Bedienungsanleitung
La Crosse Technology
La Crosse Technology W86111V2 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 515-1419 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 404-3036BW Bedienungsanleitung
La Crosse Technology
La Crosse Technology Clock Bedienungsanleitung
La Crosse Technology
La Crosse Technology BBB87740 Bedienungsanleitung
La Crosse Technology
La Crosse Technology BBB85289 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-8115U Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-3144S Bedienungsanleitung
La Crosse Technology
La Crosse Technology W85961 Bedienungsanleitung
Beliebte Uhr Handbücher anderer Marken
Silicon Laboratories
Silicon Laboratories SI5324 Bedienungsanleitung
Heathkit
Heathkit GC-1005 Bedienungsanleitung
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Bedienungsanleitung
Andrew O'Malley
Andrew O'Malley DOTKLOK Bedienungsanleitung
ALGE-Timing
ALGE-Timing ASC3 Bedienungsanleitung
Bodet
Bodet Profil 960 Bedienungsanleitung
