La Crosse Technology 513-1919 Bedienungsanleitung

ATOMIC DIGITAL CLOCK 1 | PAGE

ATOMIC DIGITAL WALL CLOCK

INSTRUCTION MANUAL

MODEL: 5131919

DC: 102919

ATOMIC DIGITAL CLOCK 2 | PAGE

TABLE OF CONTENTS

3. Power Up

3. Custom Date Display

3. Indoor Comfort Statement

4. LCD Features

5. Settings Menu

6. Atomic Time

7. Time Alarm

•Set Alarm

•Activate/Deactivate Alarm

•Snooze Alarm

7. Indoor/Outdoor Temperature

8. Temperature Trend Arrow

8. Outdoor Sensor Reception

8. Factory Restart

8. Low Battery Indicators

8. Sensor Weather Shield

9. We’re Here to Help!

79 Join the Conversation

9. Speciﬁcations

10. Care and Maintenance

10. Warranty Info

10. FCC Statement

ATOMIC DIGITAL CLOCK 3 | PAGE

POWER UP

1. Insert 2-AA batteries into your Outdoor Sensor.

2. Insert 2-AA batteries into your Digital Clock.

3. Once the Outdoor Sensor is reading to your clock, place it outside in a shaded location to protect it from

the sun’s heat.

Watch sensor mounting video: bit.ly/TH_SensorMounting

Outdoor Sensor

TX191

Digital Clock

513-1918B

CUSTOM DATE DISPLAY

This versatile clock allows you to display outdoor temperature or seconds counting in the outdoor

temperature area. Press the + button to toggle between outdoor temperature, or seconds. Clock will stay

on the selected option.

INDOOR COMFORT STATEMENT

• The indoor comfort indicator tells you at a glance if the humidity level in your home is humid, comfortable

or dry.

• With this indicator you can decide to add or remove humidity for optimal comfort.

HUMID

GOOD

COMFORT

DRY

ATOMIC DIGITAL CLOCK 4 | PAGE

Atomic Time

AM/PM Indicator

Outdoor Temperature Trend

Indoor Humidity

Indoor Temperature

Atomic Signal Reception Tower

Alarm Icon

Snooze Icon

Low Battery Icon (Clock)

Weekday

Buttons (on back)

Sensor Reception Strength

Indoor Comfort Statement

Month/Date

Outdoor Temp or Seconds

SET + - ALARM SNOOZE

8910 11

12 13 14 15

LCD FEATURES

ATOMIC DIGITAL CLOCK 5 | PAGE

SETTINGS

1. Hold the SET button to enter the Settings Menu.

2. Use the + or - button to adjust values.

3. Press the SET button to confirm and move to next item.

4, Press the SNOOZE button at anytime to exit.

Settings Menu Order:

• Beep ON | OFF

• Atomic ON | OFF

• Daylight Saving Time ON | OFF

• Time Zone

• 12/24 Hour Time

• Hour

• Minutes

• Year

• Month

• Date

• Fahrenheit | Celsius

Atomic OFF: When OFF is selected the next step will be the Hour setting.

Weekday: Weekday will set automatically when Year, Month and Date are set.

TIME ZONES

AST = Atlantic

EST = Eastern

CST = Central

MST = Mountain

PST = Paciﬁc

AKT = Alaska

HAT = Hawaii

BEEP SOUND ON/OFF ATOMIC TIME SIGNAL ON/OFF DAYLIGHT SAVING TIME

TIME ZONE 12/24 HOUR TIME

COMFORT COMFORT COMFORT

COMFORT COMFORT

ATOMIC DIGITAL CLOCK 6 | PAGE

HOUR MINUTES YEAR

MONTH DATE FAHRENHEIT/CELSIUS

COMFORT COMFORT COMFORT

ATOMIC TIME

• Your Clock will automatically search for the Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.

• Press the SET button to manually start or stop search for the WWVB Atomic Time Signal.

• While searching, the Tower Icon will ﬂash. The Tower Icon will be solid when the WWVB Signal is

received by your clock.

• Please be sure you have selected your time zone from the list in the Settings menu. When the Atomic time

signal is received, the clock will set to the time zone selected. Default is Eastern time.

• For information about WWVB Atomic Time visit: bit.ly/AtomicTime

ATOMIC DIGITAL CLOCK 7 | PAGE

TIME ALARM

Set Time Alarm

1. Hold the ALARM button 2 seconds to enter settings mode.

2. Press the + or - button to adjust the ﬂashing values. Hold the + or - buttons to adjust quickly.

4. Press the ALARM button to conﬁrm adjustments and move to the next item.

5. Press the SNOOZE button at any time to exit.

Activate/Deactivate Time Alarm

• The alarm is active when set.

• From normal time display, press and release the ALARM button to deactivate or activate the alarm. The

alarm time will show for 2 seconds.

• Alarm icon will show then active.

Snooze Alarm

• When alarm sounds, press the SNOOZE button to silence alarm for 10 minutes.

• The snooze icon Zz will ﬂash

• Press any button except SNOOZE to silence the alarm for 24 hours

COMFORT COMFORT

• Indoor and outdoor temperature and humidity are displayed in the lower section of the clock.

• Select Fahrenheit or Celsius in the Settings menu.

• Temperature trend arrows track temperature over the past 3 hours.

• The outdoor sensor reception signal indicates the connection strength between sensor and clock.

Temperature/Humidity Temperature

Trend

Arrows

INDOOR/ OUTDOOR TEMPERATURE

ATOMIC DIGITAL CLOCK 8 | PAGE

The outdoor temperature (2°F / 1°C) trend indicators update every 30 minutes or less. This provides a 3 hour

comparison which changes on every ½ hour:

Example: At 3:00 - compare to 12:00 data; at 3:30 -compare to 12:30 ….. etc.

Temperature rose over

the past 3 hours

Temperature is unchanged

over the past 3 hours

Temperature fell over

the past 3 hours

TEMPERATURE TREND ARROWS

OUTDOOR SENSOR RECEPTION

• Hold the - button 3 seconds to search for the sensor.

• The strength signal icon will ﬂash until the sensor signal is received or for 3 minutes if no signal is

available.

• The signal will show solid when connected to the sensor.

When the outdoor readings show dashes and searching for the sensor has not helped, complete a full

restart:

1. Bring the sensor in the house about ﬁve feet from the clock.

2. Remove batteries from the sensor, and from the clock

3. Press any button 20 times.

4. After 15 minutes, insert batteries into the sensor, and into the clock.

5. Wait another 15 minutes to establish a strong connection. Place sensor outside in shaded location.

FACTORY RESTART

SENSOR WEATHER SHIELD

• The Sensor Weather Shield (sold separately) is designed to protect your outdoor sensor

from rain and snow.

• This shield will oer limited protection from the sun’s heat.

• Optional purchase at: bit.ly/925-1418

LOW BATTERY INDICATORS

• A Low Battery Indicator by the time means you need to replace the batteries in your station.

ATOMIC DIGITAL CLOCK 9 | PAGE

If you require additional support, get in touch with our friendly customer support team based out of La

Crosse, WI.

Phone: 1-608-782-1610

Online: bit.ly/contact_techsupport

Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.

WE’RE HERE TO HELP!

JOIN THE CONVERSATION

Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!

SPECIFICATIONS

Indoor Temp Range: 32°F to 99°F (0°C to 37°C)

When above 99F(37C), the indoor temperature will display “HI”

When below 32F(0C), the indoor temperature will display “LO”

Indoor Humidity Range: 10% to 99% RH

Outdoor Temp Range: -40°F to 140°F (-40°C to 60°C)

Distance: Over 330 ft. (100 meters) RF 433MHz (open air)

Power Clock: 2-AA, IEC, LR6 batteries (not included)

Power TX191: 2-AA, IEC, LR6 batteries (not included)

Battery Life Clock: over 18 months with reputable batteries

Battery Life TX191: over 12 months with reputable batteries

Dimensions Clock: 9.51” W x 7.51” T x 1.0” D (24.16cm W x 19.08cm T x 2.54cm D)

Dimensions TX191: 1.57” W x 4.49” T x 0.94” D (3.98cm W x 11.40cm T x 2.39cm D)

ATOMIC DIGITAL CLOCK 10 | PAGE

FCC STATEMENT

WARRANTY INFO

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to

manufacturing defects in materials & workmanship.

La Crosse Technology, Ltd.

2830 S. 26th St.

La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/support

CARE + MAINTENANCE

•Do not mix old and new batteries.

•Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

•Always purchase the correct size and grade of battery most suitable for intended use.

•Clean the battery contacts and also those of the device prior to battery installation.

•Ensure the batteries have with correct polarity (+ / -).

•Remove batteries from equipment that will not to be used for an extended period.

•Promptly remove expired batteries.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

CAUTION!

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment.

mechanical or chemical process without the written permission

of the publisher.

This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in

subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks

and patents are recognized.

WARNING: This product can expose you to chemicals including styrene, which is known to the State of

California to cause cancer. For more information go to: www.P65Warnings.ca.gov

Andere Handbücher für 513-1919

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere La Crosse Technology Uhr Handbücher

La Crosse Technology

La Crosse Technology 513-1417CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-3229A Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology WT-3161BK Bedienungsanleitung

La Crosse Technology

La Crosse Technology 513-1211 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 012721 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 513-1918S Bedienungsanleitung

La Crosse Technology

La Crosse Technology 817-2410 Abmessungen

La Crosse Technology

La Crosse Technology WS-8001UM Bedienungsanleitung

La Crosse Technology

La Crosse Technology 513-1918S Bedienungsanleitung

La Crosse Technology

La Crosse Technology 513-1417BS Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8007CTWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-3129S Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-3181 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86279v4 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8120U Bedienungsanleitung

La Crosse Technology

La Crosse Technology BBB84022 Abmessungen

La Crosse Technology

La Crosse Technology 513-1417v4 Abmessungen

La Crosse Technology

La Crosse Technology WT-3181PX1 Abmessungen

La Crosse Technology

La Crosse Technology WT-3181PLQ Abmessungen

La Crosse Technology

La Crosse Technology 515-1419 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-3181 Bedienungsanleitung

La Crosse Technology

La Crosse Technology BBB87733 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WT-3161BL Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

Sharp

Sharp SPC900 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung

LG LEC-005 Bedienungsanleitung

IKEA

IKEA ROTBLÖTA Bedienungsanleitung

U-Line

U-Line Н-2811 Bedienungsanleitung

Digiview

Digiview RC305EL Bedienungsanleitung