La Crosse Technology WS-8117U-IT Bedienungsanleitung
WS-8117U-IT www.lacrossetechnology.com/support Page | 1
Model: WS-8117U-IT
Instruction Manual
DC: 041916
ATOMIC DIGITAL CLOCK
WITH MOON PHASE
Foldout Stand
Buttons
Time, Alarm, +
WWVB Icon
Indoor Temp.,
Weekday, Date,
Moon Phase, +
Outdoor Temp.
Two AA
Batteries
SET + ALM SNZ
WS-8117U-IT www.lacrossetechnology.com/support Page | 2
Get Started
1: Insert 2 fresh AA, batteries into the TX37U-IT sensor. Observe correct
polarity.
2: Insert 2 fresh AA, batteries into the atomic clock Observe correct
polarity.
3: Set time, time zone, etc.
4: After 5 minutes place sensor outside in a shaded location.
Restart: If the outdoor temperature shows dashes, remove
batteries from the station & outdoor sensor. Press any button on
the station 20 times. After 15 minutes, return to Step 1.
Set Time, Date, 12/24 Hour, and Temperature Units
1. Press the SET button to enter time set mode, confirm adjustments
and move to next item.
2. Press the +button to adjust values.
Settings order:
1. Time Zone
2. Daylight Saving Indicator
3. Language
4. Hour
5. Minutes
6. Year (2 digit)
7. Month
8. Date
9. Weekday
10. 12/24 Hour Format
11. Fahrenheit/Celsius
Press SET to exit, or wait 30 seconds without pressing buttons to return
to the normal time display.
Set Alarm Time
1. Hold ALM to enter ALM set mode.
2. Press +to adjust values.
3. Press ALM to confirm adjustments and move to next item.
Setting order: 1. Hour, 2. Minutes
Press ALM to exit, or wait 30 seconds without pressing buttons to return
to the normal time display.
This clock has time zones
from GMT 0 to +/-12h
North American time zones
-4
ATL
Atlantic
-5
EST
Eastern (default)
-6
CST
Central
-7
MST
Mountain
-8
PST
Pacific
-9
ALA
Alaska
-10
HAW
Hawaiian
Languages
US
English
F
French
E
Spanish
d
German
WS-8117U-IT www.lacrossetechnology.com/support Page | 3
Deactivate/Activate ALM
•Press ALM once to deactivate the alarm.
•The alarm icon will disappear.
•Press ALM once to activate the alarm.
•The alarm icon will appear.
Snooze
•Press SNZto silence an active alarm for 10 minutes.
•The alarm icon will flash.
Press any button to stop the alarm for 24 hours.
Display Features
There are four display modes to view the day, seconds, and
temperatures. If seconds are counting up on the clock, press the +
button to move or remove this feature.
Default display: month&date/weekday/indoor temperature /outdoor
temperature.
Change the display:
1. Press the +button. The display should now show the
month&date/weekday/seconds/outdoor temperature.
2. Press the +button a second time and the display will show the
month&date/weekday/indoor temperature/seconds.
3. Press the +button a third time and the display will show the
month&date/seconds/indoor temperature/outdoor temperature.
Press the +button a fourth time and the display will return to the default
display.
WWVB Radio-controlled Time
•WWVB Icon will flash when searching.
•The WWVB icon will be steady when time signal is
received in the past 24 hours.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The atomic clock will search for 1 hour between midnight and 6am until
the WWVB time signal is received. After reception, the atomic clock will
only search for the atomic signal after midnight.
WWVB
Atomic Icon
WS-8117U-IT www.lacrossetechnology.com/support Page | 4
Low
Battery
Icons
Moon Phase
The LCD Moon phase is divided by 6 sections, showing a total of 12
phases of the moon.
Note: With the moon shown against a light colored background, the
phases will show opposite to a paper calendar. The segments that are
highlighted will portray the part of the moon that is lit. For instance, the
moon will be blank during a new moon and dark during a full moon.
Low Battery Icon
•When the TX icon is displayed replace batteries in the outdoor
sensor.
•When the RX icon is displayed replace batteries in the atomic clock.
Position Outdoor Sensor
•Mount the outdoor sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
•The maximum transmitting range to the atomic clock is over 330 feet
(100 meters) in open air, not including walls.
Care and Maintenance
•Do not mix old and new batteries
•Do not mix Alkaline, Standard, Lithium, or Rechargeable Batteries
•Always purchase the correct size and grade of battery most suitable for the
intended use.
•Replace all batteries of a set at the same time.
•Clean the battery contacts and also those of the device prior to battery
installation.
•Ensure the batteries are installed with regard to polarity (+ and -).
•Remove batteries from equipment which is not to be used for an extended
period of time.
•Promptly remove expired batteries.
WS-8117U-IT www.lacrossetechnology.com/support Page | 5
Specifications
Indoor
Temperature Range
14.1°F to +100°F
-9.9ºC to +37.8ºC
Outdoor
Temperature Range
-39.8°F to +139.8°F
-39.8ºC to +59.9ºC
Distance
Over 330 ft. (100 meters)
RF 915MHz (open air)
Interval
About every 4 seconds
Power
Atomic Clock
2-AA, IEC, LR6 batteries
(not included)
TX37U-IT Sensor
2-AA, IEC, LR6 batteries
(not included)
Battery Life
Atomic Clock
Over 24 months
TX37U-IT Sensor
Over 12 months
Dimensions
Atomic Clock
12.20“ x 1.18“ x 8.03“
(310 x 30 x 204mm)
TX37U-IT Sensor 5.05” x 1.50” x 0.83”
(128.3 x 38.2 x 21.2 mm)
Warranty and Support Information
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of
purchase) on this product relating to manufacturing defects in materials &
workmanship.
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
For warranty work, technical support or other information contact our
friendly support staff:
La Crosse Technology, Ltd
2830 26th Street S.
La Crosse, WI 54601
Contact Support: 1-608-782-1610
Product Registration:
www.lacrossetechnology.com/support/register
Online Product Support:
www.lacrossetechnology.com/support
WS-8117U-IT www.lacrossetechnology.com/support Page | 6
Protected under U.S. Patents:
5,978,738 | 6,076,044 | RE43903
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy, and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized changes or modifications to this equipment. Such
changes or modifications could void the user authority to operate the
equipment.
All rights reserved. This manual may not be reproduced in any form, even
in part, or duplicated or processed using electronic, mechanical or chemical
process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is
regularly checked and corrections are included in subsequent editions. We
disclaim any responsibility for any technical error or printing error, or their
consequences. All trademarks and patents are recognized.
Canada Statement
This device complies with CNR Industry Canada license -exempt devices.
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
Andere Handbücher für WS-8117U-IT
3
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere La Crosse Technology Uhr Handbücher
La Crosse Technology
La Crosse Technology WT-3102 Abmessungen
La Crosse Technology
La Crosse Technology WT-3181P Bedienungsanleitung
La Crosse Technology
La Crosse Technology 513-63867v2 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 515-1912 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 433-3833 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-8119U Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-8002U Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-6002U Bedienungsanleitung
La Crosse Technology
La Crosse Technology Landshark Bedienungsanleitung
La Crosse Technology
La Crosse Technology 513-1417ALv4 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-3129B Bedienungsanleitung
La Crosse Technology
La Crosse Technology WT-8008U Bedienungsanleitung
La Crosse Technology
La Crosse Technology 513-1918S Bedienungsanleitung
La Crosse Technology
La Crosse Technology 404-3840FL Bedienungsanleitung
La Crosse Technology
La Crosse Technology 404-3036BW Bedienungsanleitung
La Crosse Technology
La Crosse Technology 513-1429BL Abmessungen
La Crosse Technology
La Crosse Technology 404-1246 Bedienungsanleitung
La Crosse Technology
La Crosse Technology 83247-BHG Bedienungsanleitung
La Crosse Technology
La Crosse Technology C86279V3 Bedienungsanleitung
La Crosse Technology
La Crosse Technology WS-8157U-A Bedienungsanleitung
Beliebte Uhr Handbücher anderer Marken
Silicon Laboratories
Silicon Laboratories SI5324 Bedienungsanleitung
Heathkit
Heathkit GC-1005 Bedienungsanleitung
Oregon Scientific
Oregon Scientific PRYSMA RMR221P Bedienungsanleitung
Andrew O'Malley
Andrew O'Malley DOTKLOK Bedienungsanleitung
ALGE-Timing
ALGE-Timing ASC3 Bedienungsanleitung
Bodet
Bodet Profil 960 Bedienungsanleitung
