This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Increase separation between equipment & receiver.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized changes or modifications to this equipment. Such changes or
modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part,
or duplicated or processed using electronic, mechanical or chemical process
without the written permission of the publisher. This booklet may contain errors
or misprints. The information it contains is regularly checked and corrections are
included in subsequent editions. We disclaim any responsibility for any technical
error or printing error, or their consequences. All trademarks and patents are
recognized.
FCC STATEMENT
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing
defects in materials & workmanship.
For Full Warranty Details, Visit:
www.lacrossetechnology.com/support
CARE + MAINTENANCE
· Do not mix old and new batteries.
· Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
· Always purchase the correct size and grade of battery most suitable
for intended use.
· Clean the battery contacts and also those of the device prior to
battery installation.
· Ensure the batteries have with correct polarity (+ / -).
· Remove batteries from equipment that will not to be used for an
extended period.
· Promptly remove expired batteries.
CANADA STATEMENT
This device complies with CNR Industry Canada license -exempt devices.
Operation is subject to the following two conditions:
(1 ) This device may not cause interference; and
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
Our knowledgeable customer support team is available: Monday-
Friday, 8am-6pm CST.
Phone: 1.608.782.1610
WE’RE HERE TO HELP!
SPECIFICATIONS
Indoor:
Temperature Range: 32°F to 122°F (0°C to 50°C)
Power:
Digital Clock: 1-AA, IEC, LR6 batteries
(not included)
Battery Life:
Digital Clock: Up to 24 months
Dimensions:
Digital Clock: 8.62” L x 1.29” W x 6.81” H
(21.89 x 3.27 x 17.29 cm)
Page | 6 Page | 7 Page | 8Page | 5
Ask questions, watch detailed setup videos, and provide feedback
on our social media outlets!
JOIN THE CONVERSATION
POSITIONING YOUR CLOCK
• Use the Mounting Hole on the back for placement on a wall.
• Or use the Pull Out Stand on the back of the clock to freely
position it on a table or desk.
WARNING: This product can expose you to chemicals including
styrene, which is known in the State of California to cause cancer.
For more information go to: www.P65Warnings.ca.gov
