La Crosse Technology 513-75624 Bedienungsanleitung

SET UP GUIDE

MODEL: 513-75624

Atomic Digital Wall Clock

1. Insert 2-AA batteries into your Outdoor Sensor.

2. Insert 2-AA batteries into your Atomic Clock.

3. Enter the Settings Menu to adjust your time and date.

4. Once the sensor is reading to your clock, place the senor outside in a

shaded location. View our sensor mounting video here:

bit.ly/th_sensor_mounting

• The clock will automatically search for the Atomic Time Signal two hours

after power up and at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.

• The Atomic Time Signal Icon will ﬂash while searching and be solid

when it has connected.

• From the normal time display, press the SET button to manually start

or stop a search for the WWVB time signal. For information about WWVB

visit: bit.ly/AtomicTime.

Power Up

Atomic Time

Outdoor Sensor

TX141v3

Atomic Clock

513-75624

Settings Menu

1. Hold the SET button to enter the Settings Menu.

2. Use the +/- buttons to adjust values.

3. Press SET to conﬁrm values.

4. Press the SNOOZE button at any time to save and exit.

Settings Menu Order:

• Language (English, Spanish, French)

• Beep ON/OFF

• Atomic ON/OFF

• DST ON AUTOMATIC/ DST ALWAYS OFF / DST ALWAYS ON

(Change Spring/Fall) (Standard Time all year) (DST all year)

• Time Zone

• 12/24 Hour Format

• Hour

• Minutes

• Year

• Month

• Date

• Fahrenheit/Celsius

Language: The language selected will adjust the weekday and month

readouts as well as other menu items.

Atomic OFF: When selected, the menu will skip DST and Time Zone settings

and move straight to the 12/24 Hour setting.

Weekday: Sets automatically when Year, Month and Date are set.

TIME ZONE

ATLANTIC

EASTERN

CENTRAL

MOUNTAIN

PACIFIC

ALASKA

HAWAII

Time Alarm

Set Alarm:

1. Hold the ALARM button to enter the Alarm Settings.

2. Use the +/- buttons to adjust values.

3. Press the ALARM button to confirm and move to the next item.

Alarm Hour Alarm OFFAlarm ONAlarm Minutes

Silence a sounding alarm:

Press any button except SNOOZE to silence the alarm for 24 hours.

Activate/Deactivate Alarm:

• Press the ALARM button to activate or deactivate the alarm.

• The Alarm Icon will show when alarm is active.

Snooze:

• When the alarm sounds, press the SNOOZE button to silence

the alarm for 10 minutes. Zz will show.

Note: The alarm will sound with increasing frequency for two minutes,

then shut off automatically if not silenced.

Both the Indoor and Outdoor Temperature have Trend Arrows to indicate

temperature changes (2°F / 1°C) over the past one hour period.

Temperature has risen over the past hour.

Temperature has been steady over the past hour.

Temperature has fallen over the past hour.

The moon phase is based on the Lunar Calendar and the year, month, and

date settings.

Moon Phase

Full Moon

New Moon

Small Waning

Crescent

Large Waxing

Gibbous

Large Waning

Crescent

Small Waxing

Gibbous

Last Quarter

First Quarter

Small Waning

Gibbous

Large Waxing

Crescent

Large Waning

Gibbous

Small Waxing

Crescent

Temperature

Temperature Trend Arrows:

Temperature

Sensor Connected Search for SensorSensor Not Connected

If you are seeing NO or dashes for your outdoor readings, please try the

following steps:

1. Hold the +button to search for your outdoor sensor. The Reception

Indicator will begin to animate.

2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside

next to the display and remove power from both the sensor and clock.

3. Press any button on the clock 20 times and leave the parts sit for a few

moments with the power o.

4. Install a new set of alkaline batteries into the sensor, then into your clock.

For additional help visit: bit.ly/basic_restart

5. If your outdoor data is still not appearing after these steps, please

contact our support sta via the link below.

If you require additional assistance, get in touch with our friendly customer

support team based in La Crosse, WI.

Phone: 1.608.782.1610

Online: bit.ly/contact_techsupport

Our knowledgable customer support team is available:

Mon-Fri 8am-6pm CST

We’re Here to Help

Low Battery Indicator

By the Time, replace clock batteries.

By the Outdoor Temperature, replace sensor batteries.

Stay in Touch

Follow La Crosse Technology on YouTube, Twitter, Facebook and Instagram.

Ask questions, watch setup videos, and provide feedback on our social

media outlets.

Care + Maintanence

Do not mix old and new batteries.

Do not mix Alkaline, Lithium, standard, or

rechargeable batteries.

Always purchase the correct size and grade

of battery most suitable for intended use.

Clean the battery contacts and also those of

the device prior to battery installation.

Ensure the batteries have been installed

with correct polarity (+/-).

Remove batteries from equipment that will

not to be used for an extended period.

Promptly remove expired batteries.

Speciﬁcations

Atomic Clock (513-75624)

Temperature Range:

32°F to 99°F (0°C to 37°C)

Power Requirements:

2-AA, IEC, LR6 batteries (not included)

Battery Life: Over 12 months

Dimensions:

11” W x 1.1” D x 8.54” H

(27.9 cm x 2.8 cm x 21.7 cm)

Outdoor Sensor (TX141v3)

Temperature Range:

-40°F to 140°F (-40°C to 60°C)

Transmission Range: Over 330 ft. open air

(100 meters) RF 433MHz

Update Interval: About every 51 seconds

Power: 2-AA, IEC, LR6 batteries (not included)

Battery Life: Over 24 months

Dimensions:

1.57” L x 0.79” W x 5.12” H

(4.0cm L x 2.0cm W x 13.0 H cm)

Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC 072721

Warranty Info

La Crosse Technology, Ltd. provides a 1-year

limited time warranty (from date of purchase) on

this product relating to manufacturing defects in

materials & workmanship.

La Crosse Technology, Ltd,

2830 S. 26th St.

La Crosse, WI 54601

For Full Warranty Details, Visit:

www.lacrossetechnology.com/pages/warranty

This product can expose you to chemicals including

styrene, which is known in the State of California to

cause cancer.

For more information, go to:

www.P65Warnings.ca.gov

WARNING:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment o and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

receiver.

Connect the equipment into an outlet on a circuit dierent

from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician

for help.

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Caution!

Any changes or modiﬁcations not expressly approved by

the party responsible for compliance could void the user’s

authority to operate the equipment.

in any form, even in part, or duplicated or processed using

electronic, mechanical or chemical process without the

written permission of the publisher.

This booklet may contain errors or misprints. The information

it contains is regularly checked and corrections are included

in subsequent editions. We disclaim any responsibility for

any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

FCC Statment Canada Statment

This device contains licence-exempt transmitter(s)/receiver(s)

that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

L’émetteur/récepteur exempt de licence contenu dans

le présent appareil est conforme aux CNR d’Innovation,

Sciences et Développement économique Canada

applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes :

1) L’appareil ne doit pas produire de brouillage;

2) L’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

Inhaltsverzeichnis

Andere La Crosse Technology Zeiterfassung Handbücher

La Crosse Technology

La Crosse Technology WT-3129Sx1 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 617-1392B Abmessungen

La Crosse Technology

La Crosse Technology 433-3256B Bedienungsanleitung

La Crosse Technology

La Crosse Technology L73859 Bedienungsanleitung

La Crosse Technology

La Crosse Technology BBB86118 Abmessungen

La Crosse Technology

La Crosse Technology WT-3126Bx1 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WT-3102S Bedienungsanleitung

La Crosse Technology

La Crosse Technology 513-05867 Abmessungen

La Crosse Technology

La Crosse Technology 513-21867 Abmessungen

La Crosse Technology

La Crosse Technology WT-3161WHx1 Bedienungsanleitung

Beliebte Zeiterfassung Handbücher anderer Marken

Dyflexis

Dyflexis Rex-O-Matic Noa Bedienungsanleitung

L’EPEE 1839

L’EPEE 1839 TIME FAST II Bedienungsanleitung

TimeMoto

TimeMoto TM-616 Bedienungsanleitung

Videx

Videx 701T Bedienungsanleitung

Kronos

Kronos Timekeeper 400 Series Betriebsanleitung

Scarlett

Scarlett SC-810 Bedienungsanleitung

Funtronix

Funtronix SCORE-N-TIME T-240 Bedienungsanleitung

IKEA

IKEA NUFFRA 10357872 Bedienungsanleitung

Multipipe

Multipipe 22-23015 Benutzerhandbuch

L’EPEE 1839

L’EPEE 1839 SUN CLOCK Bedienungsanleitung

Oregon Scientific

Oregon Scientific TW331 Bedienungsanleitung

MT Logic

MT Logic CL-471 Bedienungsanleitung

Easy Clocking

Easy Clocking XENIO 500 Handbuch

Amano

Amano MTX-15 Bedienungsanleitung

LA CROSSE CLOCK

LA CROSSE CLOCK Harper 404-3450A Bedienungsanleitung

Europa components

Europa components ET167DYD Bedienungsanleitung

TONIN CASA

TONIN CASA Opaca circle Bedienungsanleitung

CS TIMECLOCK

CS TIMECLOCK 2110 Gebrauchsanweisung