La Crosse CA80765 Bedienungsanleitung
SET UP GUIDE
MODEL NUMBER CA80765
4-in-1
projection alarm clock
+ projection clock
+ wireless charger
+ temperature and humidity
+ usb charging port
Table of Contents
BASICS
APPENDIX
Initial Setup
Buttons
LCD Display
Ports
LCD Display Brightness
Auto-Dim Settings
Display Modes
Display Mode Options
Specifications
Warranty
Recycling and Disposal
Cautions/Statements
02
03
04
04
05
05
06
06
14
15
15
15-16
MISC.
Cable Organizer
Smart Watch Stand
Smart Watch Stand
Storage
12
13
13
ALARM
Setting the Alarm
Activate/Deactivate
Snooze Duration
07
07
08
PROJECTION
Projection Brightness
Adjusting the Projection
Projection Image Options
09
09
10
CHARGING
Charging Your Devices
Phone Compatibility
USB Charging Port
11
11
12
Use the +/- buttons on
the top of the clock to
adjust the values.
02
Initial Setup
Power Up
Settings Menu Order
Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack
on the bottom of the alarm clock.
A greeting will appear on the LCD display and then your clock will move into
the Settings Menu.
Beep On/O • 12/24 Format • Hour • Minutes • Year • Month • Date • Celsius/Fahrenheit
You may exit the Settings
Menu at any time by tapping
the button.
BASICS
Tap the button to
confirm selection and
move to next step.
Note: Weekday will set automatically after year, month, and date settings are adjusted.
1
03
Buttons
BASICS
1. DISPLAY OPTION ( )
4. ROTATION WHEEL
7. PLUS/MINUS (+/-)
2. ALARM ( )
5. PROJECTION ( )
3. SNOOZE/BACKLIGHT ( )
6. SET ( )
Tap to select LCD display
mode options
Scroll to rotate the projection
image (left or right)
Tap to increase/decrease values,
hold to change values quickly
Tap to activate/deactivate or
hold to enter alarm settings
Tap to adjust projection
intensity or hold to change
projection mode
Tap to snooze sounding alarm,
adjust backlight, or hold for
Auto-Dim Settings
Hold to enter Settings
Menu
Top View
5
4
3
2
7
6
Power Jack
04
LCD Display
Ports
BASICS
Display Mode
Indicator
Auto-Dim Indicator
Display Mode
Section
Cycle Mode
Icon
1.88 cm
Time Digits
Alarm Icon
Bottom ViewLeft View
1A USB
Charging Port
Factory Reset
Note: To enter the Settings Menu after the initial setup, hold the button on the
top of the clock.
05
LCD Display Brightness
Adjusting the LCD Display Brightness
Auto-Dim Settings
Tap the button on the top of the clock to adjust
the backlight intensity. There are 4 brightness levels,
plus an o option.
1.
2.
3.
4.
Hold the button to enter
the Auto-Dim Settings Menu.
Program your LCD display to automatically dim during preselected times.
Tap the +/- buttons to turn the
Auto-Dim feature on or o.
Tap to confirm.
Tap the +/- buttons to adjust the
starting hour. Tap to confirm.
Tap the +/- buttons to adjust the
stopping hour. Tap to
confirm and exit.
The icon will appear on the LCD when activated.
BASICS
06
Display Modes
Selecting the Display Mode
Display Mode Options
Tap the button on the front of the clock to
select a display mode or automatically cycle
through all of the available options.
AM/PM and
Seconds
Indoor
Temperature
The Color Bars above the time on the LCD
indicate the current display mode.
The icon will appear on the LCD when the
Cycle Mode is active. This setting will automatically
toggle through the available display mode options.
Weekday
+ Date
Indoor
Humidity
BASICS
4. Your sound alarm is now activated,
indicated by the icon on the LCD.
1. Hold the button on the top
of the clock to enter the Alarm
Settings Menu.
2. Use the +/- buttons to set your
desired time. Tap to confirm.
3. Next, use the +/- buttons to set your
desired snooze duration (5 to 120
minutes). Tap to confirm and
exit the Alarm Settings Menu.
07
Time Alarm
Activating and Deactivating the Alarm
1.
2.
Tap the button to activate/
deactivate the alarm and to view
your alarm time.
The icon will appear on the
LCD when the alarm is active.
Setting the Alarm
ALARM
08
Time Alarm
Crescendo Alarm
Snooze Duration Countdown
The alarm will increase in volume over a 2-minute period. After the 2-minute
time frame, the alarm will stop if not snoozed or turned o.
When your alarm sounds, tap the
button to snooze your alarm for your
preselected snooze duration. A countdown
will appear on screen. When the snooze
time reaches “00,” the alarm will sound
again. The snooze feature can be repeated
as many times as desired.
Example:
Based on 7:15am alarm time
7:15 7:16 7:17
ALARM
09
Adjusting the Projection Image
PROJECTION
The Projection Arm tilts forwards and
backwards to adjust the location of the
projection image.
Use the Rotation Wheel on the top of the Projection Arm to rotate
viewing angle of the image.
Tap the button to adjust the
projection’s brightness (HI/LOW/OFF).
Note: The fixed focus projection image will look best at about 2.1 m. (7 ft.).
Inhaltsverzeichnis
Andere La Crosse Wecker Handbücher
La Crosse
La Crosse WT-5220 Bedienungsanleitung
La Crosse
La Crosse T83721 Bedienungsanleitung
La Crosse
La Crosse 616-146v4 Bedienungsanleitung
La Crosse
La Crosse 617-3014 Bedienungsanleitung
La Crosse
La Crosse C89201 Bedienungsanleitung
La Crosse
La Crosse S85906 Bedienungs- und Wartungshandbuch
La Crosse
La Crosse C85135 Bedienungsanleitung
La Crosse
La Crosse 617-1270 Bedienungsanleitung
La Crosse
La Crosse Soluna Installationsanleitung
La Crosse
La Crosse 616-146 Bedienungsanleitung
La Crosse
La Crosse 616A-1908 Bedienungsanleitung
La Crosse
La Crosse 617-1392B Bedienungsanleitung
La Crosse
La Crosse 617-2619 Bedienungsanleitung
La Crosse
La Crosse WT513ER Bedienungsanleitung
La Crosse
La Crosse 617-1280 Bedienungsanleitung
La Crosse
La Crosse Equity 30401 Bedienungsanleitung
La Crosse
La Crosse 617-1270 Bedienungsanleitung
La Crosse
La Crosse W88723 Abmessungen
La Crosse
La Crosse WT-5220U-IT Bedienungsanleitung
La Crosse
La Crosse Equity 30416 Bedienungsanleitung
