Brightness(%):
Brightness of illumination, using fast PWM dimming.
Mirror Lockup button and Led:
Press and hold 1s to the Mirror Lockup button. The function LED is
turned on. If the mirror lockup function is activated on the camera, it must
also be activated on the LACERTA FBC. So that it does not turn on
Flatbox lighting due to the first exposure signal. The setting is stored in
the device.
Standalone use with a computer:
With the little FBC Windows App, it is possible to control your DSLR and
the FBC from your computer. Copy Lacerta_App.exe and its support files
to a folder on your PC, and start it by double clicking on the name. The
control window opens where you can set all necessary parameters. To
use the FBC with PC, all three potentiometers must be turned to 0 before
switching on (FBC is set to serial mode). So the FBC "knows" that we
want to use serial communication via the USB port using the FBC App or
an appropriate program (APT). If the Mirror Lockup function was
activated, its control Led will not turn on, as this function is controlled by
the App now. You can set the exposure time (Exposition (ms)), the
illumination delay (Delay (ms)), the illumination time (Flash (ms)), the
break between the shots (Pause (ms)), Number of shots (Flat Number ),
the intensity of the illumination (Brightness (%)), and whether or not a
Mirror-Lockup is used.
After connecting, the program checks the connected device. When
connecting another device, the connection is interrupted. After
connecting Lacerta FBC successfully, it shows the device firmware
version number. If the Lacerta FBC is not connected in Serial mode, you
will receive a warning:
