Install the 5big Backup Server Connector CD
The 5big Backup Server Connector software does the following:
• Connects your workstation to the 5big Backup Server.
• Automatically backs up your Windows workstations nightly.
• Monitors the health of connected workstations.
• Enables you to congure and remotely administer the 5big Backup Server from any connected workstation.
1. Insert the 5big Backup Server Connector CD into a Windows workstation that is connected to your
network. From the list of options, choose Applications.
2. Click 5big Backup Server Connector.
3. Follow the Wizard steps to connect your workstation to the 5big Backup Server.
4. When the Connector CD is run for the first time, it will prompt you to complete the server Setup.
Continue to follow the Wizard to the end of the setup.
After you complete the setup, run the Connector Wizard on all Windows workstations on the network
to connect them to the 5big Backup Server. When installing on additional workstations, the Connector
may be run from the CD or the Software Shared Folder on the 5big Backup Server. Please note that the
Connector may be run on one workstation at a time.
NOTE: For a more detailed explanation on setting up your 5big Backup Server and more
information on how to use the device, please see the Configuration Guide.
NOTE: Once the installation is complete, LaCie highly recommends enabling the options for
the Customer Experience Improvement Program and Windows Error Reporting. Both
may be turned on in the Server Console>Settings>General. See the Configuration Guide
for more information.