LaCie 301304U Bedienungsanleitung

Inhaltsverzeichnis

Andere LaCie Lagerung Handbücher

LaCie

LaCie LaCinema Classic HD Bedienungsanleitung

LaCie

LaCie Rugged 301924 Bedienungsanleitung

LaCie

LaCie d2 SATA II 3Gbits Bedienungsanleitung

LaCie

LaCie 300718 Bedienungsanleitung

LaCie

LaCie 12big Rack Serial 2 Bedienungsanleitung

LaCie

LaCie d2 Serial ATA Bedienungsanleitung

LaCie

LaCie 301385U Bedienungsanleitung

LaCie

LaCie 301939 Bedienungsanleitung

LaCie

LaCie Hard Drive Porsche Bedienungsanleitung

LaCie

LaCie D2 BLU-RAY XL Bedienungsanleitung

LaCie

LaCie 300724 - AIT 2 U&I Tape Drive Bedienungsanleitung

LaCie

LaCie 301359U Bedienungsanleitung

LaCie

LaCie 12big Rack Fibre 8 Bedienungsanleitung

LaCie

LaCie Starck Desktop Hard Drive Bedienungsanleitung

LaCie

LaCie Rugged RAID Pro Bedienungsanleitung

LaCie

LaCie LAC301558 Bedienungsanleitung

LaCie

LaCie 301829 Bedienungsanleitung

LaCie

LaCie FireWire 800 Bedienungsanleitung

LaCie

LaCie 301534 Bedienungsanleitung

LaCie

LaCie hard disk MAX Bedienungsanleitung

LaCie

LaCie SAFE Mobile Hard Drive Bedienungsanleitung

LaCie

LaCie 2big DOCK Bedienungsanleitung

LaCie

LaCie Brick Bedienungsanleitung

LaCie

LaCie 4BIG QUADRA USB 3.0 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung

Quantum

Quantum PX506 Bedienungsanleitung

Disassembly instructions for LaCie 301304U "Design by Neil

Poulton" external hard dri e:

Neil Poulton may be an award winning "industrial designer," but he's not an engineer. This thing is

a bit tricky to disassemble.

The black shiny plastic top is a single piece cover over a metal bottom plate. It is held in place by

plastic bumps on the inside edges of the cover that fit into slots in the metal bottom's vertical walls.

There are no screws.

There are two bumps along each of the long edges of the plastic cover, and two similar ones on the

short side with the ED light underneath. There are two smaller bumps placed closer together on

the power/USB/switch side of the drive, and between those is another sort of vertical grapple that

holds the cover down more firmly on that side.

First, here is what the top (plastic) part of the casing looks like, turned upside down. The various

snappy things are hilighted. We will release the B UE ones first, then the GREEN ones, and finally

the rear RED ones.

To open the case:

1. Use a thin plastic or metal thing (like a putty knife) to pry the plastic away from the metal

bottom on one of the long sides. Insert a CD or a credit card that you don’t care about into the

gap to hold it open.

2. Do the same thing with the other side. Your enclosure should now look like this:

(The masking tape isn't related to this procedure; I just like to

note the voltage and polarity of the power supply on devices

that don't come with such a label.

[12 volts 2 amps, + on the inside, - outside for this drive.])

3. Pry the side with the blue ED light under it (not the side with the power and USB connectors);

you should be able to get the drive to fall partway out of the cover on this side if you hold it

close to vertical and gently pry & rock the casing back & forth. ike this:

That's a nail file, not the

sharp knife

Bottom part

should fall

away from

top casing

like this

(careful)

4. Carefully wiggle the cover around until it comes free of the back part. The power switch, USB

port, and power connector are not attached to the top cover, but you should still be very careful

not to break them. Eventually the middle post/grapple thing should let go and the cover will

come off completely. Be careful not to drop the drive!

5. Remove the screws and the ED connector.

6. Gently, and very slowly, slide the drive forward away from the SATA connector. The connector

is soldered onto the board, so if it breaks you’ll need to re-solder a lot of tiny connections.

Remember to put the four screws back in when you reassemble the drive, otherwise the

only thing holding it in will be the SATA connector and it will probably break from the

stress!

Screws Screws

Disconnect this