Laguna Tools Dake VDL-18 Benutzerhandbuch

Dake Corporation Phone: 800.937.3253 www.dakecorp.com

1809 Industrial Park Dr. [email protected]

Grand Haven, MI 49417

DAKE VDL-18

ASSEMBLY AND INSTRUCTIONAL MANUAL

WARNING! Read and understand all instructions and responsibilities before

operating. Failure to follow safety instructions and labels could result in

serious injury.

Dake Corporation

1809 Industrial Park Dr

Grand Haven, MI 49417

www.dakecorp.com

Part# VDL-18 2 REV#082020

Table of Contents

DAKE Standard Limited Warranty.....................................................................................................3

Finished Machines ............................................................................................................................3

Parts..................................................................................................................................................3

Sale of Service (Repairs)...................................................................................................................3

Warranty Process..............................................................................................................................3

Warranty Exceptions .........................................................................................................................4

Return & Refund Policy......................................................................................................................4

Returns..............................................................................................................................................5

Refunds.............................................................................................................................................5

Specifications......................................................................................................................................6

Machine Specifications......................................................................................................................6

Safety Warnings..................................................................................................................................7

Safety Labels:..................................................................................................................................10

Introduction - Assembly of components-Before starting……………………………………………….11-25

Blade install - tracking - tensioning ………………………………………………………………….26-28

Ceramic Guide Adjustment …..……………………………………………………………………….29-33

General Instructions: .......................................................................................................................33

Blade Guidepost Adjustment:..........................................................................................................34

Table Tilt:.........................................................................................................................................34

Fence Assembly Adjustment:..........................................................................................................35

Maintenance......................................................................................................................................35

Trouble Shooting:.......................................................................................................................36-37

Parts List.......................................................................................................................................38-57

Parts list & Exploded diagrams …………………………………………………………..…………..38-57

1VDL-18 Wiring Diagram:................................................................................................................58

Order Information .............................................................................................................................59

Part# VDL-18 3 REV#082020

DAKE Standard Limited Warranty

Finished Machines

-Dake warrants to the original purchaser the finished machine manufactured or distributed

by it to be free from defects in material and workmanship under normal use and service

within 1 year (12 months) from the delivery date to the end user.

Parts

-Dake warrants to the original purchaser the component part manufactured or distributed

by it to be free from defects in material and workmanship under normal use and service

within 30 days from the delivery date to the end user.

-The standard limited warranty includes the replacement of the defective component part

at no cost to the end user.

Sale of Service (Repairs)

-Dake warrants to the original purchaser the component part repaired by Dake

Corporation at the manufacturing facility to be free from defects in material and

workmanship under normal use and service within 90 days from the return date to the

end user, as it pertains to the repair work completed.

-The standard limited warranty includes repair of the defective component part, at no cost

to the end user.

Warranty Process

-Subject to the conditions hereinafter set forth, the manufacturer will repair or replace any

portion of the product that proves defective in materials or workmanship. The

manufacturer retains the sole right and option, after inspection, to determine whether to

repair or replace defective equipment, parts or components. The manufacturer will

assume ownership of any defective parts replaced under this warranty.

-All requested warranty claims must be communicated to the distributor or representative

responsible for the sale. Once communication has been initiated, Dake Customer Service

must be contacted for approval:

Part# VDL-18 4 REV#082020

•Phone: (800) 937-3253

•Email: customerservice@dakecorp.com

When contacting Dake, please have the following information readily available:

-Model #

-Serial #

-Sales Order #

Purchasers who notify Dake within the warranty period will be issued a Case number and/or a

Return Material Authorization (RMA) number. If the item is to be returned per Dake’s request,

the RMA number must be clearly written on the exterior packaging. Any item shipped to Dake

without an RMA will not be processed.

Warranty Exceptions

The following conditions are not applicable to the standard limited warranty:

(a) Part installation or machine service was not completed by a certified professional,

and is not in accordance with applicable local codes, ordinances, and good trade

practices.

(b) Defects or malfunctions resulting from improper installation or failure to operate or

maintain the unit in accordance with the printed instructions provided.

of prepaid freight terms.

(d) Normal maintenance service or preventative maintenance, and the parts used in

connection with such service.

(e) Units and parts which have been altered or repaired, other than by the manufacturer

or as specifically authorized by the manufacturer.

(f) Alterations made to the machine that were not previously approved by the

manufacturer, or that are used for purposes other than the original design of the

machine.

Return & Refund Policy

-Thank you for purchasing from Dake! If you are not entirely satisfied with your

purchase, we are here to help.

Part# VDL-18 5 REV#082020

Returns

-All Dake manufactured / distributed machines, parts and couplings include a 30-day return

option. These policies are valid from the date of final shipment to the end user. To be

eligible for a return, the item must be unused and in the same condition as received. All

requested warranty claims must be communicated to the distributor or representative

responsible for the sale. Once communication has been initiated, Dake Customer Service

must be contacted for approval:

-Phone: (800) 937-3253

-Email: [email protected]

-Once the return request has been approved by Customer Service, a representative will

supply a Return Material Authorization (RMA) number.

-The returned item must have the provided RMA number clearly marked on the outside

packaging. Any item received without an RMA number clearly visible on the packaging

will not be processed.

-An RMA number can only be provided by the Dake Customer Service team and must

be obtained prior to the return shipment.

Refunds

-Once the item has been received and inspected for damages, a representative will

notify the requestor referencing the provided RMA number. If the return is approved, a

refund will be issued to the original method of payment, less a 20% restocking fee.

-The restocking fee may be waived if an order is placed at the time of return with like-

value merchandise. Transportation costs are the responsibility of the end user and will

not be credited upon return approval.

-Any item that is returned after the initial 30 days or has excessive/obvious use will not

be considered for a full refund.

Part# VDL-18 6 REV#082020

Specifications

Machine Specifications

VDL-18 Bandsaw

Description

Dimensions

Motor Voltage/HP

115/ 230V (prewired 115V)/ 1-3/4HP

Breaker

15 amp for both 115V and 230V

Throat

18 7/32" (463mm)

Table cast iron

20" x 26" (508mm x 660mm)

Front table to center of blade

11" (280mm)

Table tilt

- 6 degrees + 45 degrees

Miter slot

3/8" x 3/4" (9.525mm x 19.05mm)

Table height

38" (965mm)

Fly wheel

Cast iron

Resaw capacity

16" (406.4mm)

Minimum blade length

143 3/4" (3,651mm)

Maximum blade length

145 1/2" (3,695mm)

Maximum blade width

1-1/4" (31.75mm)

Minimum blade width

1/8" (3mm)

Guides

Laguna ceramic

Blade speeds (FPM)

Variable speeds

Low: 100-290

High: 1200-3500

Dust chute diameter (OD)

4" x 2

Height

77 3/4" (1,975mm)

Machine dimensions (W x D) Base

footprint

36 3/16" x 36" (919mm x 915mm)

27" x 19 2/3" (688mmx500mm)

Machine dimensions with mobility kit (W

x D)

Base footprint with mobility kit

43" x 36" (1093mm x 915mm)

37 3/8" x 24 11/32" (949mm x 618mm)

Weight gross

515 lbs (234 kg)

Weight net

480 lbs (218 kg)

Package size (W x D x H)

81 1/2" x 33 7/8" x 30-1/4"

(2070mm x 860mm x 770mm)

Variable Foot Brake

Disk Rotor

Mobility kit

Optional

Industrial work-light

Optional

Part# VDL-18 7 REV#082020

-In the space provided record the serial number and model number of the machine. This

information is only found on the black Dake tag. If contacting Dake this information must be

provided to assist in identifying the specific machine.

Model No:

Part No:

Serial No:

Date of Purchase:

Safety Warnings

BEFORE USE, ALL SAFTEY INSTRUCTIONS MUST BE READ

-As you know, the vertical bandsaw is a universal saw for contour cutting. Blade selection is

important and by choosing the right blade, you can make most any pattern cutting on most any

material with this machine. However, the most important thing is to realize how to operate it in

a safe and correct way and how to maintain it.

-We have tried to supply you all the information about these. Please be sure to look

through all the contentsin this manual so that you may obtain themaximum efficiency

and the longest machine life with minimum expense.

Part# VDL-18 8 REV#082020

-The specifications and information in this manual were current at the time this

manual was approved for printing. Dake, whose policy is one of continuous

improvement, reserves the right, however, to change specifications or design at any

time without incurring obligations.

-Always include the part number, model number, and parts description, for parts

orders or correspondence concerning your bandsaw, so we can supply you a

rapidly after-sales service.

▲WARNING

1. Read the operator’s manual carefully. Learn the tools applications and limitations, as

well as the specific potential hazards peculiar to it.

2. Always wear approved safety glasses/face shields while using this machine.

3. Make certain the machine is properly grounded.

4. Before operating the machine, remove tie, rings, watches, other jewelry, and roll up

sleeves above the elbows. Remove all loose clothing and confine long hair. DO NOT

wear gloves when operating.

5. Keep the floor around the machine clean and free of scrap material, oil and grease.

6. Always keep machine guards in place when the machine is in use. If removed for

maintenance purposes, use extreme caution, and replace the guards immediately.

7. DO NOT overreach! Always maintain a balanced stance. Do not fall or lean against

blades or other moving parts.

8. Use only sharp blades. Dull blades are dangerous.

9. Make all machine adjustments or maintenance with the machine unplugged from the

power source.

10. Use the right tool. DO NOT force a tool or attachment to do a job which it was not

designed for.

11. DO NOT make cuts requiring more power than is available on the machine.

12. Replace warning labels if they become obscured or removed.

13. Make certain the motor switch is in the OFF position before connecting the machine to

power.

14. Give your work undivided attention. Looking around, carrying on a conversation. And

“horse-play” is careless acts that can result in serious injury.

Part# VDL-18 9 REV#082020

15. Make a habit of checking to see that keys and adjusting wrenches are removed before

turning on the machine.

16. Keep visitors a safe distance from the work area.

17. Use recommended accessories; improper accessories may be hazardous.

18. Never place hands directly in line with the saw blade.

19. Always use push sticks when cutting small material.

20. Raise or lower the blade guide only when the machine has been turned off and the blade

has stopped moving.

21. Read and understand warnings posted on the machine.

22. DO NOT use attachments for any other purpose than for what they were designed for.

Failure to comply with all these warnings could lead to serious injury.

This is the safety alert symbol.

-When you see this symbol on your press be alert to the potential for personal injury.

▲WARNING

All electrical connections must be done by a qualified electrician. Failure to comply

may cause serious injury!

All adjustment or repairs must be done with the machine disconnected from the power

source. Failure to comply may result in serious injury!

Part# VDL-18 10 REV#082020

Safety Labels:

Label Part # 84605 Label Part # 84395 Label Part # 84605

Label Part # 84604 Label Part # 82199

Andere Handbücher für Dake VDL-18

Inhaltsverzeichnis

Andere Laguna Tools Gesehen Handbücher

Laguna Tools

Laguna Tools DAKE 14-10 Bedienungsanleitung

Laguna Tools

Laguna Tools Platinum Series Bedienungsanleitung

Laguna Tools

Laguna Tools 14BX Series Bedienungsanleitung

Laguna Tools

Laguna Tools Dake VDL-18 Bedienungs- und Wartungshandbuch

Laguna Tools

Laguna Tools 18CX Bedienungsanleitung

Laguna Tools

Laguna Tools DAKE SUPER CUT 315 Bedienungsanleitung

Laguna Tools

Laguna Tools DAKE Euromatic 370S Bedienungs- und Wartungshandbuch

Laguna Tools

Laguna Tools MTST5S-0135 Bedienungsanleitung

Laguna Tools

Laguna Tools Fusion 1 Bedienungsanleitung

Laguna Tools

Laguna Tools Dake Technics 350 CE Bedienungsanleitung

Laguna Tools

Laguna Tools DAKE Technics 350 SA Bedienungs- und Wartungshandbuch

Laguna Tools

Laguna Tools DAKE SE-1018 Bedienungs- und Wartungshandbuch

Laguna Tools

Laguna Tools LT14 SEL Bedienungsanleitung

Laguna Tools

Laguna Tools MPSP12-4-0135 Bedienungsanleitung

Laguna Tools

Laguna Tools Fusion 2 Bedienungsanleitung

Laguna Tools

Laguna Tools Fusion F1 Bedienungsanleitung

Laguna Tools

Laguna Tools 18BX Bedienungsanleitung

Laguna Tools

Laguna Tools MCO8000-0250 Bedienungsanleitung

Laguna Tools

Laguna Tools Fusion F1 Bedienungsanleitung

Laguna Tools

Laguna Tools MPSP12-5-0135 Bedienungsanleitung

Laguna Tools

Laguna Tools DAKE SE-810 Bedienungs- und Wartungshandbuch

Laguna Tools

Laguna Tools 16HD Classic Bedienungsanleitung

Laguna Tools

Laguna Tools Timbermaster Bedienungsanleitung

Laguna Tools

Laguna Tools MBAND18BX2203 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung