Laipac M2M 3350 Bedienungsanleitung

M2M 3350 GSM/GPRS Modem

User’s Manual & Reference Guide

Revision 1 – June 2007

notice. All statements, information, and recommendations in this manual are believed to be accurate but are represented without warranty of any kind, express or implied,

users must take full responsibility for their applications of any Products - Reproduction of the contents of this manual, in whole or in part, without written permission of

Laipac Technology, Inc. is prohibited.

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

Table of Contents

1INTRODUCTION...………………………………............4

2FEATURES.………………………………………………4

3CONFIGURATION AND SETUP………………………5

3.1 What you will need……………………………………………….5

3.2 Getting Started……..……………………………………………..5

3.3 USB Driver Installation……...…..……………………………….6

3.4 Creating a Modem Profile in Windows…………………………..8

3.5 Creating the Modem Connection.………………………………..11

3.6 Bluetooth Dongle Driver Installation…………………………….16

3.7 Pairing your Devices……………………………………………..17

4 SIM CARD RECOMMENDATIONS………………….21

5 HARDWARE DETAILS………………………………...21

5.1 GSM Modem Specifications……………………………………..21

5.2 GSM Antenna Specifications…………………………………….21

5.3 Physical Characteristics………………………………………….22

5.4 Temperature Range………………………………………………22

5.5 Power Supply…………………………………………………….22

5.6 RS232 and USB Connector Pinout………………………………23

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

6 OPERATION……………………………………………24

6.1 LED Operation…………………………………………………..24

6.2 SIM Card Tray……………….…………………………………...24

6.3 USB/COM Switch………………………………………………..24

6.4 Power Supply...…………………………………………………...24

6.5 Headphone Jack...………………………………………………...25

7 COMMANDS…………..………………………………...25

8 TROUBLESHOOTING………………………………….26

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

1 INTRODUCTION

The M2M 3350 is a GSM/GPRS modem which allows you to connect to the internet anywhere

there is GSM coverage. Using a SIM card you can download emails, surf the web, send/receive

SMS, send faxes, and make phone calls from your PC while on the road. The M2M 3350 uses the

power from your USB port so it does not require any external power supply. You can connect to

the M2M 3350 using USB, RS232, and Bluetooth (Optional). The M2M 3350 is available for quad

band 850/900/1800/1900Mhz networks.

2 FEATURES

•Easy to install

•Compact and robust enclosure

•Quick and easy to setup via Windows™

•Available for quad-band GSM operation (850/900/1800/1900MHz)

•USB Powered

•Send SMS or make phone calls using the dialer

•Access the web from anywhere

•Uses a standard SIM card

•USB, RS232, Bluetooth interfaces

•LEDs show complete modem status

•Hayes Modem AT command set available for API

•Detachable GSM antenna

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

3 CONFIGURATION AND SETUP

This section will help you setup a connection for your M2M 3350 using Windows XP.

3.1 What you will need

To begin you will need the following:

•M2M 3350

•A PC with Windows XP and at least one USB port

•GSM antenna

•GPRS enabled SIM card with known APN settings

•USB cable

•M2M 3350 CD

•Bluetooth USB dongle (optional)

•Bluetooth Serial dongle (optional)

3.2 Getting Started

Follow the steps below to setup your M2M 3350 internet connection.

1. Insert the SIM card into the SIM Card Tray on the front of the unit

2. Connect the GSM antenna

3. Insert the M2M 3350 CD into your PC

4. Continue to section 3.3.

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

3.3 USB Driver Installation

Put the M2M 3350 CD into your computer and make sure the modem is not connected to the PC.

Click ‘USB Driver Install’ and follow the instructions.

After the pre-installation has finished, connect the M2M 3350 to your PC using the USB cable.

A message should pop-up saying “Found New Hardware” and then the “Found New Hardware

Wizard” will appear.

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

Click “yes, this time only”, then click ‘Next’.

Click “Install the software automatically (Recommended)” and click ‘Next’.

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

Finally, a message window will appear at the bottom of the screen: “Your new hardware is

installed and ready to use”.

If the “Found New Hardware Wizard” appears again, follow the instructions again as above to

complete the installation.

3.4 Creating a Modem Profile for the M2M 3350

If you are using the modem in USB mode, make sure the selector switch on the front of the

modem is set to ‘USB’. If you are using the serial or Bluetooth option, make sure the selector

switch is set to ‘COM’.

!!If you are using the Bluetooth option, skip to section 3.6!!

In order to know which comm. port the modem is emulating for USB we need to open Control

Panel>System>Hardware>Device Manager>Ports and see which port the modem is using. In

this case it is ‘CP210x USB to UART Bridge Controller (COM 4)’ as shown below.

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

Now that we know which comm. port our modem is using we need to create a profile for the

modem. To do this go to Control Panel>Phone and Modem Options>Modems. At the bottom of

the menu screen, click “Add…” Check the ‘Don’t select my modem; I will select it from a list’

checkbox and click “Next”. Select the ‘Standard 56000 bps Modem’ from the list and click

“Next”.

In the next screen select the comm. port which we had confirmed earlier and click “Next” and then

“Finish”. Now, under the Phone and Modem Options section of the Control Panel you should see

the modem we just created on the correct comm. port.

Laipac Technology Inc. M2M 3350 User’s Manual & Reference Guide

Now with the modem selected, click Properties>Advanced and enter the following string of text

under Extra initialization commands +cgdcont=1,”IP”,”Carrier APN”where the ‘Carrier APN’

is specific to the provider of your SIM card. In this example we are using the Rogers network in

Canada which has the APN (Access Point Name) ‘internet.com’. If you were using Cingular in the

US as another example you would use ‘ISP.CINGULAR’. You can refer to the following website

for a comprehensive list of APN settings for various networks around the world

http://www.laipac.com/gprs_setting.htm. Every carrier also has a username and password as listed

on the webpage. These will be used later. In the case of the Rogers network they are ‘wapuser1’

and ‘wap’ respectively.

Now click ‘OK’ and move on to the next section.

Inhaltsverzeichnis

Andere Laipac Modem Handbücher

Laipac

Laipac S911 Lola Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung