Laird MSD45N Kurzanleitung zur Einrichtung

Laird MSD45N

Hardware Integration Guide

Version 1.1

Embedded Wireless Solutions Support Center: http://ews-support.lairdtech.com

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Asia: +852-2923-0610

www.lairdtech.com/wireless

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

REVISION HISTORY

Version

Revision Date

Change Description

1.0 25 July 2014 Initial Release

1.1 5 August 2014 Added note to SDIO Timing Requirements regarding SDIO bus clock rate.

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

CONTENTS

Scope............................................................................................................................................................. 4

Operational Description.............................................................................................................................. 4

Block Diagram.............................................................................................................................................. 5

Specifications ............................................................................................................................................... 5

Recommended Operating Conditions and DC Electrical Characteristics ................................................. 8

SDIO Timing Requirements......................................................................................................................... 9

Pin Definitions............................................................................................................................................ 10

MSD40NBT and MSD45N Pin Comparison Table...................................................................................... 13

Integration Considerations ....................................................................................................................... 14

Mechanical Specifications ......................................................................................................................... 15

Connector Overview ................................................................................................................................ 15

MSD45N Attached to T-Board ............................................................................................................. 15

Mounting 16

RF Layout Design Guidelines..................................................................................................................... 16

Regulatory.................................................................................................................................................. 17

Certified Antennas ................................................................................................................................... 17

Documentation Requirements.................................................................................................................. 17

FCC 17

Industry Canada................................................................................................................................... 19

European Union................................................................................................................................... 21

Appendix A: Schematic.............................................................................................................................. 24

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

SCOPE

This document describes key hardware aspects of the Laird MSD45N radio module. This document is

intended to assist device manufacturers and related parties with the integration of this radio into their host

devices. Data in this document is drawn from a number of sources and includes information found in the

Qualcomm Atheros (QCA) AR6003 data sheet issued in January 2010, along with other documents provided

from Qualcomm Atheros.

The information in this document is subject to change. Please contact Laird Technologies or visit

http://www.lairdtech.com/wireless to obtain the most recent version of this document.

OPERATIONAL DESCRIPTION

This device is a Laird MSD45N radio module which supports IEEE 802.11a/b/g/n

standards via an SDIO (Secure Digital Input/Output) interface. The radio operates

in unlicensed portions of the 2.4 GHz and 5 GHz radio frequency spectrum. The

device is compliant with IEEE 802.11a, 802.11b, 802.11g, and 802.11n standards

using Direct Sequence Spread Spectrum (DSSS) and Orthogonal Frequency

Division Multiplexing (OFDM). The device supports all 802.11a, 802.11b,

802.11g, and 802.11n data rates and automatically adjusts data rates and

operational modes based on various environmental factors.

When operating on channels in the UNII-2 and UNII-2 Extended bands that are in

the 5GHz portion of the frequency spectrum and are subject to Dynamic Frequency Selection requirements,

the MSD45N fully conforms to applicable regulatory requirements. In the event that specified types of radar

are detected by the network infrastructure, the MSD45N fully conforms to commands from the infrastructure

for radar avoidance.

The MSD45N interfaces to host devices via a 60-pin connector. The device is based on the Qualcomm

Atheros AR6003 chip which is an integrated device providing a Media Access Controller (MAC), a Physical

Layer Controller (baseband or BB processor), and fully integrated dual-band radio transceiver. To maximize

operational range, the MSD45N incorporates external 2.4 and 5 GHz power amplifiers (PA) to increase

transmit power. The frequency stability for both 2.4 GHz (802.11b and 802.11g) and 5 GHz (802.11a)

operation is +/- 20 ppm.

On the interface connector (Molex 60-pin connector; pin 21), an I/O voltage level configuration (either 3.3 V

or 1.8 V) is required from the host platform to configure the SDIO bus signal to run at a 3.3 V or 1.8 V signal

level. The MSD45N also provides the 3-wire Wi-Fi/BT coexistence signals to ensure the performance of Wi-Fi

and BT system when they reside in the same platform. A cellular coexistence filter is implemented on the

MSD45N to provide robust performance when implemented with a cellular system.

The MSD45N has its own RF shielding and does not require shielding provided by the host device into which

it is installed in order to maintain compliance with applicable regulatory standards. As such, the device may

be tested in a standalone configuration via an extender card.

The device buffers all data inputs so that it will comply with all applicable regulations even in the presence of

over-modulated input from the host device. Similarly, the MSD45N incorporates power regulation to comply

with all applicable regulations even when receiving excess power from the host device.

The MSD45N combines the 2.4 and 5 GHz signal path to signal U.FL type antenna connectors to support dual

band transmission and receive. An antenna diversity function is NOT supported in this product. Supported

host device antenna types include dipole and monopole antennas.

Regulatory operational requirements are included with this document and may be incorporated into the

operating manual of any device into which the MSD45N is installed. The MSD45N is designed for installation

into mobile devices such as vehicle mount data terminals (which typically operate at distances greater than 20

cm from the human body) and portable devices such as handheld data terminals (which typically operate at

distances less than 20 cm from the human body). See “Documentation Requirements” for more information.

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

BLOCK DIAGRAM

Figure 1: MSD45 Block Diagram

Note: Transmitter frequencies for Wi-Fi are 2412-2462 MHz and 5180-5805 MHz.

SPECIFICATIONS

Table 1: Specifications

Feature

Description

Physical Interface

Molex 54722-0607 60-pin connector (mates to Molex 55560-0607 60-pin

connector)

Wi-Fi Interface

1-bit or 4-bit Secure Digital I/O

Note:

Can support 1.8 V or 3.3 V depending on the supply voltage on VDDIO

(pin-21).

Antenna Interface

1 Hirose U.FL connector

Main Chip

Qualcomm Atheros AR6003 single-chip client

Input Voltage Requirements

3.3 VDC ± 5% (core)

I/O Signalling Voltage

3.3 VDC ± 5%

1.8 VDC ± 5%

Average Current

Consumption

(At maximum transmit

power setting)

Note:

Standby

refers to the

radio operating in PM1

powersave mode.

Mode

1.8 V

3.3 V

Avg.

Current

Max.

Current

Avg.

Current

(mA)

Max.

Current

(mA)

802.11a

Transmit

0.11

496

500

Receive

0.11

0.2

Standby

TBD

802.11b

Transmit

0.11

380

420

Receive

0.11

0.2

Standby

TBD

802.11g

Transmit

0.11

355

410

Receive

0.11

0.2

Standby TBD TBD TBD TBD

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

Feature

Description

802.11n

(2.4 GHz)

Transmit

0.11

342

420

Receive

0.11

0.2

Standby

TBD

802.11n

(5 GHz)

Transmit 0.11 0.11 422 500

Receive

0.11

0.2

Standby

TBD

Sleep

N/A

TBD

Operating Temperature

-20° to 70°C (-4° to 158°F)

Operating Humidity

10 to 90% (non-condensing)

Storage Temperature

-40° to 85°C (-40° to 185°F)

Storage Humidity

10 to 90% (non-condensing)

Maximum Electrostatic

Discharge

Maximum Contact Discharge (CD): 4 kV

Maximum Air Discharge (AD): 8 kV

Length

32 mm (1.26 in.)

Width

22 mm (0.87 in.)

Thickness

3.38 mm (0.17 in.)

Weight

0.2 g (0.08 oz.)

Mounting

60-pin connector, three grounded mounting holes (M2 screws)

Wi-Fi Media

Direct Sequence-Spread Spectrum (DSSS)

Complementary Code Keying (CCK)

Orthogonal Frequency Divisional Multiplexing (OFDM)

Wi-Fi Media Access Protocol

Carrier sense multiple access with collision avoidance (CSMA/CA)

Network Architecture Types

Infrastructure and ad hoc

Wi-Fi Standards

IEEE 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11n

Wi-Fi Data Rates Supported

802.11a (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps

802.11b (DSSS, CCK): 1, 2, 5.5, 11 Mbps

802.11g (OFDM): 6, 9, 12, 18, 24, 36, 48, 54 Mbps

802.11n (OFDM,HT20,MCS 0-7): 6.5,13,19.5, 26, 39,52, 58.5, 72.2 Mbps

7.2,14.4, 21.7, 28.9,43.3, 57.8, 65 Mbps

Wi-Fi Modulation

BPSK @ 1, 6, 6.5, 7.2 and 9 Mbps

QPSK @ 2, 5.5, 11, 12, 13, 14.4,18, 19.5 and 21.7 Mbps

16-QAM @ 24, 26, 28.9, 36, 39 and 43.3 Mbps

64-QAM @ 48, 52, 54, 57.8, 58.5, 65, and 72.2 Mbps

802.11n Spatial Streams

1x1 SISO (Single Input, Single Output)

Regulatory Domain Support

FCC (Americas, Parts of Asia, and Middle East)

ETSI (Europe, Middle East, Africa, and Parts of Asia)

MIC (Japan) (formerly TELEC)

KC (Korea) (formerly KCC)

2.4 GHz Frequency Bands

ETSI: 2.4 GHz to 2.483 GHz

FCC: 2.4 GHz to 2.483 GHz

MIC (Japan): 2.4 GHz to 2.495 GHz

KC: 2.4 GHz to 2.483 GHz

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

Feature

Description

2.4 GHz Operating

Channels

ETSI:13 (3 non-overlapping)

FCC:11 (3

non-overlapping)

MIC (Japan):14 (4 non-overlapping)

KCC:13 (3 non-overlapping)

5 GHz Frequency Bands

ETSI

5.15 GHz to 5.35 GHz

5.47 GHz to 5.725 GHz

FCC

5.15 GHz to 5.35 GHz

5.725 GHz to 5.82 GHz

MIC 5.15 GHz to 5.35 GHz

KC 5.15 GHz to 5.35 GHz

5.47 GHz to 5.725 GHz

5.725 GHz to 5.82 GHz

5 GHz Operating Channels

ETSI:1

9 non-overlapping)

FCC: 23 non

-overlapping

MIC: 8 non-overlapping

KC: 8 non-overlapping

Transmit Power

Note:

Transmit power

varies according to

individual country

regulations. All values

nominal, +/-2 dBm.

Note:

Laird 45 series radios

support a single

spatial stream and 20

MHz wide channels

for N rates.

802.11a:

6 Mbps 15 dBm (32 mW)

54 Mbps 15 dBm (32 mW)

802.11b:

1 Mbps 16 dBm (40 mW)

11 Mbps 16 dBm (40 mW)

802.11g:

6 Mbps 16 dBm (40 mW)

54 Mbps 14 dBm (25 mW)

802.11n

(2.4 GHz):

6.5 Mbps (MCS0) 16 dBm (40 mW)

65 Mbps (MCS7) 12 dBm (16 mW)

802.11n

(5 GHz): 6.5 Mbps (MCS0) 15 dBm (32 mW)

65 Mbps (MCS7) 12 dBm (16 mW)

Typical Receiver Sensitivity

Note:

All values nominal,

+/-3 dBm.

802.11a:

6 Mbps -91 dBm

54 Mbps -73 dBm (PER <=10%)

802.11b:

1 Mbps -92 dBm

11 Mbps -84 dBm (PER <=10%)

802.11g:

6 Mbps -91 dBm

54 Mbps -74 dBm (PER <=10%)

802.11n

(2.4 GHz): MCS0 Mbps -89 dBm

MCS7 Mbps -71 dBm

802.11n

(5 GHz): MCS0 Mbps -89 dBm

MCS7 Mbps -71 dBm

Operating Systems

Supported

Android, Linux, Windows CE, Windows Mobile (NDIS5)

Security

Standards

Wireless Equivalent Privacy (WEP)

Wi-Fi Protected Access (WPA)

IEEE 802.11i (WPA2)

Note:

Support for Federal Information Processing Standards (FIPS) is pending.

Encryption

Wireless Equivalent Privacy (WEP, RC4 Algorithm)

Temporal Key Integrity Protocol (TKIP, RC4 Algorithm)

Advanced Encryption Standard (AES, Rijndael Algorithm)

Encryption Key Provisioning

Static (40-bit and 128-bit lengths)

Pre-Shared (PSK)

Dynamic

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

Feature

Description

802.1X Extensible Authentication Protocol Types

EAP

-FAST

EAP

-TLS

EAP

-TTLS

PEAP-GTC

PEAP-MSCHAPv2

PEAP-TLS

LEAP

Compliance

ETSI Regulatory Domain

EN 300 328

EN 301 489-1

EN 301 489-17

EN 301 893

EN 60950-1

EN 62311

EU 2002/95/EC (RoHS)

FCC Regulatory Domain

FCC 15.247 DTS – 802.11b/g (Wi-Fi) – 2.4 GHz & 5.8 GHz

FCC 15.407 UNII – 802.11a (Wi-Fi) – 2.4 GHz & 5.4 GHz

Industry Canada

RSS-210 – 802.11a/b/g/n (Wi-Fi) – 2.4 GHz, 5.8 GHz, 5.2 GHz, and 5.4 GHz

Certifications

Note:

These certifications

are pending.

Wi-Fi Alliance

802.11a, 802.11b, 802.11g , 802.11n

WPA Enterprise

WPA2 Enterprise

Cisco Compatible Extensions (Version 4)

Warranty

Limited Lifetime

All specifications are subject to change without notice

RECOMMENDED OPERATING CONDITIONS AND DC ELECTRICAL CHARACTERISTICS

Table 2: Absolute Maximum Ratings

Symbol

Parameter

Min.

Typ.

Max.

Unit

VCC3_3

Power supply voltage with respect to ground

-0.3

4.0

VDD_IO

Power supply voltage with respect to ground

-0.3

4.0

Voltage Ripple

+/-2%, 10KHz~100KHz

Max. values not exceeding Operating voltage

RFin

Maximum RF input (reference to 50 ohm) - -+10 dBm

Table 3: Recommended Operating Conditions

Symbol

Parameter

Min.

Typ.

Max.

Unit

VCC3_3

Power supply voltage with respect to ground

3.14

3.3

3.46

VDD_IO

Power supply voltage with respect to ground

1.71

3.14

1.8

3.3

1.89

3.46

Note: VDD_IO is a voltage from the host platform to configure the I/O signal level. It can be set 1.8 or 3.3 V.

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

SDIO Timing Requirements

The following figure (Figure 1) and table display SDIO default mode timing.

Note: The SDIO bus should not exceed a 25 MHz clock rate.

Figure 2: SDIO Default Mode Timing

Note: Timing is based on CL ≤40 pF load on CMD and Data.

Table 4: SDIO Timing Requirements

Symbol

Parameter

Min.

Typ.

Max.

Unit

fPP Frequency – Data Transfer mode 0 - 50 MHz

tWL Clock low time 7 - - ns

tWH Clock high time 7 - - ns

tTLH Clock rise time - - 10 ns

tTHL Clock low time - - 10 ns

Inputs: CMD, DAT (referenced to CLK)

tISU Input setup time 6 - - ns

tIH Input hold time 2 - - ns

Outputs: CMD, DAT (referenced to CLK)

tODLY Output delay time – Data Transfer mode 0 - 14 ns

Laird MSD45N

Hardware Integration Guide, version 1.1

Embedded Wireless Solutions Support Center:

http://ews-support.lairdtech.com

www.lairdtech.com/wireless

Laird Technologies

Americas: +1-800-492-2320 Option 2

Europe: +44-1628-858-940

Hong Kong: +852-2268-6567 x026

PIN DEFINITIONS

Table 5: Pin Definitions

Name

I/O

Default

State

Ref.

Description

If Unused

1 GND

Ground

Must be

connected to

GND

2 No Connect - - No internal connection. Leave it open Leave open

3 BT_PRIORITY I Hi-Z VDD_IO 3-Wire Wi-Fi/BT coexistence signal

BT_PRIORITY for Bluetooth coexistence

4 No Connect - - No internal connection. Leave it open Leave open

5 No Connect - - No internal connection. Leave it open Leave open

6 No Connect - - No internal connection. Leave it open Leave open

7 No Connect - - No internal connection. Leave it open Leave open

8 No Connect - - No internal connection. Leave it open Leave open

9 No Connect - - No internal connection. Leave it open Leave open

10 No Connect - - No internal connection. Leave it open Leave open

11 No Connect - - No internal connection. Leave it open Leave open

12 No Connect - - No internal connection. Leave it open Leave open

13 VCC3_3 - 3.3 V Module Power

14 No Connect - - No internal connection. Leave it open Leave open

15 No Connect - - No internal connection. Leave it open Leave open

16 No Connect - - No internal connection. Leave it open Leave open

17 No Connect - - No internal connection. Leave it open Leave open

18 No Connect - - No internal connection. Leave it open Leave open

19 No Connect - - No internal connection. Leave it open Leave open

20 No Connect - - No internal connection. Leave it open Leave open

21 VDD_IO - I/O bus voltage configuration;

Either 3.3 V or 1.8 V

22 No Connect - - No internal connection. Leave it open Leave open

23 No Connect No internal connection. Leave it open Leave open

24 No Connect - - No internal connection. Leave it open Leave open

25 No Connect No internal connection. Leave it open Leave open

26 No Connect - - No internal connection. Leave it open Leave open

27 SDIO_DATA_2 I/O Pull-H VDD_IO

SDIO Data2

Note:

See “Integration Considerations” for additional

integration information.

28 WL_ACTIVE O Low VDD_IO

3-Wire Wi-Fi/BT coexistence signal;

WLAN_ACTIVE for Bluetooth

coexistence

29 VCC3_3 - 3.3 V Module Power

Inhaltsverzeichnis

Andere Laird Steuereinheit Handbücher

Laird

Laird SDC-CF20G Kurzanleitung zur Einrichtung

Laird

Laird BTM44 Series Kurzanleitung zur Einrichtung

Laird

Laird BT740-SA Kurzanleitung zur Einrichtung

Laird

Laird BT900-SA-0x Kurzanleitung zur Einrichtung

Laird

Laird BTM410 Kurzanleitung zur Einrichtung

Laird

Laird BL600 Series Montage- und Bedienungsanleitung

Laird

Laird BTM410 Bedienungsanleitung

Laird

Laird BTM420 Bedienungsanleitung

Laird

Laird MSD50NBT Bedienungsanleitung

Laird

Laird CL4790 Bedienungsanleitung

Laird

Laird SSD40NBT Kurzanleitung zur Einrichtung

Laird

Laird SDC-SSD30AG Kurzanleitung zur Einrichtung

Laird

Laird RM186 Kurzanleitung zur Einrichtung

Laird

Laird CF10G Kurzanleitung zur Einrichtung

Laird

Laird BTM521 Bedienungsanleitung

Laird

Laird BT800 series Kurzanleitung zur Einrichtung

Laird

Laird BL600-SA Kurzanleitung zur Einrichtung

Laird

Laird BTM430 Bedienungsanleitung

Laird

Laird BT800 series Kurzanleitung zur Einrichtung

Laird

Laird BTM510 Bedienungsanleitung

Laird

Laird LSR Sterling-LWB5 Bedienungsanleitung

Laird

Laird BT85 Series Bedienungsanleitung

Laird

Laird BT830 Kurzanleitung zur Einrichtung

Laird

Laird RM024 Kurzanleitung zur Einrichtung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung