Lamona LAM6380 Bedienungsanleitung

Generic instructions, (To be used in conjunction with User Instructions).

lPlease read this Installation Manual to ensure safe ﬁtting and use of the appliance.

lThe appliance should be ﬁtted by a suitably competent and qualiﬁed person.

lPlease keep these instructions in a safe place for future reference.

lDanger of suffocation keep packaging material away from children.

Installation Instructions

LAM6380

www.howdens.com/appliance-registration

Extra Tall Integrated Fridge Freezer

ISSUE v1.4 310723

At the heart of the kitchen

2www.howdens.com

40.5mm

Please use brackets with tabs to ensure fridge freezer

install depth is 40.5mm. (Use front feet adjustment to assist)

If installed deeper than 40.5mm (at either side) the fridge freezer

doors may not close fully causing issues such as:-

THE LIGHT WILL STAY ON

THE ALARM WILL SOUND (*Frost free models)

THE FRIDGE FREEZER WILL NOT WORK CORRECTLY

(Not cooling, icing-up, water leaking etc.)

Installation overview guide

1. Establish power socket location,

(must be accessible after installation)

2. Prepare cabinet,

(remove back panels) ..........................................p.5

3. Fit and adjust décor doors .....................................p.5

4. Fit side seal trim to fridge freezer...............................p.6

5. Protect cabinet edges with masking tape ......................p.7

6. Lift fridge freezer into cabinet ..................................p.7

7. Level and align fridge freezer using front adjustable feet and

spacer brackets ...............................................p.7-8

8. Fix spacer brackets to fridge freezer and when in

correct position screw to cabinet sides, (mid brackets then

upper brackets)................................................p.8

9. Make any ﬁnal feet adjustments to align fridge freezer to

brackets and ensure correct spacing depths ...................p.8

10. Tighten brackets to fridge freezer, (DO NOT over tighten)........p.8

11. Attach door sliders ............................................p.9

12. Remove bracket spacer tabs, install covers, screw cover caps ..p.9-10

A. Reverse fridge freezer doors if necessary ......................p.12-13

Exclusive to Howdens

TORX25

and

cross head

screw driver

DO NOT use high

speed impact

power tools.

2mm drill bit

Fridge freezer must

be ﬁxed securely

and level.

Do not install a

damaged appliance.

Two person lift.

Risk of injury:

Beware of metal

edges. Use gloves

when handling.

NOTE: If the electricity

cable is damaged it

must be replaced by a

competent person.

WARNING!

Do not use extension

cables / adapters.

WARNING!

This appliance must

be earthed.

The electric socket

must be accessible

after ﬁtting.

Safety Information

Installation

Tools required

Warning for injury or

property damage risk.

Warning for electric shock. Warning for risk of

ﬁre / ﬂammable materials.

Throughout this manual the following symbols are used.

4www.howdens.com

Upper bracket and ﬁxings

Upper bracket x1 x2 Middle bracket

Self drilling screw

3.5x9.5mm x2

Hex head thread cutting

screw 5x15mm

Hex head thread cutting

screw 5x15mm

Middle bracket and ﬁxings

Side sealing strip

Feet screws

Upper bracket screws

Door slider and ﬁxings Covers

Wood screw

4.2x13mm x2

Rail guide x 4

Cover x4

Door slider x4

Cover

x4 Upper hinge cover LH Upper hinge cover RH

Top trim cover x2 Screw hole plug x10

Reversable hinge cover x1

Wood screw

4.2x13mm

Wood screw

4.2x13mm

Wood screw

4.2x13mm

Wood screw

4.2x13mm

NOTE: Screw heads are Phillips size 2.

Parts supplied - DO NOT THROW AWAY!

Installation

Exclusive to Howdens

540mm

545mm

1939mm excluding trim

555mm

min

560mm

min

1984mm

200cm2 min

200cm

2 min

1966mm

Ensure the cabinet is

secure, level and true.

Approx

10mm

Howdens Kitchen Installation Manual

119mm119mm

Fit shelf ﬂush

to cabinet edge.

Cut to size.

1974mm (Stud position)

Plinth vent

must be ﬁtted.

Cabinet pre-build and airﬂow

IMPORTANT: Airﬂow around the fridge freezer

is essential. Ventilation channels must be free

of obstruction.

Ensure rear panel is removed.

6www.howdens.com

1 2

Measure and cut side seal to ﬁt

between bracket zones.

Apply seal, removing backing tape as you

progress. Start from the bottom edge.

DDD

Remove screw hole covers.

1156 mm685 mm

24mm

Loosely attach three spacer brackets.

Hex head 5x15mm 2x

x1 x2

Once ﬁtted, slide

them inboard.

Fit side seal trim

Exclusive to Howdens

The appliance should be leaning

slightly forward, this is normal.

90°

Ensure the fridge freezer is 40.5mm back from

the front edge of the cabinet.

Open doors, adjust feet so the appliance

stands vertially true and the top trim aligns

against the shelf.

To help adjust vertical alignment.

40.5mm Use air bags

to assist side

alignment.

Wood screw

4.2x13mm x2

1Protect base edge with masking tape.

2Carefully lift appliance into cabinet. Place rear feet

onto the base. Level, then gently slide into position.

Slide brackets

inwards to avoid

obstructions.

Make sure feet are loose and adjustable.

Inserting into cabinet

8www.howdens.com

The spacer brackets will set the appliance

to the correct depth of 40.5mm.

Carefully move the appliance and

adjust the two feet to obtain the

correct alignment (Use air bags to assist).

40.5mm

DO NOT fully tighten

brackets until spacing

and alignment is correct

(40.5mm).

The appliance should be set back 40.5mm from the front edge of the cabinet.

5 6

2Fix to cabinet sides

Wood screw 4.2x13mm x1

4Fix top trim

Wood screw

4.2x13mm x4

Hex head screw

5x15mm x2

Hex head screw

5x15mm x2

Fix to cabinet sides

Wood screw 4.2x13mm x1

NOTE: Screw heads are Phillips size 2.

Securing the fridge freezer (vertically true and level in cabinet).

Exclusive to Howdens

Attach door sliders

Punch or pilot drill the pre-marked holes on the appliance doors.

Self drilling screw 3.5x9.5mm x8

2Fix slider retainers to

the appliance doors

3Locate slider into the retainer and

align with decor door edge

21mm

Wood screw 4.2x13mm x8

4Mark, pilot and ﬁx sliders to decor doors

Carefully snap off the

distance spacing tabs

centre

Fit cover

NOTE: Screw heads are

Phillips size 2.

10 www.howdens.com

Fit trim cover

Slide on bracket cover

Fit bracket cover

Fit hinge cover

Fit screw caps where required.

Fit covers

Inhaltsverzeichnis

Andere Lamona Kühlschrank Handbücher

Lamona

Lamona LAM6300 Bedienungsanleitung

Lamona

Lamona HJA6312 Fehlerbehebungshandbuch

Lamona

Lamona FLM6351 Leitfaden

Lamona

Lamona FLM6300 Bedienungsanleitung

Lamona

Lamona HJA6853 Fehlerbehebungshandbuch

Lamona

Lamona LAM6701 Bedienungsanleitung

Lamona

Lamona LAM6702 Bedienungsanleitung

Lamona

Lamona LAM6050 Bedienungsanleitung

Lamona

Lamona LAM6800 Handbuch

Lamona

Lamona LAM 6700 Bedienungsanleitung

Lamona

Lamona LAM6000 Leitfaden

Lamona

Lamona FLM6307 Leitfaden

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung