lancer FS 30 Bedienungsanleitung
1CONTINUED ON NEXT PAGELancer PN: 28-3015
FS30, Mariani Video Merchandiser
Installation Kit
Instruction Sheet
The following illustrates how to remove the existing unit merchandiser and replace it with the
new Mariani Video Merchandiser for a FS30 unit.
Installation - New Merchandiser Assembly
Disconnect power from unit prior to servicing or
cleaning.
F WARNING
Steps5-6highlighthowtoremovetheuorescent
lighting components and Steps 7 - 8 highlight how to
remove the LED lighting components.
NOTE
1. Unplug unit power cord from wall outlet to power down
unit.
2. Remove the existing merchandiser by lifting straight up
and pulling away from the unit.
3. Using the pins towards the top of the reector
assembly, ip up the reector and lock in place.
4. Remove the cover panel from the unit control board.
5. Disconnect the uorescent reector harness from the
unit control board.
6. Unscrew the reector and remove from unit.
7. Disconnect the brown and blue wires of the LED driver
harness from the “Ballast” connection on the control
board.
8. Unscrew the reector and LED Driver Assembly and
remove from the unit
9. Remove the screw from the left and right side edge of
the unit.
2CONTINUED ON NEXT PAGELancer PN: 28-3015
More than likely, a grounded power strip will be
required for monitor to reach a grounded electrical
outlet.
NOTE
10. Position the new Merchandiser Frame in place,
starting at the top of the unit.
11. Slide the Merchandiser Frame into place with the
bottom of the frame sliding behind the valve plate.
12. Install new self-tapping screws into the existing screw
placements removed in Step 9.
13. Remove the Monitor Bracket from the Merchandiser
Frame by lifting up and pulling away from the frame.
14. Slide the top of the Monitor into the top of the Monitor
Bracket then place the bottom of the monitor into the
lower portion of the bracket.
15. Secure the Monitor Bracket to the back of the Monitor
using the screws and nuts included in kit.
16. With the new Monitor installed to the Monitor Brack-
et, re-install the Monitor Bracket to the Merchandiser
Frame.
17. Plug the Monitor power cord into the back of the
Monitor.
18. If the unit utilizes an ice-maker: Run the power cord
out the top of the Merchandiser Frame and alongside
the ice-maker then plug into a grounded electrical
outlet.
Keep the front ice bin lid installed during installation
and operation of the Monitor.
! ATTENTION
19. Alternatively, run the power cord down behind the
valve plate and splash plate and plug into a grounded
electrical outlet.
3CONTINUED ON NEXT PAGELancer PN: 28-3015
Uploading New Video Content
1. Using the key provided, unlock the Merchandiser
Frame and open to gain access to the monitor.
2. Turn on the screen by pressing the power button on
the remote provided.
Aim the remote at the remote sensor on the lower left
corner of the monitor for best accuracy.
NOTE
Once plugged in, the screen should show the video
leaswellasthenameoftheUSB,“CruzerGlide”.
NOTE
Once the copy function is complete, the screen should
nowshowtwo(2)ofthesamevideole.
NOTE
Oneofthevideolesonthescreenshoulddisappear
aftertheUSBdriveisremoved.
NOTE
Video will begin to play on a continuous loop, press
the back button to return to the menu.
NOTE
3. Once the screen has turned on, press the “Home” icon
button on the remote.
4. Use the arrows on the remote to navigate the Home
screen, and select the “Player” menu from the bottom
row of menu options.
8. Use the remote to scroll to the “Copy” icon, then press
OK.
9. Select the device “LG Signage Internal Storage” then
select the “Select” icon and press OK on the remote.
11. Remove the USB drive from the side of the monitor.
12. Use the remote to scroll to the “Continuous Play” icon,
then press OK.
15. Close the merchandiser frame and lock in place using
the key provided.
5. Plug the USB drive, containing the video le to be
loaded to the monitor, into the USB port on the top-left
side of the monitor.
6. Use the remote to scroll to the “Export” icon, then
press OK.
10. Select Yes on the “Single Item Selected. Copy Now?”
menu and press OK on the remote to begin the copy.
13. Select the video or videos you wish to play, then scroll
the “Play” icon and press OK.
14. Select No from the “Do you want to save Media to
Playlist?” menu then press OK.
7. Press OK on the remote to select the video to be
uploaded.
4
Lancer PN: 28-3015
Lancer Corp., 6655 Lancer Blvd., San Antonio, Texas 78219 - 800-729-1500 - Technical Support/Warranty: 800-729-1550
“Lancer” is the registered trademark of Lancer © 2018 by Lancer, all rights reserved.
Andere lancer Spender Handbücher
lancer
lancer 23300 Series Bedienungsanleitung
lancer
lancer DELTA III 9100 Series Bedienungsanleitung
lancer
lancer LEV FILL STATION Handbuch
lancer
lancer 2500 REMOTE series Bedienungsanleitung
lancer
lancer 2308 Series Handbuch
lancer
lancer bridge tower Bedienungsanleitung
lancer
lancer DROPIN 1522 Bargun Handbuch
lancer
lancer 800 series Handbuch
lancer
lancer TD 1700 series Handbuch
lancer
lancer CENTURIONII 85-0055 Handbuch
lancer
lancer 4400 Series Bedienungsanleitung
lancer
lancer Spartan Bedienungsanleitung
lancer
lancer 9000 series Bedienungsanleitung
lancer
lancer CoCo Fountain Tower Bedienungsanleitung
lancer
lancer 2200 Series Bedienungsanleitung
lancer
lancer Blue Star CB Series Bedienungsanleitung
lancer
lancer Sensation 44 Bedienungsanleitung
lancer
lancer 4500 Series Bedienungsanleitung
lancer
lancer Twin Pour Bedienungsanleitung
lancer
lancer TD 1700 series Bedienungsanleitung
