Landoll 345B Bedienungsanleitung

MODEL 345B

TRAILER

OPERATOR’S MANUAL

1900 North Street

Marysville, KS 66508

(785)562-5381

F-272-398 3/98

WARRANTY

MANUFACTURER’S GUARANTEE POLICY

LANDOLL CORPORATION WARRANTY

LANDOLL warrants each new and unused LANDOLL machine, when

properly assembled, adjusted, and operated, to be free of defects in

material and workmanship, in normal use and when properly serviced,

for a period of twelve (12) months after date of delivery by the Dealer to

the original retail purchaser. LANDOLL shall repair or replace, at its op-

tion, freight on board (f.o.b.) at its factory or designated DEALER loca-

tion, any part or parts of such new and unused machine which shall

have been reported in writing to LANDOLL within thirty (30) days from

date of failure thereof and which LANDOLL inspection shall disclose to

have been defective. Defective parts must be returned to the LANDOLL

factory, freight prepaid. LANDOLL will not be liable for labor, transpor-

tation, or any other charges resulting from replacement of a defective

part. This warranty is void if any part not supplied by LANDOLL is used

in assembly or repair, or if the machine has been altered, abused, or

neglected. LANDOLL repair parts are warranted for ninety (90) days

from date of replacement or for the unexpired warranty period of the

applicable LANDOLL machine, whichever period is longer. LANDOLL

makes no warranty, whatsoever, as to purchased component parts and

other trade accessories, except to the extent that such items are war-

ranted by the manufacturer thereof. THIS WARRANTY IS EXCLUSIVE

AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED,

IMPLIED, OR STATUTORY (INCLUDING WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR PURPOSE), AND LANDOLL SHALL NOT BE

LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND

ON ACCOUNT OF ANY LANDOLL PRODUCT.

NO EMPLOYEE OR REPRESENTATIVE IS AUTHORIZED TO CHANGE

THIS WARRANTY, VERBALLY OR IN WRITING, OR GRANT ANY OTHER

WARRANTY.

LANDOLL CORPORATION, WHOSE POLICY IS ONE OF CONTINUOUS

IMPROVEMENT, RESERVES THE RIGHT TO MAKE CHANGES WITHOUT

OBLIGATION TO MODIFY PREVIOUSLY PRODUCED EQUIPMENT.

MODEL 345B

TRAILER

OPERATOR’S MANUAL

PURCHASED FROM: DATE / /

ADDRESS:

PHONE NO.: SERIAL NO.:

REPORTING SAFETY DEFECTS

If you believe that your vehicle has a defect which could cause a crash or could

cause injury or death, you should immediately inform the National Highway Traffic

Safety Administration (NHTSA) in addition to notifying Landoll Manufacturing.

If NHTSA receives similar complaints, it may open an investigation, and if it

finds that a safety defect exists in a group of vehicles, it may order a recall and

remedy campaign. However, NHTSA cannot become involved in individual prob-

lems between you, your dealer, or Landoll Manufacturing.

To contact NHTSA, you may either call the Auto Safety Hotline toll-free at 1-800-

424-9393 (or 366-0123 in Washington, D.C. area) or write to: NHTSA, U.S. Depart-

ment of Transportation, Washington, D.C. 20590. You can also obtain other infor-

mation about motor vehicle safety from the Hotline.

In the event of a defect or problem with your LANDOLL equipment, please notify

LANDOLL CORPORATION:

LANDOLL CORPORATION

SALES AND SERVICE

1900 NORTH STREET

MARYSVILLE, KANSAS 66508

OR PHONE:

(785) 562-5381

1-800-HAULOLL

(1-800-428-5655)

FAX NO.: (785) 562-4893

TABLE OF CONTENTS

SECTION DESCRIPTION PAGE NO.

1 INTRODUCTION ........................................1-1

2 STANDARD SPECIFICATIONS .............................2-1

3 OPERATING INSTRUCTIONS ..............................3-1

3-1 GENERAL ...........................................3-1

3-2 PRE-COUPLING OF TRAILER AND TRUCK ..................3-2

3-3 COUPLING OF THE TOWING VEHICLE TO THE TRAILER.......3-3

3-4 CONNECTING TOWING VEHICLE SERVICES TO THE TRAILER . . 3-3

3-5 TOWING VEHICLE AND TRAILER HOOK-UP AND CHECK-OUT . . 3-3

3-6 TOWING THE TRAILER .................................3-4

3-7 PARKING THE TRAILER ................................3-5

3-8 UNCOUPLING TOWING VEHICLE FROM TRAILER ............3-5

3-9 WINCHCONTROLS....................................3-6

3-10 AXLE CONTROL LEVER ................................3-7

3-11 TRAILER TILT LEVER ..................................3-7

3-12 LOADING THE TRAILER ................................3-8

3-13 UNLOADING THE TRAILER ..............................3-9

3-14 AUXILIARY HYDRAULIC POWER ENGINE OPERATION .......3-12

3-15 DOCK LEVELER CONTROL.............................3-13

3-16 REAR IMPACT GUARD SYSTEM .........................3-15

3-17 ANTI-LOCK BRAKE SYSTEM (ABS) ......................3-15

3-18 REMOTE OPERATION .................................3-16

3-19 COLD WEATHER OPERATION ..........................3-16

3-20 HOT WEATHER OPERATION............................3-17

4 MAINTENANCE AND LUBRICATION ........................4-1

4-1 MAINTENANCE SCHEDULE .............................4-1

4-2 MAINTENANCE PROCEDURES ...........................4-4

4-3 HITCH, FRAME, AND DECK..............................4-4

4-4 HYDRAULIC SYSTEM ..................................4-8

4-5 ELECTRICAL SYSTEM .................................4-8

4-6 SUSPENSION MAINTENANCE ............................4-9

4-7 ALIGNMENT ........................................4-10

4-8 BRAKE SYSTEM MAINTENANCE ........................4-13

4-9 HUB AND DRUM MAINTENANCE ........................4-19

4-10 WHEEL BEARING LUBRICATION AND ADJUSTMENT.........4-22

4-11 TIRE MAINTENANCE ..................................4-23

4-12 WINCHES ..........................................4-26

5 TROUBLESHOOTING....................................5-1

SAFETY PRECAUTIONS

THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU

TO POTENTIAL INJURY HAZARDS. OBEY ALL SAFETY MESSAGES

THAT FOLLOW THIS SYMBOL TO AVOID POSSIBLE INJURY OR

DEATH.

DANGER DANGER INDICATES AN IMMINENTLY HAZARDOUS SITUA-

TION WHICH, IF NOT AVOIDED, WILL RESULT IN DEATH OR

SERIOUS INJURY.

WARNING WARNING INDICATES A POTENTIALLY HAZARDOUS SITUA-

TION WHICH, IF NOT AVOIDED, COULD RESULT IN DEATH OR

SERIOUS INJURY.

CAUTION CAUTION INDICATES A POTENTIALLY HAZARDOUS SITUA-

TION WHICH, IF NOT AVOIDED, MAY RESULT IN MINOR OR

MODERATE INJURY.

CAUTION CAUTION USED WITHOUT THE SAFETY ALERT SYMBOL INDI-

CATES A POTENTIALLY HAZARDOUS SITUATION WHICH, IF

NOT AVOIDED, MAY RESULT IN PROPERTY DAMAGE.

iii

1INTRODUCTION

This manual provides operating, servicing, and maintenance instructions, for Model 345B trailer, manu-

factured by Landoll Corporation, Marysville, Kansas 66508.

SECTION 1 gives basic instructions on the use of this manual.

SECTION 2 gives specifications for the trailer, including measurements and component speci-

fications. A Standard Bolt Torque Table is provided to give guidelines for bolt

torques to be used when servicing this product.

SECTION 3 gives instructions for the proper operation of the equipment.

SECTION 4 gives general maintenance procedures, a maintenance schedule, and a lubrication

schedule. Improper maintenance will void your warranty.

IF YOU HAVE ANY QUESTIONS CONTACT:

LANDOLL CORPORATION

1900 NORTH STREET

MARYSVILLE, KANSAS 66508

or phone:

(785) 562-5381 or

(800) 428-5655

or FAX:

(785) 562-4893

SECTION 5 is a troubleshooting guide to aid in diagnosing and solving problems with the

trailer.

PARTS LIST is a separate manual showing the various assemblies, subassemblies, and sys-

tems. Refer to that manual when ordering Landoll replacement parts. Order parts

from your Landoll dealer.

WARRANTY The Warranty Registration form is located with the product documents. Fill it out

and mail it within 15 days of purchase. The Warranty is printed inside the front

cover.

NOTE: IMPROPER ASSEMBLY, MODIFICATION, OR MAINTENANCE OF YOUR

LANDOLL MACHINE CAN VOID YOUR WARRANTY.

COMMENTS Address comments or questions regarding this publication to:

LANDOLL CORPORATION

1900 NORTH STREET

MARYSVILLE, KANSAS 66508

ATTENTION: PUBLICATIONS - DEPT. 55

1-1

2STANDARD SPECIFICATIONS

CAPACITY*........................40,000 LB. DISTRIBUTED, 30,000 CONCENTRATED IN 10’

OVERALL LENGTH (WITH 48" HITCH): ...........................................35’2"

OVERALL WIDTH: ......................................................96" OR 102"

WEIGHT (102"WIDE, SPRING SUSPENSION, 7’ HITCH, WOOD DECK, 12M WINCH):....12,360 LBS.

HITCH: ..........................................PINTLE HOOK WITH HYDRAULIC TILT

LENGTH..................................................48", 60" OR 84"

HYDRAULIC TRAVELING AXLE: ................................................10’-6"

GROUND LOAD ANGLE: ........................................................ 9

DOCK LEVELER CAPACITY (OPTION): .......................................40,000 LB.

HYDRAULIC HOOKUP:

QUICK COUPLERS ...................................................1/2"

MAXIMUM OPERATING PRESSURE ..................................2500 PSI

OPERATING FLOW ...............................................17GPM

ELECTRICAL HOOKUP:...........................................7-WAY CONNECTOR

AIR HOOK UP: .......................................................GLAD HANDS

SPECIFIC BOLT TORQUES

AIR RIDE SUSPENSION:

EQUALIZER BEAM PIVOT AND ADAPTER BOLTS ....................800FT.-LBS.

SHOCK ABSORBER MOUNTING .................................150FT.-LBS.

AIR SPRING MOUNTING: 1/2" ....................................35FT.-LBS.

3/4" ....................................35FT.-LBS.

FOUR SPRING SUSPENSION:

AXLE CLAMP U-BOLTS........................................ 300FT.-LBS.

EQUALIZER BEAM PIVOT BOLT ..............................480-500 FT.-LBS.

TORQUE ARM BOLT ..........................................250FT.-LBS.

TORQUE ARM CLAMP NUTS .....................................60FT.-LBS.

WHEEL FASTENERS - ALL MODELS:

OUTER SPINDLE NUTS .....................................250-400 FT.-LBS.

PILOT WHEEL NUTS .......................................450-500 FT.-LBS.

DISK WHEEL INNER WHEEL NUTS ........................... 450-500 FT.-LBS.

DISK WHEEL OUTER WHEEL NUTS ...........................450-500 FT.-LBS.

SPOKE WHEEL NUTS ......................................200-250 FT.-LBS.

* CAPACITY RATINGS ARE FRAME CAPACITIES ONLY. ACTUAL LOAD CAPACITIES MAY BE RE-

STRICTED BY FACTORS SUCH AS GROSS AXLE WEIGHT RATINGS (GAWR) OR STATE AND FED-

ERAL REGULATIONS.

2-1

2-2

LANDOLL CORPORATION

GENERAL TORQUE SPECIFICATIONS (REV. 4/97)

THIS CHART PROVIDES TIGHTENING TORQUES FOR GENERAL PURPOSE APPLICATIONS WHEN SPECIAL TORQUES ARE NOT SPECIFIED

ON PROCESS OR DRAWING.

ASSEMBLY TORQUES APPLY TO PLATED NUTS AND CAPSCREWS ASSEMBLED WITHOUT SUPPLEMENTAL LUBRICATION (AS RECEIVED

CONDITION). THEY DO NOT APPLY IF SPECIAL GRAPHITE MOLY-DISULFIDE OR OTHER EXTREME PRESSURE LUBRICANTS ARE USED.

WHEN FASTENERS ARE DRY (SOLVENT CLEANED), ADD 33% TO AS RECEIVED CONDITION TORQUE.

BOLT HEAD IDENTIFICATION MARKS INDICATE GRADE AND MAY VARY FROM MANUFACTURER TO MANUFACTURER.

THICK NUTS MUST BE USED ON GRADE 8 CAPSCREWS.

USE VALUE IN [ ] IF USING PREVAILING TORQUE NUTS.

TORQUE IS SPECIFIED IN FOOT POUNDS

UNC

Size SAE

Grade

SAE

Grade

SAE

Grade

UNF

Size SAE

Grade

SAE

Grade

SAE

Grade

1/4-20 4 [5] 6 [7] 9 [11] 1/4-28 5 [6] 7 [9] 10 [12]

5/16-18 8 [10] 13 [16] 18 [22] 5/16-24 9 [11] 14 [17] 20 [25]

3/8-16 15 [19] 23 [29] 35 [43] 3/8-24 17 [21] 25 [31] 35 [44]

7/16-14 24 [30] 35 [43] 55 [62] 7/16-20 27 [34] 40 [50] 60 [75]

1/2-13 35 [43] 55 [62] 80 [100] 1/2-20 40 [50] 65 [81] 90 [112]

9/16-12 55 [62] 80 [100] 110 [137] 9/16-18 60 [75] 90 [112] 130 [162]

5/8-11 75 [94] 110 [137] 170 [212] 5/8-18 85 [106] 130 [162] 180 [225]

3/4-10 130 [162] 200 [250] 280 [350] 3/4-16 150 [188] 220 [275] 320 [400]

7/8-9 125 [156] 320 [400] 460 [575] 7/8-14 140 [175] 360 [450] 500 [625]

1-8 190 [237] 408 [506] 680 [850] 1-14 210 [263] 540 [675] 760 [950]

1-1/8-7 270 [337] 600 [750] 960 [1200] 1-1/8-12 300 [375] 660 [825] 1080 [1350]

1-1/4-7 380 [475] 840 [1050] 1426 [1782] 1-1/4-12 420 [525] 920 [1150] 1500 [1875]

1-3/8-6 490 [612] 110 [1375] 1780 [2225] 1-3/8-12 560 [700] 1260 [1575] 2010 [2512]

1/1-2-6 650 [812] 1460 [1825] 2360 [2950] 1/1-2-12 730 [912] 1640 [2050] 2660 [3325]

METRIC

COARSE THREAD METRIC CLASS 10.9 FASTENERS AND CLASS 10.0 NUTS AND THROUGH HARDENED FLAT WASHERS, PHOSPHATE

COATED, ROCKWELL C 38-45.

USE VALUE IN [ ] IF USING PREVAILING TORQUE NUTS.

Nominal

Thread

Diameter

Standard Torque Nominal

Thread

Diameter

Standard Torque

Newton-

Meters Foot-

Pounds Newton-

Meters Foot-

Pounds

6 10 [14] 7 [10] 20 385 [450] 290 [335]

7 16 [22] 12 [16] 24 670 [775] 500 [625]

8 23 [32] 17 [24] 27 980 [1105] 730 [825]

10 46 [60] 34 [47] 30 1330 [1470] 990 [1090]

12 80 [101] 60 [75] 33 1790 [1950] 1340 [1450]

14 125 [155] 90 [115] 36 2325 [2515] 1730 [1870]

16 200 [240] 150 [180] 39 3010 [3210] 2240 [2380]

18 275 [330] 205 [245]

Table 2-1 General Torque Specifications

Inhaltsverzeichnis

Andere Landoll Nutzfahrzeug Handbücher

Landoll

Landoll LT08 Series Bedienungsanleitung

Landoll

Landoll 900B Series Bedienungsanleitung

Landoll

Landoll 317B Bedienungsanleitung

Landoll

Landoll 345C Bedienungsanleitung

Landoll

Landoll 345D Bedienungsanleitung

Landoll

Landoll 825E Bedienungsanleitung

Landoll

Landoll 317C Bedienungsanleitung

Landoll

Landoll 600C Series Bedienungsanleitung

Landoll

Landoll LT10A Series Bedienungsanleitung

Landoll

Landoll L20 Series Bedienungsanleitung

Landoll

Landoll 855C HD Series Bedienungsanleitung

Landoll

Landoll 410 Series Bedienungsanleitung

Landoll

Landoll 330B Bedienungsanleitung

Landoll

Landoll 600A Series Bedienungsanleitung

Landoll

Landoll 900D Series Bedienungsanleitung

Landoll

Landoll 855E Series Bedienungsanleitung

Landoll

Landoll 825B Series Bedienungsanleitung

Landoll

Landoll 900 Series Bedienungsanleitung

Landoll

Landoll 318C Bedienungsanleitung

Landoll

Landoll 855 FINISHOLL Series Bedienungsanleitung

Landoll

Landoll 345F Bedienungsanleitung

Landoll

Landoll 353 Bedienungsanleitung

Landoll

Landoll 317D Bedienungsanleitung

Landoll

Landoll 340 Bedienungsanleitung

Beliebte Nutzfahrzeug Handbücher anderer Marken

Polaris

Polaris ACE 900 SP Bedienungsanleitung

TrailMax

TrailMax T-12-UR Bedienungsanleitung

Floe

Floe Cargo Max 9.5-73 Bedienungsanleitung

Toro

Toro 07277 Workman 2110 Bedienungsanleitung

Taylor-Dunn

Taylor-Dunn B0-050-00 Handbuch

Toro

Toro 133-7128 Bedienungsanleitung

Taylor-Dunn

Taylor-Dunn ET 3000 Bedienungsanleitung

Kayo

Kayo S70 Bedienungsanleitung

Range Road

Range Road RR608 Bedienungsanleitung

pronovost

pronovost PUMA-10000 Bedienungsanleitung

SSI SCHAEFER

SSI SCHAEFER WEASEL LITE Bedienungsanleitung

Club Car

Club Car TURF 272 2005 Handbuch

Toro

Toro 07059TC Bedienungsanleitung

Cushman

Cushman Turf Truckster 84069 Bedienungsanleitung

BERG

BERG Large Trailer Bedienungsanleitung

Cub Cadet

Cub Cadet Big Country 641 Bedienungsanleitung

Westward

Westward Go-4 XTR Bedienungsanleitung

Club Car

Club Car Carryall I 1999 Bedienungsanleitung