Laney CUB-SUPER Series Bedienungsanleitung

CUB-RANGE USER MANUAL

www.laney.co.uk

INTRODUCTION

Welcome to the CUB-SUPER range.

The CUB-SUPER range oers the tone conscious guitar player boutique tone without the boutique price

tag.

Time proven construction methods rened over 50 years of tube amp building and premium components

means that whilst the CUB-SUPER range appears deceptively simple they are reassuringly toneful. From

gently compressing cleans to touch sensitive crunches and full-on leads without a hint of harshness, it’s

dicult to nd a bad sound in the CUB-SUPER range.

The CUB-SUPER range was designed to free up space on your pedal board by ditching your boost pedal!

Why? Because the CUB-SUPER range has a superb BOOST pedal built into the front end of the circuit. It

works in exactly the same way as kicking in your favourite boost pedal on your board – it boosts your guitar

signal and hits the rst preamp tube in the amp….HARD, and as every guitar player should know hitting a

tube amp hard just makes everything sound better! So free some space and get more from your rig.

Available in 2 combo options, a head and 2 matching cabinet options, hand designed boutique aesthetics

and dynamic interactive tone is now available to everyone.

This manual explains the key features of your CUB-SUPER amp. Read it thoroughly and keep it safe for

future reference.

www.laney.co.uk

CUB-RANGE USER MANUAL

1 - POWER SWITCH & LAMP - Indicates that the amplier is powered up and ready to play.

2 - VOLUME - Controls the overall listening volume of the amplier and is used in conjunction with the

Gain control (6).

3 - TREBLE - Controls the amps high end response. Start at 4 or 5 and adjust depending on how dark or

bright you want the amplier to sound.

4 - MIDDLE - Controls the amps midrange response. Start at 4 or 5, lower settings will scoop the mids,

higher levels will allow you to actually hear the guitar in the mix.

5 - BASS - Controls the bass or bottom end of the amplier’s response. As the amp gets louder you may

want to back this o a bit. Start at 7-10 for bedroom volumes.

6 - GAIN - Controls the level of gain/distortion present in the guitar signal. Used in conjunction with the

volume control (2). For clean guitar sounds with plenty of headroom set the gain control low whilst

setting the volume control to the required level. As you dial more gain into the signal it might be

necessary to reduce the volume level accordingly.

7 - BOOST SWITCH - Engages the onboard pre-boost. This is just like kicking in your favourite boost pedal

in front of the amplier.

8 - BOOST KNOB - Dials in the amount of pre boost hitting the rst tube in the ampliers signal path.

Dialling in more BOOST will have the eect of pushing a clean amp into warm tube clipping or naturally

compressing an already clipping amplier.

1 2 3 4567810

CUB-SUPER10 FEATURES

CUB-RANGE USER MANUAL

www.laney.co.uk

9 - BOOST LED - Indicates that the BOOST is engaged.

10 - INPUT SOCKET - Plug a good quality guitar lead in here.

11 - EXTERNAL SPEAKER. - Your CUB-SUPER10 is loaded with a HH Custom designed 8 Ohm Internal

speaker. Should you want to run an external speaker cabinet it can be connected here. Please use a

good quality SPEAKER cable. Connecting an external speaker cabinet will disconnect the internal

speaker. Please make sure you use the correct impedance of speaker cabinet from 8 - 16 Ohms.

12 - FX LOOP SEND - This is where you plug the INPUT of your Eect(s). Use a high quality shielded

guitar cable. This socket can also be used as a line out.

13 - FX LOOP RETURN - This is where you plug the OUT of your Eect(s). Use a high quality shielded

guitar cable.

14 - FOOTSWITCH SOCKET - This is where you plug in the footswitch. FS1-Mini optional extra. Enables

remote switching of the boost circuit. Ensure the boost switch (7) is switched in.

15 - POWER SOCKET - Plug in the supplied IEC power cord here

11 12 13 14 15

CUB-SUPER10 FEATURES

www.laney.co.uk

CUB-RANGE USER MANUAL

1- POWER SWITCH & LAMP - Indicates that the amplier is powered up and ready to play.

2- VOLUME - Controls the overall listening volume of the amplier and is used in conjunction with the

Gain control (6).

3- REVERB - Sets the level of the on board reverb. The onboard reverb is a high-quality spring reverb

algorithm used in the acclaimed BCC-SECRET PATH reverb engine.

4- TREBLE - Controls the amps high end response. Start at 4 or 5 and adjust depending on how dark or

bright you want the amplier to sound.

5- MIDDLE - Controls the amps midrange response. Start at 4 or 5, lower settings will scoop the mids,

higher levels will allow you to actually hear the guitar in the mix.

6- BASS - Controls the bass or bottom end of the amplier’s response. As the amp gets louder you may

want to back this o a bit. Start at 7-10 for bedroom volumes.

7- GAIN - Controls the level of gain/distortion present in the guitar signal. Used in conjunction with the

volume control (2). For clean guitar sounds with plenty of headroom set the gain control low whilst

setting the volume control to the required level. As you dial more gain into the signal it might be

necessary to reduce the volume level accordingly.

8 - BOOST SWITCH - Engages the onboard pre-boost. This is just like kicking in your favourite boost pedal

in front of the amplier.

1 2 3 456789

CUB-SUPER12 FEATURES

1110

CUB-RANGE USER MANUAL

www.laney.co.uk

9 -BOOST - Determines the amount of pre boost hitting the rst tube in the ampliers signal path.

Dialling in more BOOST will have the eect of pushing a clean amp into warm tube clipping or

naturally compressing an already clipping amplier.

10 - BOOST LED - Indicates that the BOOST is engaged.

11 - INPUT SOCKET - 15W & <1W inputs. Plugging into the 15W input socket accesses the full power

of the amplier - producing 15 watts RMS of tube tone. Plugging into the <1Watt input switches the

output power stage down to <1 watt RMS. Ideal for recording or bedroom playing.

12 - EXTERNAL SPEAKER - Your CUB-SUPER12 is loaded with a HH Custom designed 8 Ohm Internal

speaker. Should you want to run an external speaker cabinet it can be connected here. Please use a

good quality SPEAKER cable. Connecting an external speaker cabinet will disconnect the internal

speaker. Please make sure you use the correct impedance of speaker cabinet from 8 - 16 Ohms.

13 - FX LOOP SEND - This is where you plug the INPUT of your Eect(s). Use a high quality shielded

guitar cable. This socket can also be used as a line out.

14 - FX LOOP RETURN - This is where you plug the OUT of your Eect(s). Use a high quality shielded

guitar cable.

15 - FOOTSWITCH SOCKET - This is where you plug in the footswitch. FS2-Mini optional extra. Enables

remote switching of the boost circuit and reverb. Ensure the boost switch (7) is switched in and the

reverb level is set above zero.

16 - POWER SOCKET - Plug in the supplied IEC power cord here.

1312 14 15 16

CUB-SUPER12 FEATURES

www.laney.co.uk

CUB-RANGE USER MANUAL

1 - INPUT SOCKET - 15W & <1W inputs. Plugging into the 15W input socket accesses the full power

of the amplier - producing 15 watts RMS of tube tone. Plugging into the <1Watt input switches the

output power stage down to <1Watt RMS. Ideal for recording or bedroom playing.

2- BOOST LED - Indicates that the BOOST is engaged.

3- BOOST - Determines the amount of pre boost hitting the rst tube in the ampliers signal path.

Dialling in more BOOST will have the eect of pushing a clean amp into warm tube clipping or

naturally compressing an already clipping amplier.

4- BOOST SWITCH - Engages the onboard pre-boost. This is just like kicking in your favourite boost

pedal in front of the amplier.

5- GAIN - Controls the level of gain/distortion present in the guitar signal. Used in conjunction with the

volume control (2). For clean guitar sounds with plenty of headroom set the gain control low whilst

setting the volume control to the required level. As you dial more gain into the signal it might be

necessary to reduce the volume level accordingly.

6- BASS - Controls the bass or bottom end of the amplier’s response. As the amp gets louder you may

want to back this o a bit. Start at 7-10 for bedroom volumes.

7- MIDDLE - Controls the amps midrange response. Start at 4 or 5, lower settings will scoop the mids,

higher levels will allow you to actually hear the guitar in the mix.

8- TREBLE - Controls the amps high end response. Start at 4 or 5 and adjust depending on how dark or

bright you want the amplier to sound.

1 3 4 5678910

CUB-SUPERTOP FEATURES

CUB-RANGE USER MANUAL

www.laney.co.uk

9-REVERB - Sets the level of the on board reverb. The on board reverb is a high-quality spring reverb

algorithm used in the acclaimed BCC-SECRET PATH reverb engine.

10 -VOLUME - Controls the overall listening volume of the amplier and is used in conjunction with the

Gain control (6).

11 - POWER SWITCH & LAMP - Indicates that the amplier is powered up and ready to play.

12 - POWER SOCKET - Plug in the supplied IEC power cord here

13 - FOOTSWITCH SOCKET - This is where you plug in the footswitch. FS2-Mini optional extra. Enables

remote switching of the boost circuit. Ensure the boost switch (7) is switched in.

14 - FX LOOP RETURN - This is where you plug the OUT of your Eect(s). Use a high quality shielded

guitar cable.

15 - FX LOOP SEND - This is where you plug the INPUT of your Eect(s). Use a high quality shielded

guitar cable. This socket can also be used as a line out.

16 - EXTERNAL SPEAKER. - Connect an external cabinet (8 - 16 Ohms) here. Please use a

good quality SPEAKER cable. Try the CUB-212 & CUB-112 cabinets.

1312 14 15 16

CUB-SUPERTOP FEATURES

www.laney.co.uk

CUB-RANGE USER MANUAL

Technical Specications

CUB-SUPER10

Product GUITAR Amplier

Power 10 Watts RMS

Channels Single Channel with FS Boost

Features Volume

Treble

Middle

Bass

Gain

Boost Switch

Boost

External Speaker socket

FX loop/LINE OUT send

FX Loop Return

Footswitch socket (FS1-MINI)

Speaker 1 x 10 HH Custom Designed Driver

Unit Size/mm 339x373x212 (HxWxD)

Unit Weight 9.6 Kg

Carton Size mm 430x440x275 (HxWxD)

Packed Weight 12.6 Kg

Power Consumption 50W

CUB-SUPER10

In the interest of continued product develoment, Laney reserve the right to amend product specication without prior notice

CUB-RANGE USER MANUAL

www.laney.co.uk

In the interest of continued product develoment, Laney reserve the right to amend product specication without prior notice

Technical Specications

CUB-SUPER12

Product GUITAR Amplier

Power <1 Watt - 15 Watts RMS

Channels Single Channel with FS Boost

Features Volume

Treble

Middle

Bass

Gain

Boost Switch

Boost

Reverb

External Speaker socket

FX loop/LINE OUT send

FX Loop Return

Footswitch socket (FS2-MINI)

Speaker 1 x 12 HH Custom Designed Driver

Unit Size/mm 399x430x233 (HxWxD)

Unit Weight 11.7 Kg

Carton Size mm 480x495x295 (HxWxD)

Packed Weight 15.5 Kg

CUB-SUPER12

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Laney Verstärker für Musikinstrumente Handbücher

Laney

Laney LA12C Bedienungsanleitung

Laney

Laney BC Series Bedienungsanleitung

Laney

Laney IRONHEART IRT60-212 Bedienungsanleitung

Laney

Laney TT50H Bedienungsanleitung

Laney

Laney GH100TI Bedienungsanleitung

Laney

Laney Audiohub Freestyle Bedienungsanleitung

Laney

Laney Richter Bass RB2 Bedienungsanleitung

Laney

Laney LR20 Bedienungsanleitung

Laney

Laney DP300 Bedienungsanleitung

Laney

Laney GS412LA Bedienungsanleitung

Laney

Laney IronHeart IRT15H Bedienungsanleitung

Laney

Laney IronHeart IRT60H Bedienungsanleitung

Laney

Laney AudioHub AH40 Bedienungsanleitung

Laney

Laney LX15 Bedienungsanleitung

Laney

Laney HCM15B Bedienungsanleitung

Laney

Laney LX120RH Bedienungsanleitung

Laney

Laney B1 Bedienungsanleitung

Laney

Laney RICHTER RBW100 Bedienungsanleitung

Laney

Laney Richer Bass RB1 Bedienungsanleitung

Laney

Laney LX120RTWIN Bedienungsanleitung

Laney

Laney LX15B Bedienungsanleitung

Laney

Laney CK300 Bedienungs- und Montageanleitung

Laney

Laney LC50-112 Bedienungsanleitung

Laney

Laney Iron heart Bedienungsanleitung

Beliebte Verstärker für Musikinstrumente Handbücher anderer Marken

Peavey

Peavey Wiggy Bedienungsanleitung

acus

acus One Forstreet 10 Bedienungsanleitung

Marshall Amplification

Marshall Amplification MG10KK Bedienungsanleitung

Pyle Pro

Pyle Pro PPG860A Bedienungsanleitung

Vox

Vox Pathfinder 15SMR Bedienungsanleitung

Marshall Amplification

Marshall Amplification JVM205C Bedienungsanleitung

Crate

Crate Professional BV-120H Bedienungsanleitung

Peavey

Peavey Basic 60 Bedienungsanleitung

Fender

Fender Bassman 1200 Bedienungsanleitung

ZT Club Bedienungsanleitung

Ibanez

Ibanez IFS2X Bedienungsanleitung

Crate

Crate GLX1200H Bedienungsanleitung

Laboga

Laboga THE BEAST Bedienungsanleitung

Falken1

Falken1 Traveller Pro Bedienungsanleitung

Hughes & Kettner

Hughes & Kettner Bass Kick 303 Bedienungsanleitung

Yamaha

Yamaha GA-10 Bedienungsanleitung

Engl

Engl Powerball-2 Service-Handbuch

Gibson

Gibson GA5WTR Kurzanleitung