Lang CLR36-H-U Betriebsanleitung
Lang Manufacturing Company 6500 Merrill Creek Parkway Everett, WA 98203
Phone: 425-349-2400 Fax: 425-349-2733
WWW.LANGWORLD.COM © Copyright 2000
Installation, Operation, Maintenance, & Troubleshooting
Model: CLR36-H-U Electric Cruise Line Hot Top Range
Serial:
2
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE.
READ, UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND
WARNINGS CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY
OTHER APPLIANCE.
WARNING: IMPROPER INSTALLATION, ADJUSTMENT,
ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE
PROPERTY DAMAGE, INJURY OR DEATH. READ THE
INSTALLATION, OPERATING AND MAINTENANCE
INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR
SERVICING THIS EQUIPMENT.
NOTICE: THIS EQUIPMENT IS APPROVED FOR INSTALLATION ONLY ON
VESSELS GREATER THAN 65 FEET IN LENGTH, IN ACCORDANCE WITH
USCG REGULATIONS IN TITLE 46 CFR 110-113. ANY WIRING USED IN
THE INSTALLATION OF THIS APPLAINCE MUST BE STRANDED COPPER.
3
TABLE OF CONTENTS
CHAPTER PAGE
1. TABLE OF CONTENTS ............................................................................... 3
2. READ FIRST ................................................................................................. 4
3. UNPACKING................................................................................................. 6
4. INSTALLATION ........................................................................................... 7
5. INITIAL START-UP ..................................................................................... 8
6. OPERATION.................................................................................................. 9
7. CLEANING PROCEDURES......................................................................... 10
8. TROUBLESHOOTING ................................................................................. 11
9. PARTS LISTS ................................................................................................ 13
10. EXPLODED VIEWS ..................................................................................... 15
11. WIRING DIAGRAMS ................................................................................... 21
12. WARRANTY ................................................................................................. 22
4
IMPORTANT READ FIRST IMPORTANT
CAUTION: THE RANGE WEIGHS 600 LBS. (272.16 KILOGRAMS).
FOR SAFE HANDLING, INSTALLER SHOULD OBTAIN
HELP AS NEEDED, OR EMPLOY APPROPRIATE
MATERIALS HANDLING EQUIPMENT (SUCH AS A
FORKLIFT, DOLLY, OR PALLET JACK) TO REMOVE
THE UNIT FROM THE SKID AND MOVE IT TO THE
PLACE OF INSTALLATION.
CAUTION: ANY STAND, COUNTER OR OTHER DEVICE ON
WHICH RANGE WILL BE LOCATED MUST BE
DESIGNED TO SUPPORT THE WEIGHT OF THE
RANGE (600 LBS.).
DANGER: THIS APPLIANCE MUST BE GROUNDED AT THE
TERMINAL PROVIDED. FAILURE TO GROUND THE
APPLIANCE COULD RESULT IN ELECTROCUTION
AND DEATH.
.
WARNING: INSTALLATION OF THE UNIT MUST BE DONE BY
PERSONNEL QUALIFIED TO WORK WITH
ELECTRICITY. IMPROPER INSTALLATION CAN
CAUSE INJURY TO PERSONNEL AND/OR DAMAGE
TO EQUIPMENT. UNIT MUST BE INSTALLED IN
ACCORDANCE WITH ALL APPLICABLE CODES.
NOTICE: The data plate is located behind the access cover to
the right of the oven door. The range voltage,
wattage, serial number, wire size, and clearance
specifications are on the data plate. This information
should be carefully read and understood before
proceeding with the installation.
NOTICE: The installation of any components such as a vent
hood, grease extractors, fire extinguisher systems,
must conform to their applicable National, State and
locally recognized installation standards.
CAUTION: ALWAYS KEEP THE AREA NEAR THE APPLIANCE
FREE FROM COMBUSTIBLE MATERIALS.
CAUTION: KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN
AND DRY. IF SPILLS OCCUR, CLEAN IMMEDIATELY,
TO AVOID THE DANGER OF SLIPS OR FALLS.
5
IMPORTANT READ FIRST IMPORTANT
WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS.
NEVER SPRAY OR HOSE CONTROL CONSOLE,
ELECTRICAL CONNECTIONS, ETC.
CAUTION: MOST CLEANERS ARE HARMFUL TO THE SKIN, EYES,
MUCOUS MEMBRANES AND CLOTHING.
PRECAUTIONS SHOULD BE TAKEN TO WEAR RUBBER
GLOVES, GOGGLES OR FACE SHIELD AND
PROTECTIVE CLOTHING. CAREFULLY READ THE
WARNING AND FOLLOW THE DIRECTIONS ON THE
LABEL OF THE CLEANER TO BE USED.
NOTICE: Service on this, or any other, LANG appliance must be
performed by qualified personnel only. Consult your
authorized service station directory or call the factory at
1-800-224-LANG (5264), or WWW.LANGWORLD.COM for
the service station nearest you.
WARNING: BOTH HIGH AND LOW VOLTAGES ARE PRESENT
INSIDE THIS APPLIANCE WHEN THE UNIT IS
PLUGGED/WIRED INTO A LIVE RECEPTACLE. BEFORE
REPLACING ANY PARTS, DISCONNECT THE UNIT
FROM THE ELECTRIC POWER SUPPLY.
CAUTION: USE OF ANY REPLACEMENT PARTS OTHER THAN
THOSE SUPPLIED BY LANG OR THEIR AUTHORIZED
DISTRIBUTORS CAN CAUSE BODILY INJURY TO THE
OPERATOR AND DAMAGE TO THE EQUIPMENT AND
WILL VOID ALL WARRANTIES.
6
UNPACKING
3.1 Receiving the Range
Upon receipt, check for freight damage, both visible and concealed. Visible
damage should be noted on the freight bill at the time of delivery and signed by the
carrier's agent. Concealed loss or damage means loss or damage, which does not
become apparent until the merchandise has been unpacked. If concealed loss or
damage is discovered upon unpacking, make a written request for inspection by the
carrier's agent within 15 days of delivery. All packing material should be kept for
inspection. Do not return damaged merchandise to Lang Manufacturing Company.
File your claim with the carrier.
3.2 Location
Prior to un-crating, move the range as near its intended location as practical. The
crating will help protect the unit from the physical damage normally associated
with moving it through hallways and doorways.
3.3 Un-crating
Uncrate range as close to installation location as possible. The range is packaged
on a pallet, wrapped in plastic to protect the unit from moisture and surrounded by
a wooden frame. Remove the wood crating carefully. Improper use of tools can
result in damage to the equipment. Remove and discard the plastic wrap.
Desiccant bags on top of the range should also be discarded. Protective paper on
top of the range may be left until the installation is complete.
The range is raised on blocks to enable ease of handling when removing from pallet
with forklift or straps. Use extreme care regardless of method used and be aware of
gravity center, especially with banks of multiple units.
PLEASE NOTE:
Legs, manuals, racks, rack slides, griddle cleaning tools, fryer smother covers and
remote overhead switch boxes, where applicable, are packed inside the oven cavity
and should remain there until the unit is at the final installation location.
Desiccant bags have been placed inside electrical cavity and must be removed
before operation.
CAUTION: RANGE WEIGHS 600 LBS (272.16 kilograms). FOR
SAFE HANDLING, INSTALLER SHOULD OBTAIN HELP
AS NEEDED, OR EMPLOY APPROPRIATE MATERIALS
HANDLING EQUIPMENT (SUCH AS A FORKLIFT,
DOLLY, OR PALLET JACK) TO REMOVE THE UNIT
FROM THE SKID AND MOVE IT TO THE PLACE OF
INSTALLATION.
CAUTION: ANY STAND, COUNTER OR OTHER DEVICE ON WHICH
RANGE WILL BE LOCATED MUST BE DESIGNED TO
SUPPORT THE WEIGHT OF THE RANGE (600 LBS.).
7
INSTALLATION
DANGER: THIS APPLIANCE MUST BE GROUNDED AT THE
TERMINAL PROVIDED. FAILURE TO GROUND THE
APPLIANCE COULD RESULT IN ELECTROCUTION AND
DEATH.
WARNING: INSTALLATION OF THE UNIT MUST BE DONE BY
PERSONNEL QUALIFIED TO WORK WITH ELECTRICITY.
IMPROPER INSTALLATION CAN CAUSE INJURY TO
PERSONNEL AND/OR DAMAGE TO EQUIPMENT. UNIT
MUST BE INSTALLED IN ACCORDANCE WITH ALL
APPLICABLE CODES.
NOTICE: The data plate is located behind the access cover to the
right of the oven door. The range voltage, wattage, serial
number, wire size, and clearance specifications are on the
data plate. This information should be carefully read and
understood before proceeding with the installation.
NOTICE: The installation of any components such as a vent hood,
grease extractors, fire extinguisher systems, must
conform to their applicable National, State and locally
recognized installation standards.
4.1 Electrical Connection
Electrical connection can be hooked into the bottom front, below the terminal
block, or at the right back of the unit behind the terminal block.
4.2 Range Voltage
The LangModel CLR36-H-U can be operatedon480Volts.
8
INITIAL START UP
5.1 PRE-POWER ON
Initial Start-up
Before the initial use of the range, the oven must be thoroughly allowed to dry
itself out. This is done be setting the thermostat to 350°. Allow the range oven to
heat until all vapor and condensation has been eliminated. For best results allow
the oven to thoroughly dry out. Allow 8 to 12 hours for this process. Clean top
plates thoroughly. Apply salad oil. Turn each plate thermostat to a low position
and allow plate to heat for three hours.
NOTICE: Somewhere along the rising temperature curve between
200°and 300°a moderate amount of smoke may issue from
in and around the Range. The smoke may be repeated
somewhere around 350°. Preservation oils and oil
accumulated during manufacturing may be coming off as
smoke in these temperature ranges. Do no be alarmed.
9
OPERATION
CAUTION: ALWAYS KEEP THE AREA NEAR THE APPLIANCE
FREE FROM COMBUSTIBLE MATERIALS.
CAUTION: KEEP FLOOR IN FRONT OF EQUIPMENT CLEAN AND
DRY. IF SPILLS OCCUR, CLEAN IMMEDIATELY, TO
AVOID THE DANGER OF SLIPS OR FALLS.
6.1 Range Controls
The hot top controls are, from front to back. The first set of knobs control the front
left and right. The second set of knobs control the rear left and right. Each section
has a 850°F thermostat. The oven temperature is controlled by a 550°F thermostat
that is located below the range top controls.
6.2 General Operation
The oven must be thoroughly preheated before satisfactory baking can be done.
The oven will not bake uniformly if not sufficiently preheated. After preheating let
the oven cycle 2 or 3 times to ensure complete heating of the entire oven cavity.
The “Roasting and Baking” oven is equipped with a removable rack. For baking
pies, bread, or for roasting operations, the rack may be placed directly on the metal
deck and the pans placed on the rack. For baking cakes or pastries the rack should
be located in the lower position provided by the rack supports at the sides of the
range and the pans placed on the rack in this lower position.
NOTE: Always place the pans symmetrically on the rack for best results. Keep the
oven door closed as much as possible. Excessive door opening will cool the front
section of the oven and products placed near the front are likely to bake slower. It
is desirable to keep the front edge of the pans at least several inches back from the
inside of the door (when closed). Do not permit air from a window or fan to blow
into the oven; it will cause uneven heating.
10
CLEANING
WARNING: KEEP WATER AND SOLUTIONS OUT OF CONTROLS.
NEVER SPRAY OR HOSE CONTROL CONSOLE,
ELECTRICAL CONNECTIONS, ETC.
CAUTION: MOST CLEANERS ARE HARMFUL TO THE SKIN,
EYES, MUCOUS MEMBRANES AND CLOTHING.
PRECAUTIONS SHOULD BE TAKEN TO WEAR
RUBBER GLOVES, GOGGLES OR FACE SHIELD AND
PROTECTIVE CLOTHING. CAREFULLY READ THE
WARNING AND FOLLOW THE DIRECTIONS ON THE
LABEL OF THE CLEANER TO BE USED.
7.1 After each meal Cleaning
Empty the grease drawer often or whenever it is 3/4 full. Remove the grease
drawer after each meal and wash the inside and outside of the drawer.
Keep the hot top surface clean.
Clean the exterior of the appliance with a hot water and chlorine solution to
maintain a gleaming appearance.
Be sure to rinse thoroughly and coat the cooking surface with a thin film of oil to
prevent rusting.
7.2 Daily
The range should be thoroughly cleaned at least once a day in addition to the
normal after meal cleaning to insure against the accumulation of foreign material.
Keep the inside of the oven and metal deck clean, particularly around door opening,
door edges and at bottom of door opening so that the door may close tightly.
Inhaltsverzeichnis
Andere Lang Reichweite Handbücher
Lang
Lang RTC36A-480VM Handbuch
Lang
Lang R60S-ATA Bedienungsanleitung
Lang
Lang RT36A Bedienungsanleitung
Lang
Lang 36S-20M-U Betriebsanleitung
Lang
Lang R30S Handbuch
Lang
Lang R60S Betriebsanleitung
Lang
Lang R60S Betriebsanleitung
Lang
Lang CLR36R-GB-S Betriebsanleitung
Lang
Lang CLCN36-H-S Betriebsanleitung
Lang
Lang 500S-A Bedienungsanleitung
