Lanner electronics MB-X66 Series Bedienungsanleitung

MB-X66 Series

Socket 370 Processor (support

Tualatin) Network Security Appliance

Control Board, 6x Realtek 8139C

10/100M BASE-T Ethernet

This document is copyrighted by the original manufacture. The original manufacturer

reserves the right to make modifications to the product(s) described in this manual at any

time without notice. This manual may not, in whole or in part, be photocopied,

reproduced, transcribed, translated, or transmitted in whatever form without the written

consent of the manufacturer, except for copies retained by the purchaser for backup

purposes. All rights are reserved.

TRADEMARKS

Pentiumis a registered trademark of Intel Corporation.

The following are trademarks or registered trademarks of their respective companies:

IBM, Intel, AMD, Cyrix, Award, AMI, S3, Microsoft, Windows, Windows NT, Novell, SCO,

PC/104, PICMG, ALI, UMC, SMC, Winbond. Products mentioned in this manual are for

identification purposes only. All names of products or services appearing in this manual

are the trademarks or registered trademarks of their respective organizations and

companies.

Ver. No. 1.0

LEI-UM-MB-X66 Series

Date: 2003/01/08

TABLE OF CONTENTS

CHAPTER 1INTRODUCTION 1

1.1 SPECIFICATIONS 2

1.2 PACKING CHECK LIST 3

CHAPTER 2JUMPER SETTING AND CONNECTORS 4

2.1 BOARD OUTLINE OF MB-X66 4

2.2 INSTALLING AND UPGRADING THE CPU 5

2.3 JUMPER SETTING OVERVIEW 7

2.4 JUMPER LOCATIONS FOR MB-X66 8

2.5 JUMPER SETTINGS SUMMARY FOR MB-X66 9

2.6 JUMPER SETTINGS FOR MB-X66 10

2.7 I/O CONNECTOR LOCATIONS FOR MB-X66 11

2.8 I/O CONNECTOR SUMMARY FOR MB-X66 12

2.9I/O CONNECTORS DESCRIPTION 13

CHAPTER 3AMI BIOS SETUP 21

3.1 RUNNING AMI BIOS 21

3.2 AMI BIOS HIFLEX Setup Utility 22

3.3 STANDARD CMOS SETUP 24

3.4 Advanced CMOS Setup 26

3.5 Advanced Chipset Setup 30

3.6 POWER MANAGEMENT SETUP 34

3.7 PERIPHERAL SETUP 36

3.8 PCI PLUG AND PLAY SETUP 38

3.9 Hardware Monitor Setup 41

3.10 Auto-Detect Hard Disks 42

3.11 CHANGE SUPERVISOR/USER PASSWORD 44

3.12 Load High Performance Setup Defaults 46

3.13 SAVE & EXIT SETUP 47

3.14 EXIT WITHOUT SAVING 48

TABLE OF CONTENTS

CHAPTER 4DRIVERS SUPPORT 49

4.1 USE YOUR DRIVER CD-ROM 49

4.2FILE DIRECTORY 49

APPENDIX A TECHNICAL REFERENCE 50

GLOSSARY 52

TERMS AND CONDITIONS 58

RMA SERVICE REQUEST FORM 59

~ 1~

CHAPTER 1.

INTRODUCTION

The MB-X66 Series is a Socket 370 Pentium III network control board with six 10/100

Base-TX Ethernet ports specifically designed for Ethernet connectivity. It is suitable for

SOHO (Small Office, Home Office), SMB (Small Medium Business), ROBO (Remote

Office, Branch Office), applicationsdevelopers, system integrators, and service

providers segments..

With the Intel Pentium ® III processor, the MB-X66 Series support up to a blazing 1.26

GHz, to provide high performance and meets the requirements of network platform

appliances.

Targeting on the rapid growing network platform market, the MB-X66 Seriescomes with

six Realtek 8139C 10/100M Base-T Ethernet chips.Designed with the Plug-and-Serve

concept in mind, theMB-X66 Series offers one 168-DIMM socket support up to 100/133

MHz SDRAM which provide full functionality and performance to be used "exactly"

where you need it as well. In addition ,one ATA mode CompactFlash type II socket used

in installing OS avoiding service disruption caused by hard disk's mechanical/magnetic

failures.

MB-X66 Serieshas many expansion functionssuch as one PCI and one 124-pin Mini-

PCIslot ,One 40-pin and One 44-pin IDE connector, both two IDE ports that support up

to four IDE devices and Ultra ATA/100/66/33 interface help designers and integrators

improve system performance by retrieving and sending data faster. For easy access,

MB-X66 Series has a 9-pin, RS-232 serial port for local system management,

maintenance, and diagnostics. Everything you could need is on-board.

INTRODUCTION

~ 2~

1.1 SPECIFICATIONS

οProcessor :IntelPentium III/CeleronProcessor in Socket

370(133 MHz), support B-stepping

οChipset :Intel815EP chipset, IT8712F I/O Chipset

οEthernet : Six Realtek 8139C 10/100M BASE-T Ethernet,6 X

connector.

οExpansion Bus A. One 124-pinMini-PCI slot

B. One PCI Slot

οSystem Memory/RAM :One 25º 168pin DIMM Socket, support PC-100/133

MHz SDRAM

οIDE Drive Interface: A. One 40-pin IDE connector that support Ultra ATA100,

build in secondary master IDE Channel

B. One 44-pin (2x22, 2mm) IDE connector that

support Ultra ATA100, build in secondary slave IDE

Channel

C. One CompactFlash type II socket, support ATA

mode, build in primary master IDE Channel

οBIOS :AMIlicensed BIOS

οI/O Connector :A. Six RJ-45 external connectors

B. One RS-232 DB-9 connector

οReserved pin-header :A. Keyboard/Mouse pin-header

B. LAN LED pin deader

C. Power/Status LED header

D. one parallel port pin header (for control LCM use)

E. One 1*4 pin-header (for control Keypad use)

οRTC :Internal RTC with Li battery

οOperating Temperature :0 °C~60 °C

οStorage Temperature : -20 °C~70 °C

οHumidity :5 %~95%RH, non-condensing

οPower :On-board 12 pins AT power connector

οVersion :MB-X66A: Six Realtek 8139C10/100M BASE-T

Ethernet Adapter

MB-X66B: Four Realtek 8139C10/100M BASE-T

Ethernet Adapter

INTRODUCTION

~ 3~

1.2 PACKING CHECK LIST

Inspect the product package for the following items before installation. If there is anything

missing, please contact our authorized reseller.

Item Qty Remark

MB-X66A1 pc MB-X66ANetwork Control Board

MB-X66B1 pc MB-X66BNetwork Control Board

~ 4~

JUMPER SETTING AND CONNECTORS

The figure below shows the jumpers and connectors location on the MB-X66 Series. The

PCB version may differ for slight changes without notice.

2.1 Board Outline of MB-X66 Series

CHAPTER 2.

DLA3

PKMB1

DLA1

PSA1

DLA2

DLA6

DLA4

COMA1

FDCA1

IDEA1

CF1

FAN1

PCIB1

CFSL1

PCIA1

IDEB1

CMOS1

LAN6

FAN2

DLA5

PLRS1

ATXC1

LEDE1

IRDA1

LAN5

LAN4

KPA1

Intel

LAN3

LAN2

LAN1

SBVA1

PSW1

COMB1

LCMA1

JUMPER SETTING AND CONNECTORS

~ 5~

2.2 INSTALLING AND UPGRADING THE CPU

To upgrade to a higher power CPU, simply remove the old CPU and install a new one.

Make sure to set the jumpers for the new CPU type and speed.

WARNING!

Disconnect the power cord from your system when you intend to

work on it or when you plan to open the chassis of your industrial

computer. Do not make connections when the power is turned on

because the sensitive electronic components could be damaged

by the sudden rush of power. Please only allow experienced

electronic technicians to do this job.

STATIC ELECTRICITY PRECAUTION!

aution! Computer components are very sensitive to damage

from static electric discharge. Always ground yourself to remove

static charge build-

up before touching the boards in the computer.

Use a grounding wrist strap at all times. Place all electronic

components on anti-static pad for static-

dissipation or in

static-shielded bag when they are not in the chassis.

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the

manufactur

er. Dispose of used batteries according to the battery

manufacturer’s instructions or accepted environmental regulatory

standards.

JUMPER SETTING AND CONNECTORS

~ 6~

INSTALLING THE DIMM MODULE:

A DIMM module simply snaps into a socket on the system board. Pin1 of the DIMM

module must correspond with Pin1 of the socket.

1.Pull the “tabs” which are at the ends of the socket to the side.

2.Position the DIMM above the socket with the “notches” in the module aligned with the

“keys” on the socket.

3.Seat the module vertically into the socket. Make sure it is completely seated. The tabs

will hold the DIMM in place.

Pin1 Notch

Key

TabTab

Inhaltsverzeichnis

Andere Lanner electronics Einplatinencomputer Handbücher

Lanner electronics

Lanner electronics IAC-H670 Series Bedienungsanleitung

Lanner electronics

Lanner electronics EM-660 Series Bedienungsanleitung

Lanner electronics

Lanner electronics AP-545L Bedienungsanleitung

Lanner electronics

Lanner electronics IAC-H668 Series Bedienungsanleitung

Lanner electronics

Lanner electronics AP-370VF Bedienungsanleitung

Lanner electronics

Lanner electronics EM-551Series Bedienungsanleitung

Lanner electronics

Lanner electronics EM-535 Series Bedienungsanleitung

Lanner electronics

Lanner electronics IAC-F694 Series Bedienungsanleitung

Lanner electronics

Lanner electronics EM-561 Series Bedienungsanleitung

Lanner electronics

Lanner electronics EM-9560 Series Bedienungsanleitung

Lanner electronics

Lanner electronics IAC-F847 Series Bedienungsanleitung

Lanner electronics

Lanner electronics PC/104 Single Board Computer with STPC Atlas CPU, and VGA, LCD, LAN, SSD, on-board RAM, 4xCOM,... Bedienungsanleitung

Lanner electronics

Lanner electronics EM-568 Series Bedienungsanleitung

Lanner electronics

Lanner electronics IAC-F845 Series Bedienungsanleitung

Beliebte Einplatinencomputer Handbücher anderer Marken

WIN Enterprises

WIN Enterprises PL-80910 Bedienungsanleitung

AXIOMTEK

AXIOMTEK SBC81206 Series Bedienungsanleitung

Embest

Embest SOM-PH8800 Bedienungsanleitung

SeaLevel

SeaLevel SBC-R9 Bedienungsanleitung

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Bedienungsanleitung

WinSystems

WinSystems PPM-LX800-G Bedienungsanleitung

GIGAIPC

GIGAIPC QBiX-PPC Series Bedienungsanleitung

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Bedienungsanleitung

Commell

Commell FS-978 Bedienungsanleitung

GIGAIPC

GIGAIPC QBiP-8665A/ Bedienungsanleitung

VersaLogic

VersaLogic Python EBX-11 Bedienungsanleitung

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Bedienungsanleitung

CompuLab

CompuLab SB-A510 Bedienungsanleitung

Boser

Boser HS-7321 Bedienungsanleitung

Premier Farnell

Premier Farnell Embest SBC8530 Bedienungsanleitung

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Bedienungsanleitung

Aaeon

Aaeon UP Bedienungsanleitung

Portwell

Portwell WUX Series Bedienungsanleitung