Lantech IPES-5416T Series Bedienungsanleitung

IPES/IES-5416T Series

16 10/100TX + 4 1000T L2+(w/8 or 16 PoE at/af) Industrial

Managed Switch w/ITU G.8032 Ring

User Manual (Hardware)

IP-67

IP-54

IP-43

Sept. 2017

Recommendation for Shielded network cables

STP cables have additional shielding material that is used to reduce external interference.

The shield also reduces the emission at any point in the path of the cable. Our

recommendation is to deploy an STP network cable in demanding electrical environments.

Examples of demanding indoor environments are where the network cable is located in

parallel with electrical mains supply cables or where large inductive loads such as motors

or contactors are in close vicinity to the camera or its cable. It is also mandatory to use an

STP cable where the power device (like IP camera) is used outdoors or where the network

cable is routed outdoors.

Important Notice

Lantech Communications Global, Inc. reserves the right to modify the

equipment, its specification or this manual without prior notice, in the interest

of improving performance, reliability, or servicing. At the time of publication

all data is correct for the operation of the equipment at the voltage and/or

temperature referred to. Performance data indicates typical values related to

the particular product.

No part of this documentation or information supplied may be divulged to any

third party without the express written consent of Lantech Communications

Global Inc. Products offered may contain software which is proprietary to

Lantech Communications Global Inc. The offer or supply of these products

and services does not include or infer any transfer of ownership.

Interference Issues

This Equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a

commercial or industrial installation. This equipment generates, uses, and

can radiate radio frequency energy. It may cause harmful interference to

radio communications if the equipment is not installed and used in

accordance with the instructions.

FCC Warning

This Equipment has been tested and found to comply with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy. It may cause harmful interference to radio

communications if the equipment is not installed and used in accordance

with the instructions. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CE Mark Warning

This is a Class-A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

Content

Chapter 1 Introduction.............................................5

Specification............................................................. 5

Chapter 2 Hardware Description ..........................14

2.1Physical Dimension...................................... 14

2.2 Package Content:......................................... 16

2.3 IP Protection................................................. 17

2.4 LED Indicators.............................................. 20

Chapter 3 Hardware Installation...........................22

Chapter 4 Network Application.............................28

4.1 ITU G.8032 Scheme...................................... 28

4.2 Ring Coupling................................................ 28

4.3 Multiple Rings................................................ 29

4.4 Dual Homing.................................................. 30

4.5 Chain............................................................. 30

Chapter 5 Console Management ..........................32

5.1 Connecting to the Console Port................... 32

5.2 Login in the Console Interface..................... 32

Chapter 1 Introduction

Lantech IES-5416T & IPES-5416T-8 (IP67/IP43) series is a high performance L2+

IP67/IP43 industrial Gigabit uplink switch with 8x10/100TX + 2 GigaT + 2Dual Speed

Giga FX (w/8 PoE at/af injectors-IPES model)by M12 connectors which provides L2 wire

speed and advanced security function for connecting PD network.

Specification

IES-5416T series

Standards

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX

IEEE802.3z Gigabit fiber

IEEE802.3x Flow Control and Back Pressure

IEEE802.3ad Port trunk with LACP

IEEE802.1d Spanning Tree

IEEE802.1w Rapid Spanning Tree

IEEE802.1s Multiple Spanning Tree

IEEE 802.3ad Link Aggregation Control Protocol (LACP)

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

IEEE 802.1X User Authentication (Radius)

IEEE802.1p Class of Service

IEEE802.1Q VLAN Tag

Switch

Architecture

Back-plane (Switching Fabric): 11.2Gbps

Packet throughput ability (Full-Duplex): 23.8Mpps @64bytes

Transfer Rate

14,880pps for Ethernet port

148,800pps for Fast Ethernet port

1,488,000pps for Gigabit Fiber Ethernet port

CPU

Marvell 800Mhz

RAM

256M Byte

Flash

128M Byte

Mac Address

16K MAC address table

Jumbo frame

10KB on all ports

Connectors

10/100TX: 16 x ports M12 4-pole D-coded with Auto MDI/MDI-X

function

10/100/1000T: 4 x ports M12 8-pole A-coded with Auto MDI/MDI-

X function (for –X model, is 4 x ports M12 8-pole X-coded with

Auto MDI/MDI-X function)

RS-232 connector: 1 x M12 5-pole A-coded

Power Input connector : 1 x M12 5-pole A-coded

Relay contact : 1 x M12 5-pole A-coded

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

Bypass

Protection**

High-speed optical switching (<4ms)

Minimal insertion loss (Max 1.6dB as Bypass Mode)

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red)

Ethernet port: Link/Activity (Green), Speed (Green)

DI/DO

1 Digital Input (DI) :

Level 0: -30~2V / Level 1: 10~30V

Max. input current:8mA

1 Digital Output(DO): Open collector to 40 VDC, 200mA

Operating

Humidity

5% ~ 95% (Non-condensing)

Operating

Temperature

-40°C~75°C / -40°F~167°F

(72V model: -40°C~60°C / -40°F~140°F)

Storage

Temperature

-40°C~85°C / -40°F~185°F

Power Supply

Standard model:9.5~60VDC dual input

72V model: 50.4~90VDC dual input

110V model : 43~137.5VDC dual input

Power

Consumption

Max. 13W 12V~48VDC input

Max. 16W 72VDC/ 110VDC input

Case

Dimension

IP67 model: Aluminum case

285mm(W)x200mm(H)x84.4mm(D)

IP43 model: Aluminum case

273mm(W)x187mm(H)x84.4mm(D)

Weight

2.1kgs(IP67); 1.8kgs (IP43)

Installation

DIN Rail** and Wall Mount Design

EMI & EMS

FCC Class A,

CE EN55022 Class A, CE EN55024, CE EN61000-4-2, CE

EN61000-4-3, CE EN61000-4-4, CE EN61000-4-5, CE EN61000-

4-6, CE N61000-4-8, EN61000-4-11

Stability Testing

IEC60068-2-32 (Free fall), EN61373 (Shock and Vibration)

MTBF

Verifications&

report

EN50155/EN50121-3-2/EN50121-4 verification

EN45545-2 R24 (EN ISO 4589-2, EN ISO 5659-2, NF X70-100-1

& 2) Fire & Smoke verification

Warranty

5 years

*Future release

**Optional

IPES-5416T-8 series

Standards

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX

IEEE802.3z Gigabit fiber

IEEE802.3x Flow Control and Back Pressure

IEEE802.3ad Port trunk with LACP

IEEE802.1d Spanning Tree

IEEE802.1w Rapid Spanning Tree

IEEE802.1s Multiple Spanning Tree

IEEE 802.3ad Link Aggregation Control Protocol (LACP)

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

IEEE 802.1X User Authentication (Radius)

IEEE802.1p Class of Service

IEEE802.1Q VLAN Tag

IEEE802.3at/af Power over Ethernet

Switch

Architecture

Back-plane (Switching Fabric): 11.2Gbps

Packet throughput ability (Full-Duplex): 23.8Mpps @64bytes

Transfer Rate

14,880pps for Ethernet port

148,800pps for Fast Ethernet port

1,488,000pps for Gigabit Fiber Ethernet port

CPU

Marvell 800Mhz

RAM

256M Byte

Flash

128M Byte

Mac Address

16K MAC address table

Jumbo frame

10KB on all ports

Connectors

10/100TX: 16 x ports M12 4-pole D-coded with Auto MDI/MDI-

X function

10/100/1000T: 4 x ports M12 8-pole A-coded with Auto

MDI/MDI-X function (for –X model, is 4 x ports M12 8-pole X-

coded with Auto MDI/MDI-X function)

RS-232 connector: 1 x M12 5-pole A-coded

Power Input connector : 1 x M23 5-pole A-coded

Relay contact : 1 x M12 5-pole A-coded

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

100Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E/ 6 cable

EIA/TIA-568 100-ohm (100m)

Bypass

Protection**

High-speed optical switching (<4ms)

Minimal insertion loss (Max 1.6dB as Bypass Mode)

Protocol

CSMA/CD

LED

Per unit: Power 1 (Green), Power 2 (Green), P-Fail (Red)

Ethernet port: Link/Activity (Green), Speed (Green); Optical

fiber: Link/Activity (Green)

DI/DO

1 Digital Input (DI) :

Level 0: -30~2V / Level 1: 10~30V

Max. input current:8mA

1 Digital Output(DO): Open collector to 40 VDC, 200mA

Operating

Humidity

5% ~ 95% (Non-condensing)

Operating

Temperature

-40°C~75°C / -40°F~167°F

(72V model: -40°C~60°C / -40°F~140°F)

Storage

Temperature

-40°C~85°C / -40°F~185°F

Power Supply

Standard model: 45~56VDC dual input

12V model: 9.5~57VDC dual input

72V model: 50.4~90VDC dual input

110V model: 43~137.5VDC dual input

PoE Budget

240W for 45~56V input ( 48V model)

(55V input is recommended for 802.3at 30W applications)

80W for 12V input (12V model)

120W for 24V input (12V model)

80W for 72V Input (72V model)

80W for 110V Input (110V model)

PoE pin

assignment

M12 port # 1~#8 support IEEE 802.3at/af End-point,

Alternative A mode. Per port provides 30W PoE at/ 15W PoE

af.

Power

Consumption

Max. 13W 12V~48VDC input

Max. 16W 72VDC/110VDC/WV input

Case Dimension

IP67 model: Aluminum case

285mm(W)x200mm(H)x84.4mm(D)

IP54 model: Aluminum case

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lantech Schalten Handbücher

Lantech

Lantech LPES-2208CA Bedienungsanleitung

Lantech

Lantech IES-3208C Bedienungsanleitung

Lantech

Lantech LES-2400-RPS Bedienungsanleitung

Lantech

Lantech IPGS-0016 Bedienungsanleitung

Lantech

Lantech IGS-2206C Bedienungsanleitung

Lantech

Lantech IPGS-0005T-4 Bedienungsanleitung

Lantech

Lantech 5 10/100TX w/ 4 PoE Injector Industrial... Bedienungsanleitung

Lantech

Lantech IPES-0104GT-4 Bedienungsanleitung

Lantech

Lantech IES-5408T Bedienungsanleitung

Lantech

Lantech IPGS-5008T Series Bedienungsanleitung

Lantech

Lantech IPES-5408T-X-IGN Series Bedienungsanleitung

Lantech

Lantech GE-800 Bedienungsanleitung

Lantech

Lantech IGS-3208MGSFP Bedienungsanleitung

Lantech

Lantech IGC-0101DSFP Bedienungsanleitung

Lantech

Lantech IPES-3424DSFP-2P-PT Bedienungsanleitung

Lantech

Lantech IES-0008-M12 Bedienungsanleitung

Lantech

Lantech IGS-L5408MGSFPR-AC Bedienungsanleitung

Lantech

Lantech IPGS-0005T-4-12V Bedienungsanleitung

Lantech

Lantech IES-5416DF Series Bedienungsanleitung

Lantech

Lantech IES-3416DSFP Bedienungsanleitung

Lantech

Lantech IES-5216DF Bedienungsanleitung

Lantech

Lantech IPES-3424DSFP-2P Bedienungsanleitung

Lantech

Lantech LGS-1104 Bedienungsanleitung

Lantech

Lantech TGS-R6616XFT Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung