Lantronix SecureLinx Bedienungsanleitung

Part Number 900-371

Revision C January 2009

SecureLinxTM SLP

Remote Power Manager

User Guide

be transmitted or reproduced in any form or by any means without the written

permission of Lantronix. Printed in the United States of America.

Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of

The Open Group. Windows 95, Windows 98, Windows 2000, and Windows NT are

trademarks of Microsoft Corp. Netscape is a trademark of Netscape Communications

Corporation.

Contacts

Lantronix Corporate Headquarters

15353 Barranca Parkway

Irvine, CA 92618, USA

Phone: 949-453-3990

Fax: 949-453-3995

Technical Support

Phone: 800-422-7044 or 949-453-7198

Fax: 949-450-7226

Online: www.lantronix.com/support

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix

web site at www.lantronix.com/about/contact.

Disclaimer & Revisions

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in

a residential area is likely to cause interference in which case the user will be

required to correct the interference at his or her own expense.

Instructions

This symbol is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

Dangerous Voltage

This symbol is intended to alert the user to the presence of un-insulated dangerous

voltage within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

Protective Grounding Terminal

This symbol indicates a terminal that must be connected to earth ground prior to

making any other connections to the equipment.

SecureLinx SLP Remote Power Manager 2

Life-Support Policy

As a general policy, Lantronix does not recommend the use of any of its products in

the following situations:

Life-support applications where failure or malfunction of the Lantronix product

can be reasonably expected to cause failure of the life-support device or to

significantly affect its safety or effectiveness.

Direct patient care.

Lantronix will not knowingly sell its products for use in such applications unless it

receives in writing assurances satisfactory to Lantronix that:

The risks of injury or damage have been minimized,

The customer assumes all such risks, and

The liability of Lantronix is adequately protected under the circumstances.

The term life-support device includes but is not limited to neonatal oxygen analyzers,

nerve stimulators (whether used for anesthesia, pain relief or other purposes), auto-

transfusion devices, blood pumps, defibrillators, arrhythmia detectors and alarms,

pacemakers, hemodialysis systems, peritoneal dialysis systems, neonatal ventilator

incubators, ventilators (for adults or infants), anesthesia ventilators, infusion pumps,

and any other devices designated as “critical” by the U.S. FDA.

The information in this guide may change without notice. The manufacturer assumes

no responsibility for any errors that may appear in this guide.

For the latest revision of this product document, please check our online

documentation at www.lantronix.com/support/documentation.html.

Date Rev. Comments

12/2004 A Initial Document

5/2006 B Part number changes related to RoHS.

1/2009 C Updated entire document, added RoHS changes.

SecureLinx SLP Remote Power Manager 3

Contents

1: Introduction 7

Features and Benefits ________________________________________________ 7

Communication Access Modes _____________________________________________ 7

Power Distribution _______________________________________________________ 7

Load and Environment Measurement ________________________________________ 7

Power-up Sequencing ____________________________________________________ 7

Outlet Grouping _________________________________________________________ 8

Security _______________________________________________________________ 8

User Interfaces and LEDs _________________________________________________ 8

Automatic Timeout _______________________________________________________ 8

2: Installation 9

Standard Accessories ________________________________________________ 9

Equipment Overview _________________________________________________ 9

Safety Precautions__________________________________________________ 10

Installing the Power Input Retention Bracket ______________________________ 11

Mounting _________________________________________________________ 11

Horizontal/Rack ________________________________________________________ 11

Vertical _______________________________________________________________ 11

Connecting to the Power Source _______________________________________ 12

Connecting Devices _________________________________________________ 12

Connecting to a local Personal Computer (PC) ____________________________ 12

Serial (RS-232) port _____________________________________________________ 12

Ethernet port___________________________________________________________ 12

3: Operations 14

User Interfaces_____________________________________________________ 14

Outlet Naming and Grouping ______________________________________________ 14

Usernames and Passwords _______________________________________________ 14

Web Browser Interface ______________________________________________ 14

Logging In_____________________________________________________________ 15

Outlet Control __________________________________________________________ 15

Environmental Monitoring ________________________________________________ 17

TACACS+_____________________________________________________________ 29

Email ________________________________________________________________ 31

Tools_________________________________________________________________ 31

SecureLinx SLP Remote Power Manager 4

Contents

Command Line Interface _____________________________________________ 33

Logging In _____________________________________________________________ 33

Operations Commands ___________________________________________________ 36

Administration Commands ________________________________________________ 42

4: Advanced Operations 65

SSL _____________________________________________________________ 65

Enabling and Setting up SSL Support _______________________________________ 65

SSL Technical Specifications ______________________________________________ 66

SSH _____________________________________________________________ 66

Enabling and Setting up SSH Support _______________________________________ 67

SSH Technical Specifications ______________________________________________ 67

SNMP ___________________________________________________________ 68

Enabling and Setting up SNMP Support______________________________________ 68

SNMP Traps ___________________________________________________________ 71

Configuring Traps _______________________________________________________ 73

LDAP ____________________________________________________________ 76

Logging __________________________________________________________ 93

5: Troubleshooting and Technical Support 98

Technical Support __________________________________________________ 98

A: Resetting to Factory Defaults 99

B: Uploading Firmware 001

C: Technical Specifications 01

Models__________________________________________________________ 101

Data Connections _________________________________________________ 103

RS-232 port___________________________________________________________ 103

RJ45 to DB9F serial port adapter __________________________________________ 103

Ethernet LED Indicators ____________________________________________ 104

Outlet LED Indicators ______________________________________________ 104

Temperature/Humidity Probe (Accessory)_______________________________ 105

D: Compliance Information 06

Warranty ________________________________________________________ 107

SecureLinx SLP Remote Power Manager 5

Contents

List of Figures

Figure 2-1. SLP Hardware View________________________________________ 10

Figure 2-2. Retention Bracket Assembly _________________________________ 11

Figure 3-1. Web Browser Interface _____________________________________ 15

List of Tables

Table 3-1. Outlet State/Control State Field Values _________________________ 16

Table 3-2. Operations Command Summary ______________________________ 34

Table 3-3. Administrative Command Summary ____________________________ 34

Table 4-1. SSL Command Summary ____________________________________ 65

Table 4-2. SSH Command Summary____________________________________ 66

Table 4-3. SNMP Command Summary __________________________________ 68

Table 4-4. Trap Summary ____________________________________________ 71

Table 4-5. Unit Status Traps __________________________________________ 72

Table 4-6. Infeed Status Traps ________________________________________ 72

Table 4-7. Outlet Status Traps_________________________________________ 72

Table 4-8. Load Traps _______________________________________________ 73

Table 4-9. SNMP Trap Command Summary ______________________________ 73

Table C-5-1. Vertical Installation ______________________________________ 101

Table C-5-2. Vertical Expansion Unit___________________________________ 101

Table C-5-3. Horizontal/Rack Installation _______________________________ 101

Table C-5-4. Horizontal/Rack Expansion Unit____________________________ 101

Table C-5-5. Power Ratings _________________________________________ 101

Table C-5-6. Physical Specifications ___________________________________ 103

Table C-5-7. RS-232 Port ___________________________________________ 103

Table C-5-8. RJ45 to DB9 Serial Port Adapter ___________________________ 104

Table C-5-9. LED Description ________________________________________ 104

Table C-5-10. Temperature/Humidity Probe Technical Specifications__________ 105

SecureLinx SLP Remote Power Manager 6

1: Introduction

The Lantronix SLP Remote Power Manager family of products provides easy,

practical, and secure solutions for power distribution, power management and load-

measurement for remote equipment and branch AC circuits.

The SLP Remote Power Manager supports the elimination of unnecessary trips to

remote locations by allowing remote control of the power on/off status for distant

critical equipment, minimizing the impact of locked-up devices on mission-critical

systems.

Features and Benefits

SLP models are available in 8-outlet and 16-outlet configurations for 100-120VAC

and 208-240VAC up to 16A. Expansion models are available in 8-outlet and 16-

outlet configurations for 100-120VAC and 208-240VAC up to 16A. See Models on

page 101.

Communication Access Modes

All models are equipped standard with a RS-232 (serial) port and a 10/100 Base-T

Ethernet port for Telnet, Secure Shell (SSH), and web browser access.

Power Distribution

Up to 16A/24A of AC power (dependant on model) can be distributed across up to

sixteen attached devices. See Models on page 101 for available models.

Remote Power Management

Remote control of power outlets allows individual on/off and reboot control of up to 16

devices or up to 32 devices with the addition on an expansion unit.

Load and Environment Measurement

Load measurement eliminates guesswork by supplying the cumulative operating load

in amperes. This allows on-site technicians to maximize the equipment installed and

operated on a circuit without concern. Use of the circuit is maximized, while

effectively allowing a 10% to 20% safety margin. Remote users also may access this

information at any time from the command line or web browser interface.

Optionally, temperature and humidity sensors allow monitoring of key environmental

conditions at remote facilities.

Power-up Sequencing

SecureLinx SLP Remote Power Manager 7

1: Introduction

When powered on, each of the power outlets power sequentially with a two-second

delay between each outlet. Power sequencing staggers the individual loads,

eliminating the potential of a blown fuse or circuit breaker due to excessive in-rush

current and allows circuit support for operating load capacities of 80% to 90%.

Outlet Grouping

For operations across multiple attached devices or devices with multiple or redundant

power supplies, include outlets in one or more named groups of outlets. This allows

changes to all outlets in the named group with a single command sequence.

Security

Units ship with one predefined administrative user account. The administrator can

create up to 128 user accounts, with individualized access to outlets and commands.

All accounts support username and password protection. For configurations

requiring multiple fully-privileged users, the administrator can grant administrative

privileges to other user accounts in the system.

User Interfaces and LEDs

Two types of user interfaces are available: the web browser and the command line

interface. For easy outlet recognition, assign descriptive names to both individual

outlets and outlet groups for use in control commands. For the on-site technician,

LEDs indicate individual outlet power status and cumulative power load.

Automatic Timeout

For added security, a user session automatically terminates after five minutes of

inactivity; if a user is called away unexpectedly, an unprotected channel does not

remain open indefinitely.

SecureLinx SLP Remote Power Manager 8

2: Installation

Prior to installation, refer to the following lists to ensure that you have all the items

shipped with the unit as well as all other items required for proper installation.

Standard Accessories

Mounting bracket hardware:

Vertical (SLP-V, SLPY* models) – two removable flanges with four M4 screws

and two mounting L-brackets with two nut plates and four sets of screws and

washers

Horizontal/Rack (SLP-H, SLPX* models) – two mounting brackets and four

screws

RJ45 to RJ45 serial rollover cable

RJ45 to DB9F serial port adapter (for connection to standard DB9M DTE serial

port)

Outlet retention clips, one per outlet (208-240V units only)

Power input retention bracket hardware

Two removable T-brackets with two 40mm screws

Additional required Items:

Phillip screwdriver

Screws, washers and nuts to attach the SLP to your rack

Power input cord (purchased separately)

*SLPY, SLPX includes RJ12 link cable

Equipment Overview

The outlets are labeled 1 through 16. These numbers may be used in commands that

require an outlet name. See Outlet Naming and Grouping for more information. The

power inlet connects to the electrical power source. Figure 2-1 shows the hardware

features of the SLP.

Note: Models SLP-H8 and SLP-V16 are displayed in the following

illustration. Other models may have variations.

SecureLinx SLP Remote Power Manager 9

Andere Handbücher für SecureLinx

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lantronix Controller Handbücher

Lantronix

Lantronix SLB Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung