Lantronix PremierWave 2050 Kurzanleitung zur Einrichtung

Part Number 900-731-R

Revision E January 2019

PremierWave 2050

802.11ac Embedded Wi-Fi®IoT

Gateway Integration Guide

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 2

Intellectual Property

transmitted or reproduced in any form or by any means without the written permission of

Lantronix.

Lantronix and PremierWave are registered trademarks of Lantronix, Inc. in the United States

and other countries.

Patented: http://patents.lantronix.com; additional patents pending.

Wi-Fi is a registered trademark of Wi-Fi Alliance Corporation. Ethertronics is a trademark of

Ethertronics, Inc. Exar is a trademark of Exar Integrated Systems Corporation. SEMTECH is

a trademark of Semtech Corporation. All other trademarks and trade names are the property of

their respective holders.

Contacts

Lantronix, Inc.

7535 Irvine Center Drive, Suite 100

Irvine, CA 92618, USA

Toll Free: 800-526-8766

Phone: 949-453-3990

Fax: 949-453-3995

Technical Support

Online: www.lantronix.com/support

Sales Offices

For a current list of our domestic and international sales offices, go to the Lantronix web site at

www.lantronix.com/about/contact

Disclaimer

All information contained herein is provided “AS IS.” Lantronix undertakes no obligation to

update the information in this publication. Lantronix does not make, and specifically disclaims,

all warranties of any kind (express, implied or otherwise) regarding title, non-infringement,

fitness, quality, accuracy, completeness, usefulness, suitability or performance of the

information provided herein. Lantronix shall have no liability whatsoever to any user for any

damages, losses and causes of action (whether in contract or in tort or otherwise) in

connection with the user’s access or usage of any of the information or content contained

herein. The information and specifications contained in this document are subject to change

without notice.

This equipment has to be tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 3

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This device is intended only for OEM Integrators. The OEM integrator should be aware of the

following important considerations.

Labeling of the End Product

The label on the end product incorporating the PremierWave 2050 gateway must clearly state

that it contains an FCC-approved RF gateway. Canada and Japan also require a similar

statement.

For example, “This product contains RF transmitter ID # (put FCC, IC, CMIIT, and/or Japan

gateway grant numbers here).” The label must include the ID numbers for the regions where

the end product is installed. The grant numbers are below.



PremierWave 2050 FCC ID number: R68PW2050



PremierWave 2050 IC ID number: 3867A-PW2050



PremierWave 2050 Japan ID numbers: 201-152843



PremierWave 2050 China SRRC CMIIT ID: 2015AJ6847 (M)

RSS-GEN Sections 7.1.4 and 7.1.5 Statement for Devices with

Detachable Antennas

This device has been designed to operate with the antennas listed in the Certificate, and

having a maximum gain of 5.5 dBi. Antennas not included in this list or having a gain greater

than 5.5 dBi are strictly prohibited for use with this device, unless system level approval is

gained. The required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be

so chosen that the equivalent isotropically radiated power (EIRP) is not more than that

required for successful communication.

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 4

Integration Notes

This gateway is authorized under limited gateway approval specific to mobile host equipment.

The antenna must be installed with a 20 cm space maintained between the antenna and users.

The transmitter gateway may not be co-located with any other transmitter or antenna.

As long as the two conditions above are met, further transmitter testing will not be required.

However, the OEM integrator is still responsible for testing their end product for any additional

compliance requirements required with this gateway installed (for example, digital device

emission, PC peripheral requirements, etc.)

In the event that these conditions cannot be met (for example certain laptop configurations,

general purpose PCMCIA or similar cards, or co-location with another transmitter) and

obtaining a separate FCC authorization will be required, then the FCC authorization is no

longer considered valid and the FCC ID cannot be used on the final product (including the

transmitter).

Changes or modifications to this device not explicitly approved by Lantronix will void the user's

authority to operate this device.

Note: With the purchase of any PremierWave 2050 family product, the OEM agrees to an

OEM firmware license agreement that grants the OEM a non-exclusive, royalty-free

firmware license to use and distribute the binary firmware image provided, only to the

extent necessary to use the PremierWave 2050 hardware. For further details, please see

the PremierWave 2050 OEM firmware license agreement.

Note: Please refer to the PremierWave 2050 802.11ac Embedded Wi-Fi IoT Gateway

Datasheet, available at www.lantronix.com/support/documentation, for the full compliance

specification and requirements.

Warranty

For details on the Lantronix warranty policy, please go to our Web site at

www.lantronix.com/support/warranty.

Revision History

Date

Rev.

Comments

February 2016

Initial document.

May 2016

Added the “Sample Solder Process Using 5 Mil Stencil” section.

February 2017

Updated the DEFAULT#, WAKE and SHDN signal descriptions.

August 2017

Updated product label.

January 2019

Added the “Integrating Secure Element in Your Designs” section.

For the latest revision of this product document, please check our online documentation at

www.lantronix.com/support/documentation.

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 5

Table of Contents

Intellectual Property ________________________________________________________ 2

Contacts_________________________________________________________________ 2

Disclaimer________________________________________________________________ 2

Labeling of the End Product__________________________________________________ 3

RSS-GEN Sections 7.1.4 and 7.1.5 Statement for Devices with Detachable Antennas_____ 3

Integration Notes __________________________________________________________ 4

Warranty_________________________________________________________________ 4

Revision History ___________________________________________________________ 4

List of Figures_____________________________________________________________ 6

List of Tables _____________________________________________________________ 7

1: Introduction 8

About the Integration Guide __________________________________________________ 8

Additional Documentation____________________________________________________ 9

2: Functional Description 10

PremierWave 2050 Features ________________________________________________ 10

PremierWave 2050 Block Diagram ___________________________________________ 12

Signal Descriptions________________________________________________________ 13

Antenna Interface_________________________________________________________ 17

Antenna Placement _______________________________________________________ 18

Serial Interface___________________________________________________________ 19

Ethernet Interface_________________________________________________________ 22

USB Device Port _________________________________________________________ 24

USB Host Port ___________________________________________________________ 25

Integrating Secure Element in Your Designs ____________________________________ 26

LEDs___________________________________________________________________ 26

General Purpose I/O Pins___________________________________________________ 27

Reset Pins ______________________________________________________________ 27

3: PCB Footprint and the PW2050 Dimensions 29

Access CAD Files_________________________________________________________ 29

Reflow Profile Guideline____________________________________________________ 31

Sample Solder Process Using 5 Mil Stencil _____________________________________ 33

1. Introduction ________________________________________________________ 33

2. Scope_____________________________________________________________ 33

3. Assembly Process ___________________________________________________ 33

4. Solder Paste and Stencil Design ________________________________________ 33

5. Solder Paste Printing_________________________________________________ 33

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 6

6. Component placement________________________________________________ 35

7. Pre-Reflow Inspection ________________________________________________ 35

8. Reflow ____________________________________________________________ 38

9. Post Reflow Inspection _______________________________________________ 38

MSD (Moisture Sensitive Device) Control for the PW2050 Gateway__________________ 40

Product Information Label __________________________________________________ 41

Evaluation Board Schematic ________________________________________________ 42

List of Figures

Figure 2-1 PremierWave 2050 Dimensions and Views____________________________ 11

Figure 2-2 PremierWave 2050 Block Diagram __________________________________ 12

Figure 2-3 PremierWave 2050 Pin Locations ___________________________________ 16

Figure 2-4 Reverse-SMA to U.FL (Long) (Lantronix Part Number 500-180-R-ACC) _____ 18

Figure 2-5 U.FL to U.FL Cable (Lantronix Part Number 500-181-R-ACC)_____________ 18

Figure 2-6 Reverse-SMA to U.FL (short) (Lantronix Part Number 500-182-R-ACC) _____ 18

Figure 2-7 PW2050 Gateway with Chip Antenna Board Edge Mounting ______________ 19

Figure 2-8 Serial Port Example ______________________________________________ 21

Figure 2-9 Ethernet Connections to an External 10/100 RJ45 Magnetic Jack (J5)_______ 23

Figure 2-10 USB Device Interface Example (PremierWave 2050 Wi-Fi only)___________ 24

Figure 2-11 USB Host Interface Connections ___________________________________ 25

Figure 2-12 External Security Chip Connections_________________________________ 26

Figure 2-13 Recommended Use of SHDN Signal to Shut Off External Power Rail_______ 28

Figure 3-1 PremierWave 2050 Gateway Dimensions _____________________________ 29

Figure 3-2 PremierWave 2050 Recommended Footprint __________________________ 30

Figure 3-3 Recommended Reflow Profile ______________________________________ 32

Figure 3-4 SMT Process Flow _______________________________________________ 33

Figure 3-5 SPI Rectangle Pad 2876.5 mm Inspection Result _______________________ 34

Figure 3-6 SPI Square Pad 3850.7 mm Inspection Result__________________________ 35

Figure 3-7 X-Ray Machine Pre-Reflow Inspection ________________________________ 36

Figure 3-8 X-Ray Machine Post Reflow Inspection _______________________________ 38

Figure 3-9 PremierWave 2050 Product Label ___________________________________ 41

Figure 3-10 Evaluation Board Schematic (1 of 7) ________________________________ 42

Figure 3-11 Evaluation Board Schematic (2 of 7) ________________________________ 43

Figure 3-12 Evaluation Board Schematic (3 of 7) ________________________________ 44

Figure 3-13 Evaluation Board Schematic (4 of 7) ________________________________ 45

Figure 3-14 Evaluation Board Schematic (5 of 7) ________________________________ 46

Figure 3-15 Evaluation Board Schematic (6 of 7) ________________________________ 47

Figure 3-16 Evaluation Board Schematic (7 of 7) ________________________________ 48

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 7

List of Tables

Table 1-1 PremierWave 2050 Integration Guide Sections___________________________ 8

Table 2-1 PremierWave 2050 Part Numbers ___________________________________ 10

Table 2-2 PremierWave 2050 PCB Interface Signals _____________________________ 13

Table 2-3 PremierWave 2050 Wi-Fi On-Gateway Antenna_________________________ 17

Table 2-4 PremierWave 2050 Wi-Fi External Antenna Options via On-Gateway U.FL____ 17

Table 2-5 PremierWave 2050 Serial Port Signals________________________________ 20

Table 2-6 Example RS232 Connections (Serial Transceiver Required) _______________ 21

Table 2-7 Example RS422/485 Connections (Serial Transceiver Required)____________ 22

Table 2-8 Ethernet Port Signals _____________________________________________ 23

Table 2-9 USB Device Port Signals___________________________________________ 24

Table 2-10 USB Host Port Signals ___________________________________________ 25

Table 2-11 I2C Connections to External ATECC508A Device ______________________ 26

Table 2-12 PremierWave 2050 Wi-Fi Status LED Output Signals____________________ 26

Table 2-13 Ethernet Interface PremierWave 2050 Serial Port Signals ________________ 27

Table 2-14 PremierWave 2050 Reset Signals __________________________________ 27

Table 3-1 Oven Setting ____________________________________________________ 38

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 8

1:Introduction

About the Integration Guide

This user guide provides the information needed to integrate the Lantronix® PremierWave®

2050 family of products into customer-printed circuit boards. This manual is intended for

engineers responsible for integrating the PremierWave 2050 802.11ac Embedded Wi-Fi® IoT

Gateway into their product. This document provides instruction for connecting to the various

gateway pin function groups as well as general gateway placement and mounting. For

detailed technical and compliance specifications please refer to the PremierWave 2050

802.11ac Embedded Wi-Fi IoT Gateway Datasheet available at

www.lantronix.com/support/documentation.

The table below describes the integration guide sections.

Table 1-1 PremierWave 2050 Integration Guide Sections

Section

Description

PremierWave 2050 Features

Provides an overview of the gateway functions and mechanical drawing

PremierWave 2050 Block

Diagram

Shows the gateway functional blocks

Signal Descriptions

Provides signal descriptions and pinout information

Antenna Interface

Lists the antennas pre-certified for use with the gateway

Antenna Placement

Provides a general recommendation for antenna placement

Using the RF1 Signal Pin

This section is reserved for a future off gateway antenna connection

option

Serial Interface

Provides an example on how to connect the unit to external

RS232/485/422 networks

Ethernet Interface

Gives an example on how to connect the gateway Ethernet

USB Device Port

Provides an example on how to connect the unit up as a USB device

port

USB Host Port

Provides an example on how to connect the gateway USB host ports

LEDs

Describes the gateway LED connections

General Purpose IO Pins

Describes the gateway GPIO connections

Reset Pins

Describes the gateway RESET, DEFAULT, and WAKE pins

Mounting Instructions and

PCB Footprint

Provides the gateway PCB footprint and solder profile

Product Information Label

Provides an image and description of the unit label contents

Evaluation Board Schematic

Provides the PremierWave 2050 evaluation board schematic.

1: Introduction

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 9

Additional Documentation

Visit the Lantronix web site at www.lantronix.com/support/documentation for the latest

documentation and the following additional documentation.

Document

Description

PremierWave 2050 802.11ac

Embedded Wi-Fi IoT Gateway

Datasheet

Provides a unit description and all technical and compliance

specifications for the gateway

PremierWave 2050 802.11ac

Embedded Wi-Fi IoT Gateway

User Guide

Provides information needed to configure, use, and update the

PremierWave 2050 firmware.

PremierWave 2050 802.11ac

Embedded Wi-Fi IoT Gateway

Evaluation Kit Quick Start

Guide

Provides the steps for getting the PremierWave 2050 and

PremierWave 2050 evaluation kit up and running.

PremierWave 2050 802.11ac

Embedded Wi-Fi IoT Gateway

Evaluation Kit User Guide

Provides a detailed description of the PremierWave 2050 evaluation kit

hardware

Notification Soldering Profile

and Washing

Provides guidance in developing a manufacturing assembly process

for various Lantronix embedded products.

PremierWave® 2050 802.11ac Embedded Wi-Fi® IoT Gateway Integration Guide 10

2:Functional Description

Designed for quick integration with minimal engineering effort, the chip-sized PremierWave

2050 gateway provides simplicity and flexibility making it the easiest and fastest networking-

enabling gateway on the market.

PremierWave 2050 gateways are extremely compact networking solutions that enable

Ethernet or wireless connectivity on virtually any device with a serial interface. The included

industry-proven Lantronix gateway application and full IP stack allow seamless remote access

to device data simplifying design integration while providing robust connectivity.

The PremierWave 2050 gateway s can be utilized in designs typically intended for chip

solutions. A key difference with the PremierWave 2050 gateway is that there is virtually no

need to write a single line of code, translating to a much lower development cost and faster

time-to-market.

Table 2-1 PremierWave 2050 Part Numbers

Part Number

Description

PW205010001B

PremierWave 2050, 802.11ac embedded Wi-Fi IoT gateway, dual U.FL, ind.

temp, Bulk

PW205020001B

PremierWave 2050, 802.11ac embedded Wi-Fi IoT gateway, chip ant +U.FL,

ind. temp, Bulk

PW205010001S

PremierWave 2050, 802.11ac embedded Wi-Fi IoT gateway, dual U.FL, ind.

temp, Sample

PW205020001S

PremierWave 2050, 802.11ac embedded Wi-Fi IoT gateway, chip ant + U.FL,

ind. temp, Sample

PWGG2051000K

PremierWave 2050 evaluation Kit, 802.11ac embedded Wi-Fi IoT gateway, dual

U.FL

PWGG2052000K

PremierWave 2050 evaluation kit, 802.11ac embedded Wi-Fi IoT gateway, chip

ant

PremierWave 2050 Features

The PremierWave 2050 gateway is built around a 400 Mhz ARM9 processor with 32 MB of

DDR2 DRAM and 128 MB of embedded flash memory. Network connections are provided by

a dual band 802.11 ac/b/g/n WLAN radio and 10/100Mbps Ethernet MAC and PHY.

The PremierWave 2050 gateway also supports the following:



400 Mhz ARM9 CPU



32 MB DDR2 DRAM



128 MB NAND Flash



802.11 ac/bgn wireless with option for on gateway antenna or on gateway U.FL



On gateway 10/100 Mbps Ethernet MAC/PHY. External magnetic and RJ45 required.

Andere Handbücher für PremierWave 2050

Inhaltsverzeichnis

Andere Lantronix Tor Handbücher

Lantronix

Lantronix X303 Bedienungsanleitung

Lantronix

Lantronix PREMIERWAVE XC HSPA+ Bedienungsanleitung

Lantronix

Lantronix G528 Bedienungsanleitung

Lantronix

Lantronix EDS-MD Series Installationshandbuch

Lantronix

Lantronix G520 Series Bedienungsanleitung

Lantronix

Lantronix G526 Bedienungsanleitung

Lantronix

Lantronix PREMIERWAVE XC HSPA+ Bedienungsanleitung

Lantronix

Lantronix xPico 900-619 Kurzanleitung zur Einrichtung

Lantronix

Lantronix EMG 8500 Bedienungsanleitung

Lantronix

Lantronix X300 Bedienungsanleitung

Lantronix

Lantronix EMG 8500 Bedienungsanleitung

Lantronix

Lantronix X304 Bedienungsanleitung

Lantronix

Lantronix EMG 7500 Bedienungsanleitung

Lantronix

Lantronix X303 Bedienungsanleitung

Lantronix

Lantronix SGX 5150 Bedienungs- und Wartungsanleitung

Lantronix

Lantronix PREMIERWAVE XC HSPA+ Bedienungsanleitung

Lantronix

Lantronix SGX 5150 Installationshandbuch

Lantronix

Lantronix FOX3-2G Series Bedienungsanleitung

Lantronix

Lantronix PremierWave XC Installationshandbuch

Lantronix

Lantronix DeviceLinx XPort Direct Bedienungsanleitung

Lantronix

Lantronix PremierWave 2050 Bedienungsanleitung

Lantronix

Lantronix EMG 8500 Bedienungsanleitung

Lantronix

Lantronix PremierWave XN Bedienungsanleitung

Lantronix

Lantronix EMG Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung