Lantronix Series 1000 Bedienungsanleitung

Series 1000 User Manual

13 July 2001

Lightwave Communications, Inc.

100 Washington Street Milford, CT 06460 USA

(800) 871-9838 • (203) 878-9838 • Fax: (203) 874-0157

Email: [email protected] • Internet: www.lightwavecom.com

LCIAsia/Pacific

postal address: P.O. Box 19 GlenIris VIC 3146 Australia

delivery address: 16 Network Drive Port Melbourne VIC 3207 Australia

+61 3 9646 1144 • Fax: +61 3 9645 3377

Email: [email protected] • Internet: www.lightwavecom.com.au

LCI Europe

Zaubzerstraße 11 Munich D-81677 Germany

49-89-306-3810 • Fax: 49-89-306-3812

Email: [email protected] • Internet: www.lightwave.de

Table Of Contents Page

1.0 Matrix-Hub System Overview.......................................................................1

2.0 Matrix-Hub Components ...............................................................................2

2.1 Adding and Removing Cards...............................................................4

2.2 Replacing Failed Power Supplies.......................................................6

3.0 Video Cards.....................................................................................................7

4.0 Keyboard/Mouse Cards.................................................................................9

5.0 Serial Cards.....................................................................................................13

6.0 Switch and Control Cards .............................................................................16

7.0 Electroluminescent Display...........................................................................18

8.0 User Interface..................................................................................................21

8.1 Logging In...............................................................................................21

8.2 Help Menu..............................................................................................22

8.3 Chassis Commands..............................................................................22

8.4 Connection Commands........................................................................23

8.4.1 Serial Connections.............................................................................24

8.5 Entity Commands..................................................................................25

8.6 Macro Commands.................................................................................26

8.6.1 Autoexec Macro..................................................................................27

8.7 Password Commands...........................................................................27

Appendix A –Control Card Settings ....................................................................29

Appendix B –Pinouts .............................................................................................31

Appendix C –Sample Matrix-Hub Session.........................................................36

Matrix-Hub Series 1000 User Manual

13 July 2001

100 Washington Street, Milford, Ct, 06460, USA

written permission from Lightwave Communications, Inc.

1.0 Matrix-Hub System Overview

The Matrix-Hub Series 1000 is a matrix switch for the entire desktop. The switch

may route video, keyboard/mouse, and serial connections using an integrated

user interface. Each type of connection may be individually managed or may be

integrated to operate with one or both of the other connection types. The primary

function of the device is to permit up to ten attached users or destinations to gain

access to up to ten computers or sources. When used with the VDE/200

extension system from Lightwave, a versatile and highly flexible topology may be

created to maximize the effectiveness of both creative and high-performance

computer resources.

The Series 1000 chassis features redundant power supplies with separate AC

inputs, on-board cooling fans, and an electroluminescent display for easy access

to Matrix-Hub diagnostic and connection activity displays.

Each customer may decide how and by whom the Matrix-Hub will be controlled.

The matrix switchis controlled through a DB9 serial connector that may be

connected to a network, an attached server, an industry-standard controller (i.e.,

Dataton), or a plain ASCII terminal. The switch is capable of routing RGB video

signals to any number of destinations simultaneously, while keyboard/mouse and

serial signals are routed to single destinations only.

The Matrix-Hub Series 1000 may be configured according to customer

requirements. Each card type (video input and output, keyboard/mouse input

and output, and serial input and output) has five external ports per card. There

may be a maximum of two of each card for video input, keyboard/mouse input,

video output, and keyboard/mouse output. Serial cards can be combined in any

combination to fill the four chassis slots available for serial cards (i.e., a chassis

may have up to three serial input and one serial output cards, two input and two

output cards, or one input and three output cards).

The manual covers the card types, as well as the use of the front panel display,

the user interface, and the physical components of the chassis. Use of third-

party equipment is not covered in this manual.

2.0 Matrix-Hub Components

Each Series 1000 chassis consists of a metal enclosure, an electroluminescent

display, cooling fans, redundant power supplies with separate AC inputs, a

control card, three switch cards, and the user-specified signal input and output

cards.

The chassis is rack-mountable using the flanges on the front of the unit. If the

unit is to be rack-mounted, it is recommended that the rear of the unit is

supported within the rack using support brackets (available from Lightwave), and

allowance is made for adequate ventilation through the unit. The chassis may

also be used as a stand-alone unit, and is shipped with rubber feet attached to

allow airflow through the bottom of the unit when placed on a surface.

The electroluminescent front panel display allows access to the Matrix-Hub’s

internal diagnostic and connection displays (see section 7.0, Electroluminescent

Display).

The Series 1000 has redundant power supplies with separate AC inputs. Each

power supply is a set of two individual power supplies that provides separate

+5VDC and –5VDC. In ordinary operation, the two power supply sets share the

electrical current load equally. However, when one set fails, the other set can

provide all power for the unit. If the separate AC inputs are connected to

different AC sources, then the Matrix-Hub will not fail if one AC source fails. The

power supplies report their status through the front panel display and through the

user interface.

Power Supplies –Series 1000 Chassis

Front pair provides +5 VDC

Rear pair provides –5 VDC

Every chassis has three switch cards. Each switch card handles one element of

video signals (red, green, or blue), and two of the switch cards also handle

keyboard and mouse signals (serial signals are switched internally by the serial

cards and are not routed through the switch cards). All switch cards have a

temperature sensor that may be read through the front panel display or through

the user interface.

There is one control card in every chassis. The control card coordinates actions

within the chassis and provides a serial port for user interface and control.

Several attributes of the Matrix-Hub are user-defined and may be set using the

control card (see Appendix A, Control Card Settings).

The user-specified input and output cards allow individual users to access

computer resources through the matrix switch. One video input may be routed to

one or more video outputs, but keyboard/mouse and serial inputs may only be

routed to one output at a time. Inputs may be switched to outputs in whatever

groups of video, keyboard/mouse, and serial are required by the user.

Back of Matrix-Hub Series 1000 Chassis with All Cards

2.1 Adding and Removing Cards

Matrix-Hub cards may be purchased separately at any time to expand the

capacity or change the functionality of an existing unit. The user may add or

remove cards in the field quite easily, allowing for great flexibility of existing

systems.

All Matrix-Hub cards may be hot-swapped. It is not necessary to power-down the

unit when adding or removing cards.

When removing a card, use the two black plastic ejectors located at the topand

bottom of each card to help pull the card out of its slot. Push the tabs apart

vertically, and they will lever the card back out of its slot. The card may then be

slid out. If removing a switch card, be sure to first loosen the screws located

inside the metal frame attaching the plastic ejector tabs to the card. Loosen the

screws until the threads disengage from the chassis, but do not entirely remove

the screws from the card.

Switch Card Screws (Inside Top Ejectors)

When adding a card, first remove the blank panel covering the card slot by

loosening the screws located at the top and bottom of the panel. Insert the card

into the empty slot being sure to slide the card into the guides on the top and

bottom of the chassis. Push the card all the way in until the black plastic tabs

engage the edge rails on the top and bottom. Push the plastic ejector tabs

together vertically so the card is levered in to the slot and is firmly seated. If

resistance is encountered, removing an adjacent card and inserting both

simultaneously will often reduce the force required.

All cards for the Series 1000 have metal key tabs protruding along their inside

edge near the backplane connectors. These tabs prevent the insertion of

keyboard/mouse, serial, or control cards into slots designated for video or switch

cards. Video and switch cards require higher voltage than the other cards, so

accidental insertion of another card type into a video or switch slot would damage

that card.

Key Tabs –Series 1000 Cards

left –keyboard/mouse input & output, serial input & output, control

right –matrix switch, video input & output

2.2 Replacing Failed Power Supplies

If a power supply fails in a unit, it may be replaced in the field if necessary. Be

sure the failure is not due to a damaged power cord or a faulty outlet. The power

supplies are NOT hot swappable. Contact Lightwave Communications for more

instructions if the power supply must be replaced.

3.0 Video Cards

Video Input, Part Number 400.100.1001

Video Output, Part Number 400.100.1002

Video input cards (part number 400.100.1001) and video output cards (part

number 400.100.1002) are located in the four slots immediately surrounding the

switch cards, two to each side. The input cards are located to the left, while

output cards are located to the right. Ports are numbered from 1 to 10, starting at

the top outermost port, and ending at the bottom innermost port.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lantronix Schalten Handbücher

Lantronix

Lantronix SISPM1040-582-LRT Bedienungsanleitung

Lantronix

Lantronix Hub Bedienungsanleitung

Lantronix

Lantronix S8TB Bedienungsanleitung

Lantronix

Lantronix SISTP1040-551-LRT Bedienungsanleitung

Lantronix

Lantronix SM24T6DPA Bedienungsanleitung

Lantronix

Lantronix SLB088411-01 Bedienungsanleitung

Lantronix

Lantronix SESPM1040-541-LT Series Bedienungsanleitung

Lantronix

Lantronix Xpress-Pro SW 94000 Bedienungsanleitung

Lantronix

Lantronix SecureLinx Spider Bedienungsanleitung

Lantronix

Lantronix SM24TBT2DPA Bedienungsanleitung

Lantronix

Lantronix SM4T4DPA Bedienungsanleitung

Lantronix

Lantronix SM TAT4X Series Bedienungsanleitung

Lantronix

Lantronix SM8TAT2SA Bedienungsanleitung

Lantronix

Lantronix SISGM1040-284-LRT Bedienungsanleitung

Lantronix

Lantronix SM12XPA Bedienungsanleitung

Lantronix

Lantronix LSW2F8 Bedienungsanleitung

Lantronix

Lantronix LFH8-S Bedienungsanleitung

Lantronix

Lantronix SM24TBT2DPA Bedienungsanleitung

Lantronix

Lantronix LSS2200-8P Bedienungsanleitung

Lantronix

Lantronix SISTP10 0-3-LRT Series Bedienungsanleitung

Lantronix

Lantronix SM8TAT2SA Bedienungsanleitung

Lantronix

Lantronix SM24TBT2DPB Bedienungsanleitung

Lantronix

Lantronix LSS2200-8P Bedienungsanleitung

Lantronix

Lantronix SLS200USB0-02 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung