light (A, B, C, D), and the timing display
(3)willashtoshow“00”. At this time,
presstherecontrol“-“(15)or“+”(17)
keys to adjust the timer time, which will
be increased or decreased in unit of 1
minuteifitislessthan15minutes;in
unit of 5 minutes if it is between 15 mi-
nutesand40minutes;orinunitof10
minutes if it is between 40 minutes and
99minutes;Afterthekeystrokeopera-
tionisstopped,thetimingdisplaya-
shes for 5 seconds, then it turns to nor-
mal, the timing light ashes, and the
time countdown starts. When the timer
countdown is nished, the induction
cooker rings “beep” and it will shut
down automatically. Note: after setting
the timer of each burner, the timer di-
splay will show the minimum time set.
Check timer
When timer is in function, press the
“timer” key (16), the corresponding
burner timer light (A, B, C, D) will be
on,and thetimerdisplay willash to
display the current time.
Cancel timer function
When timer is in function, press the “ti-
mer” key (16), the corresponding bur-
ner timer light will be on, and the timer
displaywillashtodisplaythecurrent
time;presstherecontrol“-“(15)key
to adjust the timer to “00”, and the ti-
merdisplaywillashfor5secondsand
then go out, and the timer function will
be cancelled.
Note
A. After the induction cooker is shut
down, the fan will automatically delay
operation for 4 minutes to dissipate
heat.
B. When the centre temperature of the
Lapitec plate detected by NTC is higher
than 50 °C, the corresponding display
will show “H”.
C. When the used cooker is inconsi-
stent or the cooker is moved away from
the induction cooker, the heating will
stop, the power display (2, or 4, or 9,
or 10) will show “E”, and the timing di-
splay (3) will show “E1”. If the suitable
cooker is not put in within 10 seconds,
it will automatically shut down.
D.Inordertoensuretheeectofco-
oking, please use the special cooker for
this kind of induction cooker to cook.
E. When the induction cooker is used
and the voltage is too high (or too low),
the heating will stop, the power display
(2, or 4, or 9, or 10) will show “E”, and
the timing display (3) will show “E3” (or
“E2”). If the voltage does not return to
normal within 10 s, it will automatically
shut down. At this time, the induction
cooker will send out a warning beep,
pleaseturnothepowersupplyofthe
induction cooker.
15
User Manual English
INDULAP001
1 53 72 64 8 9Power/Level
Left front
Left rear
Right rear
Right front
Right Bridge
Left Bridge
100
(1000 W
on/o)
100
(1000 W
on/o)
100
(1000 W
on/o)
100
(1000 W
on/o)
200
(1400 W
on/o)
200
(1400 W
on/o)
800
(1000 W
on/o)
800
(1000 W
on/o)
800
(1000 W
on/o)
800
(1000 W
on/o)
400
(1000 W
on/o)
400
(1000 W
on/o)
400
(1000 W
on/o)
400
(1000 W
on/o)
600
(1400 W
on/o)
600
(1400 W
on/o)
1300
1200
1300
1200
2000
2000
300
(1000 W
on/o)
300
(1000 W
on/o)
300
(1000 W
on/o)
300
(1000 W
on/o)
400
(1400 W
on/o)
400
(1400 W
on/o)
1000
1000
1000
1000
1700
17001400
1400
500
(1000 W
on/o)
500
(1000 W
on/o)
500
(1000 W
on/o)
500
(1000 W
on/o)
1000
(1400 W
on/o)
1000
(1400 W
on/o)
1500
1400
1500
1400
2300
2300
2000
1600
2000
1600
2800
2800
14
Note:
Zone 1 and 2 (le front and rear) are using the sharing power electric, the max. power is 3500 W
Zone 3 and 4 (right rear and front) are using the sharing power electric, the max. power is 3500 W
Power o
To power of the cooking zone or co-
oktop use one of the following proce-
dures:
A. Press the desired cooking zone se-
lection key (12, or 14, or 18, or 20), the
digital display shows the set power,
press “-” key (15) until the display
shows ”1”, then press “-” (15) again and
thedesiredelementwillshuto.
B. Press the desired cooking zone se-
lection key (12, or 14, or 18, or 20),
press “-” key (15) hold for 3 seconds,
andthehobwillshuto.
C. Press the “ON/OFF” key (6), it will
make a “beep” sound once, and it will
turn o all the active cooking zones.
The hob is now on standby mode.
Thehobfeaturesanautomaticshuto
featurethatturnsotheentirehobif
any cooking zone has been active conti-
nuously for 2 hours.
Power level selection
In order to adjust the heating power,
press the “+” (17) or “-” (15) key. The
power adjusting range is as follows:
In heating state, the induction cooker
has the over-temperature protection
function. When the temperature of the
cooker is close to the set value, there
will be intermittent heating.
Timer function setting
Timer setting range is 1 to 99 minutes.
In cooking state, press the “timing” key
(16), the corresponding burner timing
User ManualEnglish
INDULAP001
