Lascar EL-USB-ACT Bedienungsanleitung
EL-USB-ACT
Quick Start Guide
Thank you for purchasing a Lascar EL-USB-ACT data logger.
This quick start guide provides basic information on the use of your
product. For more detailed instruction consult the user manual on
the mini-CD supplied.
USB port
LCD
Button
Connectors
Battery cover
screw
Getting to know your data logger
Install your battery
Install EasyLog Software and Driver
The EL-USB-ACT is supplied with two AA batteries tted. To begin
use the battery tab must be removed as shown below.
1 Insert the EL-WIN-USB CD into the
CD drive of your computer. If the CD
does not automatically load, navigate
to the CD and double click ‘Setup’.
2 Click ‘Next’.
5 Click ‘Yes’. 6 Click ‘Finish’.
3 Read the ‘IMPORTANT NOTICE’,
select ‘I Agree’ and then ‘Next’.
4 Click ‘Install’.
7 Click ‘Install’. 8 You have successfully installed the
necessary software and driver for your
EL-USB-ACT data logger. An ‘EasyLog
USB’ icon will be placed on your
desktop.
Your Data Logger is now ready for use!
To begin using your data logger, connect the mini-USB cable to
your data logger and an available USB port on your PC.
Setup the data logger by clicking ‘Setup and start the USB
data logger’ and follow the onscreen instructions.
When the setup is complete, the data logger should be
removed from the USB port to begin logging. For advice on how
to best use the data logger for your application, please contact
Lascar’s customer service team.
Module House
Whiteparish, Salisbury
Wiltshire, SP5 2SJ
UNITED KINGDOM
T +44 (0) 1794 884567
E sales@lascar.co.uk
UK 4258 West 12th Street
Erie, PA 16505
UNITED STATES
T +1 (814) 835-0621
USA 8th Floor, China Aerospace
Centre
143 Hoi Bun Road
Kwun Tong, Kowloon
HONG KONG
T +852 2389 6502
E sales@lascar.com.hk
HK
www.lascarelectronics.com
Copyright Lascar Electronics Ltd. 2012 Issue 3 10/12
electronics
Selecting a Current Clamp
The EL-USB-ACT is compatible with most current clamps which
output an AC or DC mV signal proportional to the amount of
current the clamp is detecting. It is advisable to select a current
clamp which features 4mm banana plugs for quick connection to
the EL-USB-ACT; otherwise banana plugs must be manually tted
in order to connect to the data logger.
Please note that the maximum output voltage from the clamp
should not exceed 723V a.c. or 1000mV d.c.; an input to the data
logger above these values may damage the data logger. If you are
unsure of your choice of current clamp, please contact Lascar for
advice.
Ensure connectors are pushed fully home
Inhaltsverzeichnis
Andere Lascar Datenlogger Handbücher
Lascar
Lascar GFX series Bedienungsanleitung
Lascar
Lascar EL-USB-LITE Betriebsanleitung
Lascar
Lascar EasyLog EL-CC-2-001 Bedienungsanleitung
Lascar
Lascar EL-SIE-2+ Bedienungsanleitung
Lascar
Lascar EL-LITE Bedienungsanleitung
Lascar
Lascar EL-SIE-2 Bedienungsanleitung
Lascar
Lascar EL-PDF-1 Series Bedienungsanleitung
