Laser SPK-WCALC-118 Bedienungsanleitung

Clock Radio with Wireless Charging

SPK-WCALC-118

User Manual

WHAT’S IN THE BOX

• Clock radio

• 240V Wall power charger

• USB-A to USB-C charging cable

• 3.5mm to 3.5mm audio cable

• Clamp and screw (to secure the power cable)

• User manual

OVERVIEW

15. On/O switch

16. USB-C port (Power)

17. USB-A port (Media)

18. Micro SD card slot

19. AUX port

20. Wireless charging area

1. Mode

2. Clock

3. Alarm

4. Snooze / Brightness adjustment

5. Vol+ / Previous track

6. Vol- / Next track

7. Play / Pause

8. Bluetooth

9. TF (USB / Micro SD)

10. AUX

11. FM radio

12. Alarm 1

13. Alarm 2

14. Low battery

OPERATIONS

Connecting to power

1. Connect the supplied USB-A to USB-C cable

to the clock’s USB-C port.

2. Connect the other end to the supplied 240V

wall power charger.

3. Connect the charger to power.

Wireless Charging

• Place your phone on the wireless charging area

of the clock.

NOTE: The clock must be powered by the mains

power for wireless charging to work.

Set Time

1. Press the button to switch between 12/24-

hour modes.

2. Hold down the button to start setting the

time; the hour digit will start blinking.

3. Press the button to switch between hour/

minute settings.

OPERATIONS

4. Use and buttons to adjust the values.

5. Press and hold the button to save the time.

Set Alarm

1. Press the button to switch between Alarm 1/

Alarm 2 modes.

2. While alarm icon is ashing on the screen,

press and hold the button to start setting

the alarm.

3. Press the button to switch between hour/

minute/On-O/ringtone/volume/snooze

duration settings.

4. Use and buttons to adjust values.

5. Press and hold the button to save the alarm.

Alarm and snooze functions

• Alarms are active when alarm symbols appear

on the display.

• While the alarm is ringing, press the Snooze

button to activate snooze; press any other

button to turn it o.

continued...

• At other times, go through the alarm setting

process to turn on/o the alarm.

Switch Mode

Press the button repeatedly to switch between

Bluetooth /FM radio/Micro SD/USB/AUX modes.

Adjust the display brightness

Press the Snooze button to adjust the brightness

between O, Low, Medium and High. The default

is High.

Control the volume

• Hold down the button to increase the

volume.

• Hold down the button to decrease the

volume.

Select previous/next song

• Press the button to skip to the previous

song.

OPERATIONS

continued...

• Press the button to skip to the next song.

FM Radio Mode

• Press the button to switch to FM mode.

• Long press the button to automatically scan

and save radio stations.

• Press and buttons to select preset

stations.

USB / Micro SD Mode

Insert a USB ash drive or Micro SD card to

switch to the TF mode, or press the button to

switch.

Aux Mode

1. Connect the supplied 3.5mm audio cable into

the clock’s AUX port and the headphone jack

of the external device.

2. Press the button to switch to AUX mode.

OPERATIONS

continued...

BLUETOOTH

Pairing

1. Press the button to switch to Bluetooth

mode.

2. Enable Bluetooth on your connecting device. It

will search for nearby Bluetooth devices.

3. Select “SPK-WCALC-118”.

NOTE: If “SPK-WCALC-118” does not appear

on your connecting device’s screen, try again

from the beginning of step 1.

4. Conrm Bluetooth pairing request on your

connecting device.

5. Now, audio you play on your connected device

should come through the clock’s speakers.

NOTE: The clock only connects to one device at

a time.

Use your device to control music playback and

volume, or use , and buttons on the

clock.

Answer/Hang up a call

When there is an incoming call. Press the

button to answer the call.

Press again to end the call.

Reject a call

When there is an incoming call, hold down the

button to reject the call.

Disconnecting/Unpairing:

• To disconnect, turn o the connected device’s

Bluetooth.

• To unpair (remove the connection entirely), go

to the connected device’s Bluetooth settings,

nd “SPK-WCALC-118” on the list of paired

devices, and select “Forget” or “Unpair”.

BLUETOOTH

continued...

SECURE THE POWER

CABLE

Use the supplied clamp and screw to secure the

power cable.

1. Run the supplied USB-A to USB-C cable

through the clamp.

2. Plug in the cable to the clock’s USB-C port.

3. Attach the cable to the clock by placing the

screw through the clamp, into a recess, and

tightening it.

Inhaltsverzeichnis

Andere Laser Radiowecker Handbücher

Laser

Laser SPK-QC001 Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Denver

Denver CRQ-105 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

Philips

Philips AJ3180 Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Timex

Timex T300 Bedienungsanleitung