LEDS Mini Sign Instruction Manual
00519-53-000 Page 5 of 15 Issue 6.3 22 January 2021
3 Concept
The Miniature Warning Sign is intended to be
used in an indoor position to indicate messages
to personnel. Typically, the sign is fitted in a
room, adjacent to a door or on a piece of
equipment. The high-quality moulded case is
pleasing to the eye and the gloss finish makes
the unit easy to clean.
The sign offers a red danger and a green safe
indication and is powered by 24VDC or 48VDC.
LEDs are used to give a long service life.
Different red and green messages may be
displayed in the same area of the sign.
Messages may include text and/or symbols.
Standard and custom messages are available.
No message is visible when the sign is switched
off.
When fitted adjacent to a door, the sign is
intended to be located adjacent to the door
handle, approximately in line of sight as a
person reaches for the door handle to open the door.
The sign offers significant safety advantages over traditional warning signs which tend to be erected
over the top of the door, such as:
Safer low voltage operation - no working on live equipment;
Ground level access for installation and maintenance - no working at height;
Fitted beside the door, not over it - no obstruction of the doorway during installation and
maintenance.
The Miniature Warning Sign can be directly operated by Lasermet’s interlock systems. A matching
access keypad is available.
Lasermet provides a full range of laser interlock equipment including control systems, interlock
switches, illuminated warning signs, laser shutters, door locks, external power supplies etc. which
can be connected to provide a complete laser interlock system. Full support, design and installation
is available from Lasermet, please contact us for any queries. Contact details are given at the end of
this manual.
