Lattice Semiconductor Avant-E Bedienungsanleitung

QuickART

Avant-E Evaluation Board

This document provides a brief introduction to the Avant-E Evaluation Board.

Check Kit Contents

The Avant-E Evaluation Board Kit contains the following items:

Avant-E Evaluation Board

12 V AC/DC Adapter and International Plug Adapters

USB Cable for Programming vis PC (USB-A to Mini-B)

Quick Start Guide

Lattice Radiant software download information

Using the Avant-E Evaluation Board

The Avant-E Evaluation Board as shipped supports Master-SPI based conguration.

The external SPI Flash Conguration Memory is pre-loaded with a LED blinking

demonstration program.

Mini USB

FTDI Chip

FMC1

Connector

Avant FPGA

DIP Switch

I/O

Extended

Area

Push Buttons FMC2 Connector

PMOD

Connectors

8-Segment

LEDs

SPI

Flash

12 V DC

Power

Jack

Main Power

Switch

LPDDR4

Memory

Power

LEDs

Avant-E Evaluation Board

Doing More with the Avant-E Evaluation Board

Check the Lattice website at www.latticesemi.com/products/developmentboardsandkits/

avant-e-evaluation-board to download the full User’s Guide, the full source code of the

default demo, and other resources. You can use the Lattice Radiant software to develop

and program your own demos.

Powering the Boards and Observing the Demo Program

Connect the 12 V power supply to J50. Toggle switch SW6 to the ON position. All the

green power LEDs should light up to indicate that the board has proper power. Avant

(U3) will upload the conguration bitstream from the ash memory (U4), ~ 45s. After

conguration, LEDs D6 to D13 and D22 to D29 will blink in a repeating pattern. The three

8-segment LEDs will alternate displaying the number eight and decimal point.

Using the Avant-E Evaluation Board

The Avant-E Evaluation Board is pre-programmed with a basic demonstration.

To develop your own solutions, download and use the Lattice Radiant design software

(version 2022.1 or later) in www.latticesemi.com/software.

If you only need to re-program the board, you can use the Radiant Programmer

Standalone software (version 2022.1 or later).

Additional Terms and Conditions Applicable to Lattice Programming and Development Hardware

Lattice device programmers, programming cables, socket adapters, and other hardware sold for use in conjunction with Lattice

software (“Programming Hardware”) and Lattice evaluation boards and development kits sold for use in conjunction with

evaluating Lattice products (“Development Hardware”) are designed and intended for use solely with semiconductor components

manufactured by Lattice Semiconductor Corporation. Programming and Development Hardware is warranted to meet Lattice

specications only for a period of ninety (90) days; in all other respects the terms and conditions of sale of Programming and

Development Hardware shall be Lattice’s standard terms and conditions set forth in Lattice’s Sales Order Acknowledgment.

Additionally, Lattice specications for Programming and Development Hardware limit their use to low-volume engineering

applications only, and not for volume production use. The warranty for Programming and Development Hardware will not apply to

any Programming or Development Hardware used in production, used with worn or improperly installed hardware, or used with

incompatible systems or components.

Technical Support

www.latticesemi.com/support

(design) are either registered trademarks or trademarks of Lattice Semiconductor Corporation in the United States and/or other

countries. Other product names used in this publication are for identication purposes only and may be trademarks of their

respective companies.

QS069 V1

December 2022

Inhaltsverzeichnis

Andere Lattice Semiconductor Computerhardware Handbücher

Lattice Semiconductor

Lattice Semiconductor CertusPro-NX Stücklistenhandbuch

Lattice Semiconductor

Lattice Semiconductor ECP5 Versa Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor MachXO2 Series Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor MachXO Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor LatticeMico GPIO Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor iCE40 SPRAM Series Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor CrossLink-NX Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor mVision AR0234 Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor LatticeMico32 Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor LatticeMico8 Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor CrossLink-NX ISP Demo Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor CrossLink-NX Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor iCE40 UltraLite Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor sysCLOCK ECP5 Stücklistenhandbuch

Lattice Semiconductor

Lattice Semiconductor CrossLink-NX Bedienungsanleitung

Lattice Semiconductor

Lattice Semiconductor iCE40 UltraLite Stücklistenhandbuch

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung