Laufen SENTEC Konfigurationshandbuch

CLEANING

INSTRUCTIONS

FOR SENTEC

& MARBOND

EVERYDAY

CLEANING

The surface gathers hardly any dirt and is easy to

clean and maintain. It is recommended to clean any

kind of dirt as soon as it appears in order to keep

the product in its best condition.

Avoid using scouring agents with grains or solvents,

which may damage the surface of the product.

Do not use strong acidic cleaning agents or vinegar-

based cleaning agents. Please use agents with

a pH value between 3 and 8 to make sure not to harm

the surface. A light solution can be used

on resistant stains or limescale. Before using new

cleaning agents please try them on small areas

of the product rst.

Most of the stains caused by everyday use can be

removed using products dedicated for Solid Surface

and Acrylic surfaces, applied with a soft damp cloth

(i.e. cotton or microbre) or soft paper-towel.

Rust and limescale can be removed by using

a damp cloth with a cleaning agent dedicated

for this kind of stains.

After applying any cleaning product, rinse all areas

thoroughly with warm water in order to remove the

detergent and dry all wet surfaces with soft cotton

or microbre cloth.

RESISTANT

STAINS

Resistant stains caused by cosmetics, coee,

wine, cigarette ash, detergents, nail polish and

hair dye should be removed immediately with a soft

cloth. Afterwards, clean the stains in the same way as

with daily care. It is recommended to use the cleaning

agent only with soft cotton or microbre cloth. Please

be aware that any scratching materials (e.g. scotch

brite) should not be used on Marbond material.

If your product is made from Sentec you can use

a scotch brite and cleaning cream without grains

to clean stains. This cleaning process should be

performed on the entire surface of the product,

in series of movements: right-left, up-down, diagonal

and circular for nishing. Please remove extremely

persistent stains with the polishing machine.

In this case it is recommended to contact authorized

service technicians.

REMOVAL OF SCRATCHES

PRODUCT REFURBISHMENT

Scratches on Sentec material can be removed

using a scotch brite and plain cleaning cream

or a polishing machine. Follow the same cleaning

process as for stains. When using the polishing

machine, please contact authorized service

technicians.

One of the advantages of Sentec and Marbond

is that the material is renewable. In case of deep

damages, both materials allow the product

to be restored to its original appearance.

This service requires an appropriate repair-kit

(available upon order) and is to be provided by

authorized service technicians.

GENERAL

REMARKS

Any material that is improperly used or poorly

maintained may be damaged. Damage resulting

from inappropriate treatment by the user will not

be covered by our guarantee. The most common

problems resulting in the loss of warranty

services may arise as a result of:

_ Use of aggressive chemicals

(e.g. acetone-based agents, aggressive

solvents, drain cleaners, etc.)

_ Contact of the product with

strong chemicals, boiling liquids

and hot objects

_ Mechanical damage,

in particular impacts or scratches

with a sharp object

Acid Rinse with water Rinse with water

Alkalines Clean with scotch brite Rinse with water

Alcohols Clean with scotch brite Rinse with water

Bleaches Rinse with water Rinse with water

SENTEC: HOW TO CLEAN? MARBOND: HOW TO CLEAN?CHEMICALS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Laufen Badewanne Handbücher

Laufen

Laufen IL BAGNO ALESSI dOt 2.3090.1 Bedienungsanleitung

Laufen

Laufen Sonar Marbond Bedienungsanleitung

Laufen

Laufen IL BAGNO ALESSI 2.4197.0 Bedienungsanleitung

Laufen

Laufen VAL 2.3028.2.000.000.1 Bedienungsanleitung

Laufen

Laufen Pro Marbond 2.3995.2.000.000.1 Bedienungsanleitung

Laufen

Laufen VAL 2.3128.2.000.000.1 Bedienungsanleitung

Laufen

Laufen MEDA 2.2011.2.000.000.1 Bedienungsanleitung

Laufen

Laufen PALOMBA 2.3180.0 Bedienungsanleitung

Laufen

Laufen PALOMBA 2.3180.0 Bedienungsanleitung

Laufen

Laufen SONAR 2.2034.7.000.000.1 Bedienungsanleitung

Laufen

Laufen ALESSI 2.4597.2.000.000.A Bedienungsanleitung

Laufen

Laufen Pro 2.3995.2.000.000.1 Bedienungsanleitung

Laufen

Laufen MEDA 2.2011.7.000.000.1 Bedienungsanleitung

Laufen

Laufen Kartell 2.2233.2 Bedienungsanleitung

Laufen

Laufen LIVING Bedienungsanleitung

Laufen

Laufen MIMO Bedienungsanleitung

Laufen

Laufen MYLIFE 185 Bedienungsanleitung

Laufen

Laufen PRO 2.3295.5.000.615.1 Bedienungsanleitung

Laufen

Laufen Palomba Bedienungsanleitung

Laufen

Laufen IL BAGNO ALESSI ONE 8.1397.1 Bedienungsanleitung

Laufen

Laufen ILBAGNOALESSI ONE 2.4197.0 Handbuch

Laufen

Laufen SOLUTIONS 2.2250.1 Bedienungsanleitung

Laufen

Laufen PALOMBA Bedienungsanleitung

Laufen

Laufen ILBAGNOALESSI H220972 Bedienungsanleitung

Beliebte Badewanne Handbücher anderer Marken

Agua

Agua BARTOLI-66 Bedienungsanleitung

PAA

PAA PRELUDE Bedienungsanleitung

BETTE

BETTE SILHOUETTE Bedienungsanleitung

Kohler

Kohler K-820-GC Kurzanleitung

American Standard

American Standard Whirlpool/Bathing Pool 2748.XXXW Bedienungsanleitung

Oliveri

Oliveri Naples Bedienungsanleitung

Lyons

Lyons Elite ETLxx663219 Series Bedienungsanleitung

Woodbridge

Woodbridge BJ500 Montageanleitung

Whirlpool

Whirlpool Ariel ARL-702 Bedienungsanleitung

TEIKO

TEIKO EXCELLENT DUO Bedienungsanleitung

American Standard

American Standard Colony 5-1/2' x 32" Bedienungsanleitung

American Standard

American Standard 3052OD.X0X Kurzanleitung

Kohler

Kohler K-1111-H2 Kurzanleitung

agape

agape MARSIGLIA AVAS1075 Bedienungsanleitung

Kohler

Kohler K-1151 Montageanleitung

Kohler

Kohler K-1158 Kurzanleitung

Kohler

Kohler K-1244 Montageanleitung

Kallista

Kallista P50045-G5 Montageanleitung