LAUNCH TECH X-431 PAD V Bedienungsanleitung

Version: V1.00.000

Revised date: Feb-27-2018

LAUNCH owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software,

LAUNCH will block the use of this product and reserve the right to pursue their legal liabilities.

LAUNCH X-431 PAD V User's Manual

Read all safety warnings and instructions.

*Note: Failure to follow the warnings and instrucons may result in

electric shock, re and/or serious injury.

1. Always perform automotive testing in a safe environment.

2. Do not connect or disconnect any test equipment while the ignition

is on or the engine is running.

3. DO NOT attempt to operate the tool while driving the vehicle.

Have second personal operate the tool. Any distraction may

cause an accident.

4. Before starting the engine, put the gear lever in the Neutral

position (for manual transmission) or in the Park (for automatic

transmission) position to avoid injury.

5. NEVER smoke or allow a spark or flame in vicinity of battery or

engine. Do not operate the tool in explosive atmospheres, such as

in the presence of ammable liquids, gases, or heavy dust.

6. Keep a fire extinguisher suitable for gasoline/chemical/electrical

res nearby.

7. Wear an ANSI-approved eye shield when testing or repairing

vehicles.

8. Put blocks in front of the drive wheels and never leave the vehicle

unattended while testing.

9. Use extreme caution when working around the ignition coil,

distributor cap, ignition wires and spark plugs. These components

create hazardous voltage when the engine is running.

10. To avoid damaging the tool or generating false data, please make

sure the vehicle battery is fully charged and the connection to the

vehicle DLC (Data Link Connector) is clear and secure.

WARNING SYMBOLS AND DEFINITIONS

This safety alert symbol is used to alert you

to potential injury hazards. Obey all safety

messages that follow this symbol to avoid

possible injury.

Indicates an imminently hazardous situation

which, if not avoided, could result in death or

serious injury to the operator or to bystanders.

Indicates a potentially hazardous situation

which, if not avoided, could result in death or

serious injury to the operator or to bystanders.

Indicates a hazardous situation which, if not

avoided, could result in minor or moderate

injury to the operator or to bystanders.

Addresses practices not related to personal

injury.

IMPORTANT SAFETY INFORMATION

When an engine is operating, keep the service area well-ventilated

or attach a building exhaust removal system to the engine

exhaust system. Engines produce various poisonous compounds

(hydrocarbon, carbon monoxide, nitrogen oxides, etc.) that cause

slower reaction time and result in death or serious personal injury.

LAUNCH X-431 PAD V User's Manual

11. Automotive batteries contain sulfuric acid that is harmful to skin.

In operation, direct contact with the automotive batteries should

be avoided. Keep the ignition sources away from the battery at all

times.

12. Keep the tool dry, clean, free from oil, water or grease. Use a mild

detergent on a clean cloth to clear the outside of the equipment

when necessary.

13. Keep clothing, hair, hands, tools, test equipment, etc. away from

all moving or hot engine parts.

14. Store the tool and accessories in a locked area out of the reach of

children.

15. Do not use the tool while standing in water.

16. Do not expose the tool or power adaptor to rain or wet conditions.

Water entering the tool or power adaptor increases the risk of

electric shock.

Table of Contents

1 Introduction..................................................................................... 1

1.1 Product Prole............................................................................... 1

1.2 Features ........................................................................................ 1

1.3 Technical Specications ................................................................ 2

2 Knowledge of X-431 PAD V............................................................ 3

2.1 X-431 PAD V Tablet....................................................................... 4

2.2 Docking Station (Optional)............................................................. 5

2.3 VCI Device..................................................................................... 6

2.4 Accessory Checklist....................................................................... 7

3 Preparations.................................................................................... 9

3.1 Charging X-431 PAD V.................................................................. 9

3.2 Power ON/OFF.............................................................................. 9

3.3 Locator & Navigation Buttons...................................................... 10

3.4 Wi-Fi Setup.................................................................................. 10

4 Initial Use........................................................................................11

4.1 Getting Started .............................................................................11

4.2 Register & Download Diagnostic Software...................................11

4.3 Function Modules ........................................................................ 13

4.4 Vehicle Menu Layout ................................................................... 14

4.5 Diagnostics toolbar...................................................................... 15

5 Start Diagnostics.......................................................................... 16

5.1 Connections................................................................................. 16

LAUNCH X-431 PAD V User's Manual

III

5.1.1 Preparation .......................................................................... 16

5.1.2 DLC Location....................................................................... 16

5.1.3 Vehicle Connection (For Passenger Vehicle Version) ......... 16

5.1.3 Vehicle Connection (For Commercial Vehicle Version/Diesel

& Gasoline Version)...................................................................... 17

5.2 Communication Setting ............................................................... 18

5.3 Start Diagnostics ......................................................................... 18

5.3.1 AutoDetect (VIN SCAN)....................................................... 18

5.3.2 Manual Diagnosis ................................................................ 21

5.4 Maintenance Reset...................................................................... 30

5.4.1 Oil Reset Service................................................................. 30

5.4.2 Electronic Parking Brake Reset........................................... 31

5.4.3 Steering Angle Calibration ................................................... 31

5.4.4 ABS Bleeding....................................................................... 31

5.4.5 Tire Pressure Monitor System Reset................................... 31

5.4.6 Gear Learning...................................................................... 31

5.4.7 IMMO Service...................................................................... 32

5.4.8 Injector Coding..................................................................... 32

5.4.9 Battery Maintenance System Reset .................................... 32

5.4.10 Diesel Particulate Filter (DPF) Regeneration..................... 32

5.4.11 Electronic Throttle Position Reset ..................................... 33

5.4.12 Gearbox Matching ............................................................. 33

5.4.13 AFS (Adaptive Front-lighting System) Reset .................... 33

5.4.14 Sunroof Initialization .......................................................... 33

5.4.15 Suspension Calibration ..................................................... 33

5.5 Remote Diagnosis ....................................................................... 34

5.5.1 Interface Layout................................................................... 34

5.5.2 Add Friends.......................................................................... 34

5.5.3 Start Instant Messaging....................................................... 35

5.5.4 Launch Remote Diagnosis (Device-To-Device)................... 36

5.5.5 Launch Remote Diagnosis (Device-To-PC)......................... 37

5.6 Diagnostic History........................................................................ 39

5.7 Software Update.......................................................................... 39

5.7.1 Update Diagnostic Software & APP..................................... 39

5.7.2 Set Frequently Used software ............................................. 40

5.7.3 Renew Subscription............................................................. 40

5.8 Feedback..................................................................................... 40

6 User Info........................................................................................ 42

6.1 My Report.................................................................................... 42

6.2 VCI............................................................................................... 43

6.3 Activate VCI................................................................................. 43

6.4 Firmware Fix................................................................................ 44

6.5 My News...................................................................................... 44

6.6 CDB Token .................................................................................. 44

6.7 Reward for optimized report ........................................................ 44

6.8 Data Stream Sample ................................................................... 44

6.9 Vehicle Voltage............................................................................ 44

6.10 Prole ........................................................................................ 44

6.11 Change Password ..................................................................... 44

6.12 Settings...................................................................................... 44

6.12.1 Units................................................................................... 44

LAUNCH X-431 PAD V User's Manual

6.12.2 Shop Information ............................................................... 44

6.12.3 Printer Set.......................................................................... 45

6.12.4 Clear Cache....................................................................... 46

6.12.5 About.................................................................................. 46

6.12.6 Auto Update....................................................................... 46

6.12.7 Login/Exit from current account......................................... 46

7 ToolBox ......................................................................................... 47

7.1 Sensorbox & Multimeter (Optional) ............................................. 47

7.1.1 Product summary................................................................. 47

7.1.2 Structure and Accessories ................................................... 48

7.1.3 Sensor Simulation................................................................ 49

7.1.4 Multimeter................................................................................. 53

7.2 Batterybox (Optional)................................................................... 55

7.2.1 Product Summary................................................................ 55

7.2.2 Test Environment ................................................................. 55

7.2.3 Batterybox Structure and Test Accessories ......................... 56

7.2.4 Connections & Operations................................................... 56

7.2.5 Precautions on battery test ................................................. 59

7.3 Oscilloscope (Optional) ............................................................... 60

7.3.1 Introduction.......................................................................... 60

7.3.2 Structure & Accessories....................................................... 61

7.3.3 Connection & Initial Use ...................................................... 64

7.3.4 Operations ........................................................................... 67

7.4 Ignition (Optional) ........................................................................ 74

7.4.1 Secondary-distributor ignition analysis ................................ 74

7.4.2 Secondary-simultaneous ignition analysis........................... 76

7.4.3 Secondary-direct ignition analysis ....................................... 77

7.4.4 Waveform analysis mode .................................................... 78

7.5 Videoscope (Optional)................................................................. 81

7.5.1 Introduction.......................................................................... 81

7.5.2 About Videoscope................................................................ 82

7.5.3 Technical Parameters .......................................................... 82

7.5.4 Connections & Operations................................................... 83

8 Other Modules .............................................................................. 84

8.1 Email............................................................................................ 84

8.2 Browser ....................................................................................... 84

8.2.1 Open browser ...................................................................... 84

8.2.2 Download les ..................................................................... 84

8.3 TeamViewer................................................................................. 84

8.4 System OTA Upgrade.................................................................. 85

8.5 Facebook..................................................................................... 85

8.6 Wallet........................................................................................... 86

8.6.1 Registering Wallet................................................................ 86

8.6.2 How to Obtain Wallet Tokens............................................... 86

8.6.3 Checking Wallet Tokens....................................................... 87

8.6.4 How to Backup Wallet Tokens ............................................. 87

8.7 ES File Explorer........................................................................... 88

8.8 Album........................................................................................... 88

8.9 Synchronization........................................................................... 88

Appendix - FAQ................................................................................ 89

LAUNCH X-431 PAD V User's Manual

• Remote Diagnosis: This option aims to help repair shops or

technicians launch instant messaging and remote diagnosis,

making the repair job getting xed faster.

• Maintenance & Reset: All kinds of common maintenance and

reset items including Oil lamp reset, DPF regeneration, ABS

bleeding can be done.

• One-click Update: Lets you update your diagnostic software

online.

• Diagnostic History: Provides a quick access to the tested vehicles

and users can choose to view the test report or resume from

previous diagnostic session, without the necessity of starting

from scratch.

• Pre- and Post- Repair Result Comparison: By comparing the pre-

repair and post-repair report, you can clearly determine which

vehicle issues have been xed and which remained unsolved.

• Diagnostic Feedback: Enables you to submit the vehicle issue to

us for analysis and troubleshooting.

• Add-on Modules: Scopebox, Sensorbox, Batterybox and

Videoscope (sold separately) are available for extending the

functions of X-431 PAD V.

• Vehicle Coverage: Quick dial to view the vehicle models that

X-431 PAD V covers.

2. WLAN connection is supported.

3. ADAS calibration: Optional. This function needs to be activated

before normal use and only works with the LAUNCH-specic ADAS

calibration tool.

4. Web browser: Users can make online search and visit any website.

5. File Manager: Lets you manage les or downloaded les stored in

memory card efciently.

6. Settings: To congure your personalized X-431 PAD V.

1 Introduction

1.1 Product Prole

X-431 PAD V is an evolutionary smart solution for specialized

automotive diagnosis and maintenance. It inherits from LAUNCH’s

advanced diagnosing technology and is characterized by covering a

wide range of vehicles, featuring powerful functions, and providing

precise test result.

Through the wireless communication between VCI device and X-431

PAD V handset, it achieves full car model and full system vehicle

trouble diagnosis, which include Reading DTCs, Clearing DTCs,

Reading Data Stream, Actuation Test and Special Functions.

Moreover, taking advantage of the mobile Internet, it also integrates

One-click Update, Remote Diagnosis which helps to diagnose vehicle

issues more efciently, and greatly increase customer’s retention and

boost shop revenue.

X-431 PAD V adopts a higher performance-price ratio display tablet,

which comes loaded with two Wi-Fi modules, powerful 8-core 2GHz

processor, 4G RAM, and a 10.1” sunlight readable capacitive touch

screen with a resolution of 1920 x 1200 pixels.

1.2 Features

1. Diagnose:

• Smart Diagnosis: This module allows you to use the VIN

information of the currently identied vehicle to access its data

(including vehicle information, historical diagnostic records) from

the cloud server to perform quick test.

• Local Diagnosis: To perform diagnosis by executing on-screen

commands step by step. Diagnosis functions include: Read

DTCs, Clear DTCs, Read Data Stream, Special Functions etc.

LAUNCH X-431 PAD V User's Manual

B. VCI Device

Item Description

Working voltage DC 9V ~ 36V

Battery 500mAh

Memory 256MB

ROM 8GB

USB Type B x 1

Bluetooth BLE 4.0 + EDR

WiFi 2.4G/5GHz dual frequency

1.3 Technical Specications

A. X-431 PAD V Tablet

Item Description

Operating system Android 7.1

CPU 8-core processor, 2GHz

Display 10.1 inch capacitive touch screen with

1920 x 1200 resolution

Memory 4GB

Hard disk 64GB

Connectivity • Wi-Fi: 2.4G/5GHz dual frequency

• Universal serial BUS Ports (1 x

Type-C + 1 x Type-A)

• BT 2.1 + EDR & 4.0 BLE

Cameras 8MP front-facing camera + 13MP rear-

facing camera

Size 320mm x 211mm x 46mm

Operating

Temperature -10℃~ 50℃(14 ~122℉)

Storage Temperature -20℃~ 70℃(-4 ~158℉)

LAUNCH X-431 PAD V User's Manual

2 Knowledge of X-431 PAD V

There are three main components to the X-431 PAD V system:

• X-431 PAD V Tablet -- the central processor and monitor for the

system (For details, please refer to Chapter 2.1.)

Fig. 2-1

• Docking Station -- the platform for charging the tablet and extending

functions (For details, please refer to Chapter 2.2.)

Fig. 2-2

• VCI Device -- the device for accessing vehicle data (For details,

please refer to Chapter 2.3.)

Fig. 2-3

LAUNCH X-431 PAD V User's Manual

2.1 X-431 PAD V Tablet

Fig. 2-4 Top & front views

Table 2-1 formulates ports and indicators of X-431 PAD V tablet:

No. Name & Descriptions

1Memory Card Slot -- To store the memory card for storage

expansion.

2Type C Charging Port -- Reserved for charging the X-431

PAD V tablet.

3Power/Screen Lock Button -- To turn the tablet on/off with

long press, or lock the screen with short press.

Volume Buttons -- To adjust the volume.

*Note: Press and hold [POWER] and [VOL -] key to capture the

current screenshot.

Data I/O Port -- Reserved for add-on modules (such as

Batterybox, Scopebox and Sensorbox), and other devices

with similar port.

6Microphone

Charging indicator -- It illuminates red while X-431 PAD V

tablet is charging. Once charging is nished, it will illuminate

solid green.

810.1" Capacitive Touch Screen

9Ambient Light Sensor

10 Front Camera

LAUNCH X-431 PAD V User's Manual

2.2 Docking Station (Optional)

Fig. 2-6 Docking Station

Table 2-3 formulates ports of X-431 PAD V docking station

No. Name & Descriptions

1Charging Slot -- To charge the tablet.

2OBD16 Socket -- To store the VCI device to avoid loss.

3DC 5V OUT Port -- (Reserved for charging other USB

devices only.)

Type C Charging Port -- Use the power adaptor to supply

power to the docking station through connection to AC

outlet.

5Power LED -- Illuminates solid green when it is powered

up.

Fig. 2-5 Rear view

Table 2-2 formulates parts of X-431 PAD V tablet (rear):

No. Name & Descriptions

11 Rear Camera

12 Camera Flash

13 Audio Speaker

14 Charging Slot

15 Adjustable Kickstand - Flip out it to any angle and work

comfortable at your desk, or hang it on automotive part.

Andere Handbücher für X-431 PAD V

Inhaltsverzeichnis

Andere LAUNCH TECH Tablette Handbücher

LAUNCH TECH

LAUNCH TECH X-431 EURO TAB Bedienungsanleitung

Beliebte Tablette Handbücher anderer Marken

Laser

Laser MID-1060 Benutzerhandbuch

MUNBYN

MUNBYN IRT09J Kurzanleitung

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Bedienungsanleitung

Dell

Dell Latitude ST Betriebsanleitung

Venturer

Venturer WT9L11 Bedienungsanleitung

EDUGEAR

EDUGEAR UnoBook Bedienungsanleitung

Philips

Philips PI3210G/58 Bedienungsanleitung

TwinMOS

TwinMOS TwinTAB-T102D1 Bedienungsanleitung

Archos

Archos 9.7 xenon Bedienungsanleitung

HANNspree

HANNspree HANNspad SN70T3 Bedienungsanleitung

Philips

Philips PI3105W2/55 Bedienungsanleitung

Zeki

Zeki TBDB763B Bedienungsanleitung

Ricoh

Ricoh eQuill Bedienungsanleitung

DT Research

DT Research DT365CT Montageanleitung

MaxWest

MaxWest Nitro Phablet 9 Bedienungsanleitung

LG LG-V935 Bedienungsanleitung

Aaeon

Aaeon RTC-1000A1 Bedienungsanleitung

Trevi

Trevi TAB 9 C8 Bedienungsanleitung