Launch BST-860 Bedienungsanleitung

LAUNCH BST-860 Battery Tester User Manual

NOTE:

⚫Carefully read the user manual before using, and keep it well for future reference.

⚫Carefully check the device parts list before using.For any doubt, contact Launch

distributor immediately.

⚫Due to the product upgrade, tiny difference between the user manual and the

device will not be further noticed. Take the device as standard.

LAUNCH BST-860 Battery Tester User Manual

refer to "Launch"), any company or person is not allowed to copy and duplicate this user

manual in any format (electronic, mechanical, video, record or other formats).The user

manual is designed only for Launch products. Any consequence caused by using the user

manual to guide other device operation is not under the responsibility of Launch.

Launch and its branches are not responsible for the fees and expense of the device

damage and loss due to private accident or from third party, misuse and abuse of the

device, unauthorized change and repair, or any operation and maintenance not following

Launch standard.

Launch is not responsible for device damage or problem due to the usage of any optional

parts or consumables instead of Launch original products or Launch recognized products.

Declaration: Other product names mentioned in the user manual are aimed to describe the

device usage. The registered trademarks still belong to the original company.

The device is for professional technicians or maintenance and repair personnel.

Registered Trademark

Launch has registered its trademark in China and several other countries, logo is

.Other Launch trademarks, service marks, dot names, Icons, company names

mentioned in the user manual all belong to Launch and its subsidiaries.In those countries

where Launch trademark, service mark, dot name, icon, company name not registered yet,

Launch declaim the right for its unregistered trademark, service mark, dot name, icon, and

company name.Trademarks of the other products and company names mentioned in the

user manual still belong to original registered company.Without written agreement from the

owner, no person is allowed to use the trademark, service mark, dot name, icon and

company name of Launch or of other mentioned companies.You can visit

http://www.cnlaunch.com or write to Customer Service Center of LAUNCH TECH CO., LTD

at Launch Industrial Park, North of Wuhe Avenue, Banxuegang, Longgang District,

Shenzhen, P.R.China, to get contact with Launch for the written agreement on the usage of

the User Manual.

LAUNCH BST-860 Battery Tester User Manual 
 
Content 
Chapter 1 Product Summary ...................................................................... 1
1.1 Product Profile............................................................................................................1 
1.2 Product Function.........................................................................................................1 
1.3 Technical Parameter:..................................................................................................2 
1.4 Working Enviornment Requirement.............................................................................. 
Chapter 2 Tester Structure.......................................4
Chapter 3 Operation ............................................6
3.1 Battery Test.................................................................................................................6 
3.2 CrankingTest............................. .................................................................................................7
3.3 Charging Test.......................................................................................................... ...8 
3.3.1 Charging Test Result.........................................................................................9 
3.4 Review Data..............................................................................................................10 
3.5 Print Data...................................................................................................................10 
3.6 Export Data......................................................................................................... .........................10 
 
Chapter 4 Additional Function....................................................................11 
 4.1 Set Language............................................................................................................11 
4.2 Time adjustment........................................................................................................11 
Chapter 5 Warranty Clause .....................................12 
 
 
 
 
 
 
 
 
 
 
 

LAUNCH BST-860 Battery Tester User Manual

Chapter 1 Product Summary

1.1 Product Profile

BST-860 Battery Tester adopts currently the world's most advanced conductance

testing technology to easily, quickly and accurately measure the actual cold cranking amps

capability of the vehicle starting battery, healthy state of the battery itself, and common fault

of the vehicle starting system and charging system, which can help maintenance personnel

to find the problem quickly and accurately, thus to achieve quick vehicle repair.

1. Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM

flat plate battery, AGM spiral battery, and Gel battery, etc.

2. Directly detect bad cell battery.

3. Polarity reverse connection protection, reverse connection will not damage the tester or

affect the vehicle and battery.

4. Directly test the battery with loss of electricity, no need to full charge before testing.

5. Testing standards include currently the world's majority of battery standards, CCA, BCI,

CA, MCA, JIS, DIN, IEC, EN, SAE, GB.

6. Support multi-languages, customer can select different language package, which

includes:

European version A: English, Russian, French, Italian, German,Polish

European Version B: Dutch, Sweden, Finnish, Turkish, Danish,Norwegian

American version :English, Spanish, Portuguese, French

Asian version A: English, Chinese Simple, Chinese Traditional

Asian version B: English, Japanese, Korean

Other languages can also be customized according to user's need.

1.2 Product Function

Main functions of BST-860 battery tester include: battery test, cranking test, charging

test and other additional functions.

LAUNCH BST-860 Battery Tester User Manual

Battery test is mainly targeted to analyze the battery healthy status to calculate the

actual cold cranking capability of the battery and the aging extent, which provide reliable

analysis evidence for the test and maintenance of the battery.It notifies the user to replace

battery in advance when the battery getting aged.

Cranking test is mainly to test and analyze the starting motor. Through testing the

actual required cranking current and cranking voltage of the starting motor, it can find out

whether the starting motor works fine.There are several reasons why the starting motor is

abnormal: lubricating system fault causing the starting loaded torque increasing or rotor

friction of the starting motor causing the increasing friction of the starting motor itself.

Charging test is to check and analyze the charging system, including generator,

rectifier, rectifier diode, etc., thus to find out whether the output voltage of the generator is

normal, the rectifier diode works fine and the charging current is normal.Suppose one of the

above mentioned parts is not in normal situation, it will lead to over charge or incomplete

charge of the battery, thus the battery will be quickly damaged and also greatly shorten the

using life of other loaded electrical appliance.

Additional functions include:

Review Data,Print Data, Export Data.

1.3 Technical Parameter:

1) Cold Cranking Amps Measure Range:

Measure Standard

Measure Range

CCA

100-2000

BCI

100-2000

MCA

100-2000

JIS

26A17--245H52

DIN

100-1400

IEC

100-1400

100-2000

SAE

100-2000

30-220Ah

LAUNCH BST-860 Battery Tester User Manual

2) Voltage Measure Range：7-16VDC.

1.4 Working Environment Requirement

Working Environment Temp.: -20°C-60°C

It is applicable for automotive manufacturers, automotive maintenance and repair

workshops, automotive battery factories, automotive battery distributors, and educational

organizations, etc.

LAUNCH BST-860 Battery Tester User Manual

Chapter 2 Tester Structure

BST-860 mainly consists of battery tester main unit, testing cables.

BST-860 Battery Tester main unit cover is made of ABS acid-resistant plastic.

USB Cable (With attached picture)

Key Description

● Up and Down keys

Select upwards or downwards via white UP and DOWN keys.

●Return key

Return to previous menu via blue RETURN key.

● OK key

Confirm the selection via green OK key

LAUNCH BST-860 Battery Tester User Manual

● MENU key

Enter additional function program via MENU key.

LAUNCH BST-860 Battery Tester User Manual

Chapter 3 Operation

Connect the red test clamp with battery anode and the black one with cathode, the tester

will power on automatically. Voltage battery below 7.0VDC can’t be tested properly, then

press OK key to continue.

According to the tester, you can press UP/DOWN key to choose:

①Battery Test

②Cranking Test

③Charging Test

④Review Data

⑤Print Data

⑥Export Data

3.1 Battery Test

After entering battery test program, tester displays the tester model and time .

Select the battery test and press OK key to continue:

Battery Type: select your battery type, usually is “Regular Flooded”

Input testing standard: the standard which you can see the front of the

battery ,such as CCA、BCI、DIN. If you can’t find any info about the standard, you can

choose GB (Chinese standard). Choose GB standards would lead little tolerance.

Input rated capacity: you can see the starting current standards in front of the battery .Such

as CCA/500A.

Then press OK key to start testing. You may get the testing result as following:

LAUNCH BST-860 Battery Tester User Manual

Continue to press OK key, you can print the testing result directly.

Note：

For power loss battery (such as a vehicle for a long time on hold, the battery is not charged

in time; forget to close the lights, the doors resulting in serious loss of battery electric

vehicle and can not be started, etc.), in the actual testing process may also be prompted to

"Please replace the battery," for such batteries, please consult the battery manufacturers,

and then tested.

3.2 Cranking Test

After entering the second start system test function ,the press OK key as following:Starting

the engine as prompted, tester will automatically complete the cranking test and display the

result.

Normally, cranking voltage value lower than 9.6V is regarded as abnormal and it is OK if it

is higher than 9.6V.Test result of the tester includes actual cranking voltage and actual

cranking time.

When cranking test is abnormal, battery test result will also be displayed at the same time.

Inhaltsverzeichnis

Andere Launch Prüfgeräte Handbücher

Launch

Launch X-431 PAD III Bedienungsanleitung

Launch

Launch X-431 PROS Bedienungsanleitung

Launch

Launch BST-560 Bedienungsanleitung

Launch

Launch X-431 ADAS PRO Bedienungsanleitung

Launch

Launch KES-200 Bedienungsanleitung

Launch

Launch BST-460 Bedienungsanleitung

Launch

Launch Creader 5001 Bedienungsanleitung

Launch

Launch X-431 Throttle III Bedienungsanleitung

Launch

Launch Creader 5001 Bedienungsanleitung

Launch

Launch EasyDiag Bedienungsanleitung

Launch

Launch X-431TOP Bedienungsanleitung

Launch

Launch STS600 Bedienungsanleitung

Launch

Launch X431 Scopebox Bedienungsanleitung

Launch

Launch X-431 EURO TAB II Bedienungsanleitung

Launch

Launch Creader CR3001 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung