Lavex 687FM1506SS Bedienungsanleitung

INSTRUCTIONS

MANUAL

AIR CURTAINS

MODELS: #687FM1506SS, #687FM1509PC, #687FM1509SS,

#687FM1510PC, #687FM1510SS, 687FM1518SS

READ ENTIRE MANUAL BEFORE USE

Lavex Industrial • 2205 Old Philadelphia Pike • Lancaster, PA 17602

08/2022

INSTRUCTION MANUAL • 2

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE

THE FOLLOWING:

A. Always disconnect, lock, and tag power source before installing or servicing. Failure to

disconnect power source can result in ﬁre, shock, or serious injury.

B. Installation work and electrical wiring must be done by qualiﬁed person(s) in accor-

dance with all applicable codes and standards, including ﬁre-rated construction.

C. When cutting or drilling into walls or ceilings, do not damage electrical wiring and

other hidden utilities.

D. To reduce the risk of ﬁre or electric shock, do not use this fan with any solid-state

speed control device.

E. Repair and maintenance operations can only be performed by qualiﬁed personnel.

F. Verify and ensure the rated voltage and frequency (please refer to the rating label) of

the air curtain is in compliance with the main supply.

TABLE OF CONTENTS

PRODUCT INTRODUCTION ................................................................................... Page 3

INSTALLATION DIMENSIONS ................................................................................. Page 3

INSTALLATION CAUTIONS .................................................................................... Page 4

INSTALLATION INSTRUCTIONS ......................................................................... Page 5–6

TECHNICAL PARAMETERS ................................................................................... Page 6

WIRING DIAGRAM ................................................................................................ Page 7

OPERATING INSTRUCTIONS ................................................................................. Page 7

MAINTENANCE AND CLEANING ........................................................................... Page 8

INSTRUCTION MANUAL • 3

PRODUCT INTRODUCTION

Air curtains are widely installed at the entrances of supermarkets, theaters, meeting

rooms, hotels, oces, storerooms, etc. They can reduce penetration of insects, dust,

and unconditioned air into a conditioned space by forcing an air stream over the

entire entrance to create a comfortable environment.

INSTALLATION DIMENSIONS

MODEL A B C D E F G H I J

687FM1506SS 23.62 0.98 21.65 --- ---

2.05 5.71 10.24 8.58 5.04

687FM1509PC/SS 35.43

1.18

11.42 22.05 ---

687FM1510PC/SS 39.37 11.42 22.05 ---

687FM1518SS 70.87 11.42 46.30 11.42

NOTE: Measurements are subject to change without notice due to product development.

UNIT MEASUREMENTS (INCHES):

INSTRUCTION MANUAL • 4

INSTALLATION CAUTIONS

Observe the following when installing air curtains:

1. Please install the unit on a ﬁrm support-

ing structure. The mounting plate should be

mounted to at least one wall stud to avoid

shaking and to ensure its security as the unit

running may cause it to become loose or

shake and make noise.

4. When then entrance is wider than the

unit, it is recommended to install two or

more units. In this case, provide 1" to 1½"

gaps between the units.

6. Don’t install the unit at a place where it

is splashed by water, exposed to excessive

steam, explosive gas, or corrosive gas.

2. Please install the unit inside the room.

3. Install the unit no more than 108" from

the ground.

5. Don’t allow gaps between the unit and

the wall.

INSTRUCTION MANUAL • 5

INSTALLATION INSTRUCTIONS

A. Installing on a concrete wall:

B. Installing on a wooden wall:

1. Unscrew the mounting plate and remove

it from the back of the main body.

3. Fix the mounting plate to the wall after

the cement sets (use the washers and nuts

as shown below).

1. Remove the mounting plate from the

back of the main body. Determine the

mounting location and ﬁx the mounting plate

to the wooden wall with tapping screws.

2. Determine the mounting location with

the mounting plate. Fix the bolts in place and

pour cement into the bolt holes.

4. Mount the main body onto the mounting

plate as shown below and screw it back to

the mounting plate.

2. Mount the main body onto the mounting

plate as shown below and screw it back to

the mounting plate.

INSTRUCTION MANUAL • 6

TECHNICAL PARAMETERS

NOTE: Technical parameters are subject to change without notice due to product

development.

C. Installing on a ceiling:

MODEL VOLTAGE

(V~Hz) POWER (W)

MAX AIR VE-

LOCITY (FPM)

AIR VOLUME

(CFM)

NOISE LEVEL

(dB) NET WEIGHT

(LB)

H L H L H L

687FM1506SS

120~60

260

3150 2559

1177 883 67 65 26.5

687FM1509PC/SS 380 1471 1177 69 67 33.1

400

687FM1510PC/SS 1648 1354 71 69 37.5

760

687FM1518SS 2943 2354 76 74 71.7

1. Remove the mounting plate from the

back of the main body.

3. Fix the mounting plate to the ceiling

brackets and tighten it securely as shown

below. The position of the mounting plate

can be adjusted in vertical direction accord-

ing to need, but the max distance is 100mm.

2. Fix the ceiling brackets as shown below.

4. Mount the main body onto the mounting

plate as shown below and screw it back to

the mounting plate.

INSTRUCTION MANUAL • 7

WIRING DIAGRAM

The wires marked “SW” in the wiring diagram are used for the connection of an optional

door limit switch. A 2-wire extension cable (not included) is needed. Please use a cable

gland and a knockout on one side of the air curtain to ﬁx the 2-wire

extension cable.

OPERATING INSTRUCTIONS

1. Connect power to the unit.

2. Push the power switch to the left/right to power on the unit. [L] - Low speed

[H] - High speed.

3. Adjust the air deﬂector to obtain optimum eect.

INSTRUCTION MANUAL • 8

MAINTENANCE AND CLEANING

WARNING

A. Any service is to be performed only by qualiﬁed personnel who are

familiar with local codes and regulations and are experienced with this type

of product.

B. Always unplug or disconnect the appliance from the power supply before

servicing or cleaning the unit.

C. Never use petrol, benzene, thinners, or any other such chemicals to clean

the unit.

D. Don’t allow water or any liquid to enter the motor.

1. Routine maintenance must be done every year.

2. Plastic parts should be cleaned with mild soap and water, thoroughly remove

soap with a clean, damp cloth.

3. Wipe the exterior surfaces of the fan with a moistened cloth with a solution of

mild detergent and water.

4. Dry the case with a soft, dry cloth before operating the unit.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lavex Heizung Handbücher

Lavex

Lavex 687FM3509LY Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung