LAZER BULLET 2.0 Bedienungsanleitung

Lazer Bullet 2.0

USER MANUAL

For a video guide to help with the following steps please

go to the following URL and click on how to videos:

www.youtube.com/user/LazerSport

The Lazer Bullet 2.0 helmet has a

ventilation on demand feature called

Airslide. This system allows the

user to control the amount of airow

through the helmet. With the system

closed, the helmet allows little airow

and has optimized aerodynamic

performance. With the Airslide

opened the helmet allows a lot of

airow and optimized ventilation.

A) To open the Airslide system,

place your hand on the honeycomb

structure, gently press down and slide

the system upwards until it can go no

further.

The entire honeycomb structure

should slide up (diagram 1A), opening

ventilation holes inside the helmet.

B) To close the Airslide stystem,

place your hand on the honeycomb

structure, gently press down and slide

the system downwards until it can go

no further ((diagram 1B).

The entire honeycomb structure

should slide down, closing all

ventilation holes inside the helmet.

1. How to use the Airslide?

LAZER BULLET 2.0

1A)

1B)

2. How to customize your Bullet 2.0?

The Lazer Bullet 2.0 helmet has the

option of being customized with

another decorative cap on top of the

helmet (2B).

A) To change this cap, close the

Airslide system as shown in 1B.

Then reach inside the helmet and

push with your ngers on the Airslide

cap through the front ventilation hole

on the helmet, this should release the

Airslide cap from the helmet.

B) Now grab the cap covering the

back of the helmet with two ngers on

the part that says LAZER and gently

pull it away from the helmet towards

the rear.

C) To install a new cap, place the new

cap aligned with the free space on

top of the helmet and gently press

downward until you hear a popping

sound.

Then align the Airslide cap with the

opening in the helmet and gently

apply pressure until you hear a

popping sound.

Make sure that both caps are installed

correctly and that the caps align

perfectly with the helmet, apply more

gentle pressure if needed.

Attention: Always install both

caps on the Bullet 2.0 before use.

Lazer does not recommend using

the helmet without these caps

installed.

LAZER BULLET 2.0

2A)

2C)

2B)

LAZER BULLET 2.0

The Lazer Bullet 2.0 helmet can

accept the Inclination Sensor

system to help you nd your perfect

aerodynamic position. This body

posture meter can help track your

current head position and via sound

and/or vibration guide you to your

perfect position.

A) To install the Inclination sensor,

rst mount the sensor to it’s

baseplate.

Then mount the baseplate to the back

of the helmet using the mushroom

install mounts on the baseplate, and

push these into the snap baskets that

are located at the rear of the helmet.

B) To remove the Inclination Sensor,

grab the sensor and baseplate and

gently pull it away from the helmet.

Once the mushroom install mount

release from the snap baskets, the

Sensor unit is free to move.

C) Switch the inclination sensor on by

pressing on the ON button.

To set your inclination sensor up,

connect it to the computer and use

the provided software.

Please read the Inclination Sensor

manual for more detailed instructions.

3. How to install the Inclination Sensor?

3B)

3C)

3A)

LAZER BULLET 2.0

The Lazer Bullet 2.0 helmet can

accept the LifeBEAM sensor to

measure your pulse rate when riding.

This system can connect via Ant+ or

Bluetooth to any device you want to

use during riding, so you can always

monitor your pulse rate throughout

the ride.

A) To install the LifeBEAM sensor

rst snap the LifeBEAM accessory

mount (4A) into the helmet, by

pushing the mushroom install mounts

into the snap baskets located at the

rear of the helmet.

B) Once this accessory mount is

installed, attached the LifeBEAM

sensor box to this accessory by

looping the rubber sensor housing to

the accessory mount attached to the

helmet.

C) Then install the sensor in the

front of the helmet, where it can

make contact with the skin on your

forehead. When this is done, run the

cable through the helmet towards

the back, and attached the cable

to the sensor box using the the jack

attached to the cable and the socket

foreseen in the sensor box.

Switch on the Sensor box, connect a

device to the sensor box via Ant+ or

Bluetooth signal, and put the helmet

on your head. After 10 seconds you

should start seeing your pulse rate on

your device and you are ready to go.

Please read the LifeBEAM manual

for more detailed instructions.

4. How to install the LifeBEAM Sensor?

4B)4A)

4C)

LAZER BULLET 2.0

The Lazer Bullet 2.0 helmet

comes included with a magnetic

panoramic lens which can be used

to protect you from the elements and

increase aerodynamic performance.

A) To install the magnetic

panoramic lens simply snap the lens

onto the front of the helmet as shown

in diagram A.

B) The lens can also be magnetically

docked on the back of the helmet

either while riding or while o the bike.

To dock the lens simply align the lens

with the helmet as shown in diagram

Band snap the central magnet of the

lens onto the central magnet of the

helmet.

5. How to use the magnetic panoramic lens?

5A)

LAZER BULLET 2.0 5. How to use the magnetic panoramic lens?

5B)

Lamorinièrestraat 33-37

2018 Antwerp - Belgium

www.lazersport.com

For other and more helmet

instructions, please refer to

the owner manual included

with the helmet.

Thank you for choosing the Lazer helmet.

You have made an excellent choice that

will help to reinforce your safety while

cycling: the sport for which this helmet

has been designed. Lazer helmets

conform to the strict criteria

of international standards.

Wearing a helmet may reduce the

seriousness of injuries to the head that

may occur during a sports accident.

For this reason, it is important to

use this protective gear properly.

Instructions for use and care

1) No helmet can protect the wearer

against all possible impacts.

2) The helmet is designed to be retained

by a strap under the lower jaw.

3) To be eective, a helmet must t and be

worn correctly. To check for correct

t, place helmet on head and make any

adjustments indicated. Securely fasten

retention system. Grasp the helmet and

try to rotate it to the front and rear.

A correctly tted helmet should be

comfortable and should not move forward

to obscure vision or rearward to expose

the forehead.

4) No attachments should be made to the

helmet except those recommended by

the helmet manufacturer.

5) The helmet is designed to absorb shock

by partial destruction of the shell and liner.

This damage may not be visible. Therefore,

if subjected to a severe blow, the helmet

should be destroyed and replaced even

if it appears undamaged.

6) The helmet may be damaged and

rendered ineective by petroleum and

petroleum products, cleaning agents,

paints, adhesives and the like, without

the damage being visible to the user.

7) A helmet has a limited lifespan in use and

should be replaced when it shows obvious

signs of wear.

8) This helmet should not be used by children

while climbing or doing other activities

where there is a risk of hanging or

strangulation if the child gets trapped

whilst wearing the helmet.

9) This helmet is designed only for the

following activity: cycling, roller skate,

skateboard. It is not designed to be used

with mopeds or any other type of sport,

mechanical or not.

Andere LAZER Motorradzubehör Handbücher

LAZER

LAZER Lugano Bedienungsanleitung

LAZER

LAZER X6 Bedienungsanleitung

LAZER

LAZER JAZZ Bedienungsanleitung

LAZER

LAZER Z1 Bedienungsanleitung

LAZER

LAZER TWIST Bedienungsanleitung

LAZER

LAZER Mambo Evo PURE CARBON Bedienungsanleitung

LAZER

LAZER CORSICA Bedienungsanleitung

LAZER

LAZER X7 Bedienungsanleitung

LAZER

LAZER LZ6-BORA Bedienungsanleitung

LAZER

LAZER Volante Bedienungsanleitung

LAZER

LAZER X8 Bedienungsanleitung

LAZER

LAZER Kestrel Bedienungsanleitung

LAZER

LAZER Mambo Evo Bedienungsanleitung

LAZER

LAZER Urbanize Bedienungsanleitung

LAZER

LAZER TANGO Bedienungsanleitung

LAZER

LAZER Victor KinetiCore Bedienungsanleitung

LAZER

LAZER Bayamo Bedienungsanleitung

LAZER

LAZER Century Bedienungsanleitung

LAZER

LAZER SOLANO Bedienungsanleitung

LAZER

LAZER SMX Bedienungsanleitung

LAZER

LAZER Vertigo Bedienungsanleitung

LAZER

LAZER TS+ LED Bedienungsanleitung

LAZER

LAZER JACKAL Bedienungsanleitung

LAZER

LAZER SuperSkin Bedienungsanleitung

Beliebte Motorradzubehör Handbücher anderer Marken

SRC

SRC B-TRK502-01-01-SL Bedienungsanleitung

3M Speedglas 9100 MP Bedienungsanleitung

hepco & becker

hepco & becker 6307520 00 01 Bedienungsanleitung

HOMCOM

HOMCOM AA0-077 Bedienungsanleitung

hepco & becker

hepco & becker 6307558 00 01 Bedienungsanleitung

Wunderkind Custom

Wunderkind Custom 106503-F15 Benutzerhandbuch

Dräger

Dräger HPS 3500 Bedienungsanleitung

M-WAVE

M-WAVE SKI Bedienungsanleitung

Kuryakyn

Kuryakyn 6212 Bedienungsanleitung

hepco & becker

hepco & becker 6507504 00 01 Bedienungsanleitung

Tool it

Tool it PROMAX LCD 9.13G Bedienungsanleitung

Custom Dynamics

Custom Dynamics TruWrapz Bedienungsanleitung

Roof

Roof RO200 CARBON Bedienungsanleitung

Kabuto

Kabuto Japan IBUKI Bedienungsanleitung

PUIG

PUIG 5051 Bedienungsanleitung

rizoma

rizoma ZTH050 Bedienungsanleitung

Joubert

Joubert 10001711 Bedienungsanleitung

Sperian

Sperian Optrel p420 Bedienungsanleitung